Aspire Da Vinci User manual

USER MANUAL
Da Vinci Lift Recline Chair

2 3
Pinch/Crush Points Hazard! Do not
place objects or appendages in the
path of moving parts.
Do not place objects under the
footrest when the lift chair is in
the fully reclined position. Make
sure area is clear of obstructions,
including pets and small children
during operation.
Electrical Hazard
Do not cover or place the external
transformer under the riser recliner.
Keep in an open, well-ventilated
area free from foreign material and
away from possible pinch points.
Read and follow the information in the
owner’s manual. Battery Door Location
Maximum weight capacity
Indoor Use Only. Avoid exposure
to rain, snow, ice, salt or standing
water. Maintain and store in a clean
and dry environment.
Do not connect an extension lead to
the AC/DC converter or the battery
charger.
Class II Equipment
Removal of grounding prong can
create electrical hazard. If necessary,
properly install an approved
3-pronged adapter to an electrical
outlet having 2-pronged plug access.
Green LED indicates power to the
unit is on. Not applicable to all
models.
Properly dispose of all electronic
components, including the external
transformer, hand control, batteries,
actuator motors and wiring. Contact
your authorised Aspire Dealer for
more information.
Degree of protection against
electric shock.
Do not place objects under the lift
chair. Make sure the area is clear
of obstructions, including pets and
small children during operation.
This product has been tested and
complies to IEC 60601-1-2.
ASPIRE ELECTRIC LIFT & RECLINE CHAIRS
The symbols below are used throughout this owner’s manual and on the product to identify warnings
and important information. It is very important for you to read them and understand them completely.
WARNING! Indicates a potentially hazardous condition/situation. Failure to follow
designated procedures can cause either personal injury, component damage or
malfunction. On the product, this icon is represented as a black symbol on a yellow
triangle with a black border.
MANDATORY! These actions should be performed as specified. Failure to perform
mandatory actions can cause personal injury and/or equipment damage. On the
product, this icon is represented as a white symbol on a blue dot with a white border.
PROHIBITED! These actions are prohibited. These actions should not be performed
at any time or in any circumstances. Performing a prohibited action can cause
personal injury and/or equipment damage. On the product, this icon is represented
as a black symbol with a red circle and red slash.
Please fill out the following information for quick reference:
NOTE: This owner’s manual is compiled from the latest specifications and product information
available at the time of publication. We reserve the right to make changes as they become necessary.
Any changes to our products may cause slight variations between the illustrations and explanations
in this manual and the product you have purchased. The latest/current version of this manual is
available on our website.
PRODUCT SAFETY SYMBOLS
The symbols below represent labels used on the product to identify warnings, mandatory actions and
prohibited actions. It is very important for you to read and understand these symbols completely. Do not
remove these labels from your product. Please note that not all of the symbols may be used on your lift
chair model.
LABEL INFORMATION
Aspire Dealer
Address
Phone Number
Purchase Date
Serial Number

