Paxton ins-30211 User manual

ins-30211

1
Ø 5/16"
Ø 13/8"
Ø 15/16"
Paxton
≤45º
≤45º
0 11
1/41/4 3/43/4 1/21/21/43/4 1/21/43/4 1/21/4 1/4 3/41/2 1/4 3/41/2 1/4
22 33
0 11
1/41/4 3/43/4 1/21/21/43/4 1/21/43/4 1/21/4 1/4 3/41/2 1/4 3/41/2 1/4
22 33
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
1x
4x
1x
2x
2x
1x
1x
2x
2x 2x
2x
1x
Ø5/16"/Ø 8mm

2
43
21
1.5"
Ø1/"
38mm
2/"
2/"
Exterior
Extérieur
Ø5/16"
Ø8mm
Ø24mm
Ø35mm
Ø15/16"
Leave at least one thread showing so the two parts
can freely turn in both directions when tted.
Laissez au moins un letage visible an que les deux
pièces puissent tourner librement dans les deux
directions une fois installé.
Deje al menos una rosca de tornillo a la vista para que
las dos partes puedan girar libremente en ambas
direcciones al ajustarse.
EN
F
ES

3
7
65
m4 x /"
m3 x /"
8

4
9
11
m4
-Don’t over tighten
-ne pas trop serrer
-no apretar demasiado
!
12
10

5
1413
15 16
m4 x 1/"
1
2
12
32
17 2
1
3 mm
12

6
32
17 2
1
3 mm
12

7
45
6http://paxton.info/3101

8
!
+
-

9
43
2
3 mm
1

10
6
5
1..2..3

11
Standalone
43
12
Paxton
Paxton
1. At installati
reader to v
2. Tore-v
user token
More info:
Paxton
Paxton

12
Standalone
21
56
Paxton
FUNCTION CARD
Enrolment card
1.At installation, present this card to the
readerto validate the tokens in this pack
2.To re-validate a user token present this
enrolmentcard to the reader followed by the
usertoken
1. At installati
reader to v
2. Tore-v
user token
More info:
Paxton
Paxton

13
Standalone
65
34
Paxton
Paxton

14
Standalone
43
21
Paxton
FUNCTION CARD
Enrolment card
1.At installation, present this card to the
readerto validate the tokens in this pack
2.To re-validate a user token present this
enrolmentcard to the reader followed by the
usertoken
1. At installati
reader to v
2. Tore-v
user token
More info:
Paxton
Paxton

15
65
Paxton
Paxton
FUNCTION CARD
Silent Operation
Present this Card to Silence the beeping noises
made by the reader. Present this card again to
renable the beeping noises.
Standalone

16
0 m
3m
15m
20m
30m
50ft
65ft
100ft
10ft
0 ft

17
xxx- xxx
≤ 50000
4 x AA Alkaline
IEEE 802.15.4
3m - 15m
900-100WT
900-100BL
900-200WT
900-200BL
-20°C +55°C
≤ 10 mm
10 ft - 65 ft
-4°F +131°F
-0°C +49°C
-32°F +120°F
35 - 57 mm
IP55
6V
800mA

18
[phone]
paxton.support
[e-mail]
877.438.7298
usapaxton.support
[e-mail]
[phone]
paxton.benelux.support
[e-mail]
[phone]
paxton.benelux.support
[e-mail]
[phone]
paxton.gmbh.support
[e-mail]
[phone]
[e-mail]
paxton.support
[phone]
[e-mail]
paxton.support
8000 3570 3783
paxton.support
[e-mail]
[phone]
paxton.soporte
[e-mail]
[phone]
paxton.soporte
[e-mail]
[phone]
paxton.support
[e-mail]

19
[phone]
paxton.support
[e-mail]
877.438.7298
usapaxton.support
[e-mail]
[phone]
paxton.benelux.support
[e-mail]
[phone]
paxton.benelux.support
[e-mail]
[phone]
paxton.gmbh.support
[e-mail]
[phone]
[e-mail]
paxton.support
[phone]
[e-mail]
paxton.support
8000 3570 3783
paxton.support
[e-mail]
[phone]
paxton.soporte
[e-mail]
[phone]
paxton.soporte
[e-mail]
[phone]
paxton.support
[e-mail]
The declaration of conformity is available on request. Contact details are provided at:
http://paxton.info/596
These products are not suitable for retail sale. All warranties are invalid if these products are not installed
by a competent person.
Parts of this product are Copyright (c) 2013-2015 Atmel Corporation. All rights reserved. Redistribution and use in source and binary forms,
with or without modication, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the docu-
mentation and/or other materials provided with the distribution.
3. The name of Atmel may not be used to endorse or promote products derived from this software without specic prior written permission.
4. This software may only be redistributed and used in connection with an Atmel microcontroller product.
THIS SOFTWARE IS PROVIDED BY ATMEL“AS IS”AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE EXPRESSLY AND SPECIFICALLY
DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (IN-
CLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.