PB TEEN Sleep & Study Loft Bed User manual

Date – 02-July-2012 www.pbteen.com Page 1/3
Sleep & Study Loft Bed – Headboard/Footboard
PRE-ASSEM LY:
• For your safety and ease, assembly by two adults is recommended.
• Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly when
used in conjunction with the assembly instructions.
• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The shipping
box provides and ideal work surface. Do not dispose of any contents until assembly is completed to avoid
accidentally discarding small parts or hardware.
• Use the parts and hardware lists to identify and separate each of the pieces included prior to starting assembly.
• Note: DO not fully tighten the bolts until all parts are in place. Failure to follow these instructions may cause the
bolts to misalign during assembly.
• Do not use power drill as it may cause cracking.
Assembly Instructions 3 of 4

Date – 02-July-2012 www.pbteen.com Page 2/3
HAR WARE LIST
(A5) Allen Key – 1x
(A6) olt 1/4” x 51mm – 18x
(A7) Half-Moon Metal lock – 14x
ASSEM LY INSTRUCTIONS:
1. Place F Top Panel ( 1, no moldings on left/right end) and F ottom Panel ( 4) on a soft, scratch-free
surface with oval cut-outs facing up. Attach F Front Post ( 3) to F Top Panel ( 1) and F ottom Panel
( 4), place (4) Half-Moon Metal locks (A7) onto the cut-outs and insert (4) olts (A6) to secure by using
Allen Key (A5). Repeat with F Rear Post ( 2). Do not fully tighten connecting bolts.
A1
A2
A3
A4
B1
B2
B3
B4
PARTS LIST
A1). H Top Panel – 1pc
A2). H Rear Post – 1pc
A3). H Front Post – 1pc
A4). H ottom Rail – 1pc
TOOLS REQUIRED:
Philips Screwdriver
(Not included)
1). F Top Panel – 1pc
2). F Rear Post – 1pc
3). F Front Post – 1pc
4). F ottom Panel – 1pc
Headboard
(H )
Footboard
(F )
A6
8x
A7
8
x

Date – 02-July-2012 www.pbteen.com Page 3/3
2. Place H Top Panel (A1, molding on one end) and H ottom Rail (A4) on a soft, scratch-free surface with
oval cut-outs facing up. Attach H Front Post (A3) to F Top Panel (A1) and F ottom Rail (A4), place (3)
Half-Moon Metal locks (A7) onto the cut-outs and insert (3) olts (A6) to secure by using Allen Key (A5).
Repeat with F Rear Post (A2). Do not fully tighten connecting bolts.
3. Insert (4) olts (A6) from top of the assembled H /F to secure top rails to each H /F post by using Allen
Key (A5). Check alignments and tighten all connecting bolts.
4. Assembly of H /F components completes.
CARE INSTRUCTIONS:
• Dust with a clean, soft cloth.
• Avoid the use of chemicals and harsh cleaning agents.
A5.
A6.
A7.
A1
A3
A2
A4
A6
6x
A6
4x
A7
6
x