4 5
TABLE OF CONTENTS
1. Introduction ...........................................................................................................
2. General Guidelines ...............................................................................................
3. Important Safety Instructions ..........................................................................
4. Warranty ................................................................................................................
5. Assembly/Disassembly .....................................................................................
Cord and Transformer Connections ................................................................
Chair Assembly .....................................................................................................
Operating Your Lift Chair ...................................................................................
Installation of Back-up Batteries .....................................................................
Troubleshooting ...................................................................................................
6. Care & Maintenance ............................................................................................
7. Specifications .......................................................................................................
SAFETY
CONGRATULATIONS on purchasing your Aspire Lift Chair. The product you have purchased combines
state-of-the-art components with safety, comfort and styling in mind. We are confident the design
features will provide you with the conveniences you expect during your daily activities. Understanding
how to safely operate and care for this product should bring you years of trouble-free operation and
service.
Read and follow all instructions, warnings and notes in this manual and all other accompanying literature
before attempting to operate this product for the first time. In addition, your safety depends upon you,
as well as your dealer, carer or healthcare professional in using good judgement.
If there is any information in this manual which you do not understand, or if you require additional
assistance for setup or operation, please contact your authorised Aspire Dealer. Failure to follow the
instructions, warnings and notes in this manual and those located on your Aspire product can result in
personal injury or product damage and will void the Aspire product warranty.
PURCHASER’S AGREEMENT
By accepting delivery of this product, you promise that you will not change, alter or modify this product
or remove or render inoperable or unsafe any guards, shields or other safety features of this product; fail,
refuse or neglect to install any retrofit kits from time to time provided by Aspire to enhance or preserve
the safe use of this product.
INFORMATION EXCHANGE
We want to hear your questions, comments and suggestions about this manual. We would also like to
hear about the safety and reliability of your new lift chair and about the service you received from your
authorised Aspire Dealer. Please notify us of any change of address, so we can keep you apprised of
important information about safety, new products and new options that can increase your ability to use
and enjoy your lift chair.
Please feel free to contact us at the address below:
Australia:
Aidacare Head Oce
Building 3A, 1 Moorebank Avenue,
Moorebank NSW 2170
NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact
us and we will be glad to send you a new one immediately.
1. INTRODUCTION
05
06
08
09
10
10
11
12
13
13
14
15
NOTE: When placing the furniture on non-carpeted flooring, Aspire recommend
the use of floor protection such as an area rug or furniture pads. Area rugs and
padding not included with purchase.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause
undesired operation of the device. Modifications not approved by the party
responsible for compliance could void user’s authority to operate the equipment.

6 7
Your lift chair is a state-of-the-art life-enhancement device designed to increase mobility. Please be
aware that the final selection and purchasing decision regarding the type of lift chair to be used is the
responsibility of you, the lift chair user, if capable of making such a decision, and/or your healthcare
professional (i.e., medical doctor, allied health professional, therapist, etc.).
MANDATORY! Read and follow the information provided in this owner’s manual
before attempting to operate your lift chair for the first time.
There are certain situations, including some medical conditions, where you will need to practice
operating the lift chair in the presence of a trained attendant. A trained attendant can be defined as a
family member or healthcare professional specially trained in assisting you with performing various daily
living activities while safely operating a lift chair.
Below are some precautions, tips and other safety considerations that will help you become accustomed
to operating the lift chair in a safe manner.
MODIFICATIONS
Aspire chairs are designed and engineered to provide maximum comfort and utility. However, to prevent
personal injury and/or damage to your lift chair, you should not modify, add, remove or disable any
feature, part or function of your lift chair. Unauthorised modifications may also void your product’s
warranty.
NOTE: Use Aspire approved parts only for all repairs and replacements.
WEIGHT LIMITATIONS
Your lift chair is rated for a maximum weight capacity. Refer to “Appendix A” for more information.
MANDATORY! Stay within the specified weight capacity of your lift chair. Failure
to do so may result in injuries and/or product damage, Aidacare will not be held
responsible for any such issues/failures.
PINCH/CRUSH HAZARDS
The scissor and lift mechanisms are labelled as pinch/crush point hazards on your lift chair. Keep clear of
these areas and make sure the path of motion is unobstructed. .
WARNING! Do not place objects or appendages in the path of moving parts.
DEGREE OF PROTECTION/MODE OF OPERATION
• Class II equipment/Type B protection against electric shock
• Degree of protection against the ingress of solid/liquids—IPX0
2. GENERAL GUIDELINES
ELECTROMAGNETIC AND RADIO FREQUENCY INTERFERENCE (EMI/RFI)
WARNING! Laboratory tests have shown that electromagnetic and radio frequency
waves can have an adverse aect on the performance of electrically-powered
devices, such as lift chairs.
Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones,
mobile two-way radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM)
transmitters, wireless computer links, Wifi, microwave signals, paging transmitters and medium-range
mobile transceivers used by emergency vehicles. In some cases, these waves can cause unintended
movement or damage to the control system of electrically-powered devices. The lift chair user can
help prevent electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment. It is recommended that at least 3 metres (9 feet) of distance be
maintained between the lift chair and any handheld equipment emitting 10 W or more of output power.
Refer to the manufacturer’s literature for the handheld device to determine the maximum output power
of that device.
Every electrically-powered device has an immunity (or resistance) to EMI. The higher the immunity level,
the greater the protection against EMI. Per EMC standards, this product has passed immunity testing
and is rated as a Group 1, Class B product, meaning the lift chair uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby
electronic equipment making the lift chair suitable for use in all establishments, including domestic
establishments and hospitals.
WARNING! Be aware that cell phones, two-way radios, laptops and other types of
radio transmitters may cause unintended movement of your electrically-powered
device due to EMI. Exercise caution when using any of these items while operating
your lift chair.
WARNING! The addition of accessories or components to the lift chair can increase
the susceptibility of the chair to EMI. Do not modify your lift chair in any way not
authorised by Pride.
WARNING! Your lift chair itself can disturb the performance of other electrical
devices located nearby, such as alarm systems.
NOTE: If unintended motion occurs, discontinue use of the lift chair. Contact Aidacare to report the
incident.
SHIPPING AND DELIVERY
Before using your lift chair, make sure your delivery is complete as some components may be packaged
individually. If you do not receive a complete delivery, please contact your authorised Aspire Dealer
immediately. Where damage has occurred during transport, either to the packaging or content, please
contact the delivery company responsible.
MOTOR VEHICLE TRANSPORT
If you will be transporting your lift chair in a motor vehicle, individual components (external transformer,
etc.) should be secured. The lift chair itself must also be secured (a possible hazard during vehicle
braking).
LUKE TO CONFIRM

