Patriot Docks PN10922 User manual

www.patriotdocks.com
Aluminum Stairs
Assembly Instrucons
PN10922, 10923, 10924

www.patriotdocks.com
Step One: Assembling Hand Rail Vercal Supports
Insert Hand Rail Support tube (35-5/8” long) into
Mounng Sleeve. Align the two mounng holes in
the tube and sleeve with the mounng holes in
the le or right side Stair Support Assembly. Use
M10x90mm bolts/nuts to fasten the Hand Rail
Support to the Stair Support Assembly.
Mount the 45° Hand Rail Bracket to the top of the
vercal support tube using an M10x60mm bolt/
nut.
Insert Hand Rail tube through both
Hand Rail Brackets and secure using
two M10x60mm bolts/nuts.
Stair Support Assembly
Mounng Sleeve
Vercal Support Tube
Hand Rail Bracket
Hand Rail Tube

www.patriotdocks.com
Step 2: Joining Stair Support Assemblies and Steps
First, aach each Step piece to one of the Stair Support
Assemblies (recommended to start with the Stair Support
with Hand Rail aached). Fasten Steps to the welded
mounng tabs on the rst Stair Support Assembly using
two M6 bolts/nuts each.
Insert welded mounng tabs of the second Stair Support
Assembly into the opposite ends of the Step pieces and
fasten using two M6 bolts/nuts per Step.

www.patriotdocks.com
Mounng to another manufacturer’s
pier
Align ladder in desired locaon, top
of Stair Supports Assemblies should
be ush with the top of the dock.
Use lag screws or drill out mounng
holes and secure using M10 or 3/8”
fasteners.
Step 3: Aaching Drop Legs
Start by inserng the drop leg tube into the at
base and secure using M10x60mm bolt/nut. Next
insert the drop leg tube into the drop leg sleeve
on the Stair Support Assembly, set desired height
and secure using M10x60mm bolt/nut.
Step 4: Mounng to a Patriot dock
Determine desired locaon, ensuring that
the water depth is appropriate for the num-
ber of steps and that the steps will be level.
To install to a Patriot dock, align the top
mounng hole with one of the top 3/8”
mounng holes in the frame, secure rst side
with an M10x40mm bolt. The mounng hole
on the opposite side will then need to be
drilled in the frame and secured using an
M10x40mm bolt/nut.
The Patriot Stairs are designed to combine together to
create longer stair assemblies! Choose the number of
steps needed and combine the corresponding stair
units.
All stair models are able to be converted into free
standing stairs by adding long drop leg assemblies to
the top receivers on the Stair Supports. Reach out to
the manufacturer at www.patriotdocks.com for more
informaon!