PASCO PS-2011 Guide
PASCO Form Number
Description
Date
Revision
013-17442
PS-2011 Battery Replacement Instructions
08-16-22
Page 1 of 3
A
PS-2011; SPARKlink Air Battery Replacement Instructions
Battery Part Number: PS-2569; Li-Poly 2500 mAH
Recommended Equipment: (PS-3299; Battery Replacement Tool Set)
Step 1: Position the SPARKlink Air looking at the back surface as shown below.
Note the location of the (4) T-8 Screws
PASCO Form Number
Description
Date
Revision
013-17442
PS-2011 Battery Replacement Instructions
08-16-22
Page 2 of 3
A
Step 2: Unscrew the (4) T8 Screws with a T8 Screwdriver. While holding the Unit
plastic halves together, turn the SPARKlink Air over and let the (4) screws fall out. Set
the Unit down on a flat surface. Put the screws off the side and lift off the
top cover.
Step 3: Unplug the old battery and plug in the new replacement battery at the location
shown.
PASCO Form Number
Description
Date
Revision
013-17442
PS-2011 Battery Replacement Instructions
08-16-22
Page 3 of 3
A
Step 4: Reverse steps to complete the reassembly.
If you need further assistance, please contact Technical Support at support@pasco.com or
through www.pasco.com on chat. To access chat through your browser, please enable all
cookies on our website.
Table of contents
Other PASCO Camera Accessories manuals