8 9
READ ALL INSTRUCTIONS BEFORE USING.
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons:
• DANGER: To reduce the risk of electric shock, always unplug this furnishing from the
electrical outlet before cleaning
• Unplug from outlet before putting on or taking o parts
• Close supervision is necessary when used by (or near) children and disabled
people
• Use this furnishing only for its intended use (as described in these instructions).Do not use
attachments not recommended by the manufacturer
• Never operate this furnishing if it has a damaged cord or plug, if it is not working
properly, if it has been dropped/damaged, or dropped into water
• Keep the cord away from heated surfaces
• Never drop or insert any object into any opening
• Do not use outdoors. Just for household, indoor use only
• Do not operate where aerosol (spray) products are being used, or where oxygen
is being administered
• To disconnect, turn all controls to the o position, then remove plug from outlet
• WARNING: Risk of injury - keep children away from extended legrest
• WARNING: Risk of injury to persons - do not use this furnishing to support video
equipment, such as televisions or computer monitors
• When not in use, it is recommended the hand control be stored securely in the pocket on
the outside of the arm
SAVE THESE INSTRUCTIONS
SERVICING OF DOUBLE-INSULATED PRODUCTS:
In a double-insulated product, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated product, nor is a means for grounding
to be added to the product. Servicing a double-insulated product requires extreme care and
knowledge of the system, and is to be done only by qualified service personnel. Replacement
parts for a double-insulated product must be identical to the parts they replace.
3. IMPORTANT SAFETY INSTRUCTIONS
FIVE-YEAR LIMITED WARRANTY
For five (5) years from the date of purchase, Aspire will repair or replace at our option to the
original purchaser any of the following parts found upon examination by an authorised represent-
ative of Aspire to be defective in material and/or workmanship:
• Steel Frame
• Motor
• Scissor Mechanisms
• Steel Lift Mechanism
NOTE: Aspire reserves the right to replace only the part of the steel lift mechanism that may
be defective. Aspire provides parts only under warranty. Your Aspire Dealer is responsible for
labour and service. Please contact your Aspire Dealer for information about these services and
for any applicable charges.
TWO-YEAR FABRIC WARRANTY
Aspire guarantees to replace any fabric that is found to be faulty as a result of manufacturing
defect and which has been used in accordance with our manu facturer performance ratings and
care instructions. An evaluation of fabric related issues must be conducted before confirmation of
warranty coverage can be verified. Aspire recommends stain resistant treat ment before use.
CONSUMER WARRANTY AGAINST DEFECTS:
Aspire does not warrant against excessive or incorrect use, modification or any situation that
could not be deemed as fair wear and tear. This is a back to base warranty and does not cover
freight costs pertaining to the return of any items under warranty. Aspire acknowledges and
conforms to all ACCC guidelines around consumer rights.
Aspire will not warrant the safety and or correct functioning of products where any original
components have been changed or modified by non-Aspire approved and trained service
and maintenance sta or external providers. Furthermore, safety is not guaranteed where
components have been replaced with non-original Aspire approved parts. If any faults are
detected upon receipt of this product please contact Aspire. Any faults that are detected during
normal use should be reported to Aspire immediately to determine if warranty conditions apply
and if so, the necessary repair or replacement work to be completed.
4. WARRANTY
WARRANTY DURATION
Frame: 5 Years
Mechanisms: 5 Years
Electronics: 2 Years
Handset and Cable: 2 Years
Fabric: 2 Years

