
Operating the Handheld UVClean™Wand
Open the battery cover. Insert 4 AA Alkaline batteries (Not Included)
into the battery compartment and close the cover. (Fig. 1) Make sure
the Handheld Wand UVC bulb is face down. Press the Power button
once (Fig 2). The LED indicator light will turn on and the UV lamp will be
lit up and ready to begin the sterilization process.
Start surface cleaning. With the Sterilization Wand on and face down,
hover over the surface to be sterilized.
After sterilization is complete, turn the Power button to “Off” (Fig 3).
NEVER turn the wand with the lamp facing toward you during
operation. (Fig 4.)
Do not use the UVC sterilizer on any part of human body and do
not look at the UVC bulb while the Wand is in operation.
Product Specifications
Model: PP14A
Wattage: 4W
Dimensions: 10.43×1.61×1.50“, 26.5x41x38mm
Weight: .44 lb, .2 kg
Color: White
Product Material: ABS Material
Bulb Lifespan: 30,000 hours
Power Supply: Alkaline battery (4 xAA)
UV wavelength: 254nm
Sterilizing Area: Direct
Way to Control: On/Off button with auto shutoff function
Disclaimers: Germicidal ultraviolet lamps pose imminent danger if used without taking the proper
precautions. Avoid exposure to direct or reflected germicidal ultraviolet rays since they cause painful
eye irritation and reddening of the skin. Under no circumstances should any direct germicidal UV-C
unit be permitted to operate with humans, plants, or animals present in the operation area.
Warranty: Product is covered under a 6-month replacement warranty against manufacturing defects.
Warranty is null and void if the product is damaged physically by the consumer; the product is repaired,
maintained, modified, and disassembled.