10 11
CHAIR ASSEMBLY: ATTACHING THE
CHAIR WINGS TO THE CHAIRBACK
1. Slide the metal inserts on the chair’s
wings into the metal sleeves on the
side of the chair back
2. Slide the wings down until
they are completely set on the
back’s metal sleeves
5. ASSEMBLY/DISASSEMBLY
CORD AND TRANSFORMER CONNECTIONS
Once the box has been removed from around the chair, you’ll notice the back is resting on top of
the seat. There are a couple of items to remove from the seat portion of the chair first.
Follow the steps below:
1. Remove the zip tie holding the plastic bag with the Power Transformer, hand control and its
cord on the left
2. Remove the hand control from the plastic bag and connect it to the female plug located in
the left side pocket on the outside of the chair’s arm
3. Connect the Power Transformer to the plug coming from the chair
4. Connect the Power Cord into the Power Transformer
5. Connect the Power Cord into an electrical outlet, near where the chair will be positioned
CHAIR ASSEMBLY: ATTACHING THE CHAIR BACK TO THE CHAIR BASE
CAUTION: PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING ASSEMBLY
PROCESS. IT IS RECOMMENDED TO USE TWO PEOPLE WHEN ASSEMBLING AND REMOVING
THE INSIDE BACKS TO AND FROM THE BASE OF THE FURNITURE.
1. Slide inside back receivers onto the steel mechanism posts in the base of the chair (Figure A)
2. Press both sides of the back firmly into place until the back automatically locks into place
3. To remove the back from the base, use a screwdriver pressing outward on the black tab in
the metal receivers on both sides of the chair back and lift the back from the base of the
chair (Figure B)
4. Connect the Headrest and Lumbar cable plugs (Figure C). Headrest-only models feature one
less set of cables

12 13
OPERATING YOUR LIFT CHAIR INSTALLATION OF BACK-UP BATTERIES
2 x 9 Volt back-up batteries will lift the chair from the reclined position to the seating position
one cycle in case of a power failure. If a power failure occurs and the chair is cycled, the 2-9 Volt
batteries will need to be replaced.
1. Removed the sliding door on
the side of the transformer to
locate the 2 - 9 Volt batteries
2. Pull out the 2- 9 Volt batteries
and replace with new batteries
3. Replace door on the
transformer
4. Batteries not included
TROUBLESHOOTING
PROBLEM POSSIBLE FACTORS SOLUTIONS
The chair doesn’t recline
or lift
The transformer may not
be connected
Check the power supply
has been correctly
connected to the socket
and confirm the wire from
chair to transformer is
firmly connected
The headrest or lumbar
doesn’t work
The headrest or lumbar
motor may not be
connected
Check the headrest and
lumbar motor has been
correctly connected to the
socket
The headrest and lumbar
work oppositely
The headrest and lumbar
motor plug
Check the headrest and
lumbar motor has been
correctly connected to the
socket
The hand control doesn’t
work
The hand control may not
be connected
Check the hand control
cord has been correctly
connected to the socket

14 15
6. CARE AND MAINTENANCE
Your Aspire Lift Chair will require routine maintenance checks. You can perform some of these checks,
but others may require assistance from an authorised Aspire Dealer. By following the maintenance
checks in this section as scheduled, you can help ensure your lift chair gives you years of trouble-free
operation. If you have any questions regarding your lift chair’s care, contact your authorised Aspire
Dealer.
FABRIC CARE
• Inspect the fabric on a regular basis for any pulls, tears or gaps
• Fabric care instructions can be found on the tag under the headrest cushion
WARNING! Fabric should not be allowed to come in direct contact with any type of
heat source (e.g., a space heater or cigarette). Personal injury or fire damage may
occur.
WARNING! It is strongly recommended that you do not smoke cigarettes while
seated in or using your lift chair, although the lift chair has passed the necessary
testing requirements for cigarette smoking. You must adhere to the following safety
guidelines if you decide to smoke cigarettes while seated in or using your lift chair.
• Do not leave lit cigarettes unattended
• Keep ashtrays a safe distance from the lift chair
• Always make sure cigarettes are completely extinguished before disposal
NOTE: Do not use solvent-type cleaners to spot clean. Do not saturate the fabric. Prevent damage to
the fabric; do not expose the lift chair to direct sunlight.
ELECTRONICS CARE
• Inspect all wiring harnesses to make sure they are not damaged or frayed
• If damage is present, unplug the lift chair and contact your authorised Aspire Dealer for service
• Keep all electronics free from moisture and temperature extremes
• Aspire Lift Chairs are intended for indoor use only!
WARNING! Even though the lift chair has passed the necessary testing requirements
for ingress of liquids, you should keep electrical connections away from sources
of dampness, including direct exposure to water or bodily fluids and incontinence.
Check electrical components frequently for signs of corrosion and replace as
necessary.
WARNING! Plastic bags are a suocation hazard. Dispose of plastic bags properly
and do not allow children to play with them.
7. SPECIFICATIONS
DISTANCE
FROM WALL
OVERALL
DEPTH
OVERALL
HEIGHT
OVERALL
WIDTH S.W.L
kg
SEAT
DEPTH
SEAT
HEIGHT
SEAT
WIDTH
SEAT TO TOP
OF BACK
CHP227500 Aspire
Da Vinci Recliner
(Latte)
480 mm 510 mm 530 mm 630 mm 950 mm 1055 mm 810 mm 650 mm 159kg
CHP227510 Aspire
Da Vinci Recliner
(Gunmetal)
480 mm 510 mm 530 mm 630 mm 950 mm 1055 mm 810 mm 650 mm 159kg
CHP227520 Aspire
Da Vinci Recliner
(Fog)
480 mm 510 mm 530 mm 630 mm 950 mm 1055 mm 810 mm 650 mm 159kg
CHP227530 Aspire
Da Vinci Recliner
(Dove)
480 mm 510 mm 530 mm 630 mm 950 mm 1055 mm 810 mm 650 mm 159kg
MANDATORY! Stay within the specified weight capacity of your lift chair.
Exceeding the weight capacity voids Aspire Lift Chair warranty.

AIDACARE PTY LTD
Building 3A, 1 Moorebank Avenue,
Moorebank NSW 2170
1300 133 120
www.aidacare.com.au
MADE IN CHINA
ASUM44.2 180619