PB TEEN Ultimate User manual

Ultimate Cabinet Base
PRE-ASSEMBLY:
•Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface (the
shipping box provides an ideal work surface). This will avoid damaging any parts during assembly.
•Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
•Avoid the use of a power tools as it may cause damage.
PARTS INCLUDED:
A - Base Frame - 1pc
B - Legs - 4pcs
HARDWARE INCLUDED:
C - Bolts (5/16" x 2") – 8pcs
D - Flat Washer (5/16") – 8pcs
E - Spring Washer (5/16") - 8pcs
F - Allen Key (4mm) – 1pc

ASSEMBLY INSTRUCTIONS:
1. Lay the Base Frame (A) upside down on a clean scratch free surface and position one Leg (B) exactly as
shown below. Align the pre-drilled holes of the Leg (B) with the pre-drilled holes in the corner braces of the
Base Frame (A). (Fig.1).
2. Attach the Legs (B) by inserting the Bolt (C) into the Spring Washer (E), then the Flat Washer (D), and finally
through the corner braces and into the Leg (B). Tighten with the enclosed Allen Key (F). Repeat the same
process in Fig.1 for the other 3 Legs (B).
3. Carefully turn the Base Frame assembly upright. (Fig. 2) If necessary, adjust the levelers on the bottom of the
Legs (B) by turning, so the assembly is balanced.
Fig. 1
Fig.2
CARE INSTRUCTIONS:
•Dust often using a soft, dry cloth.
•Do not use glass cleaner, abrasives, wax or household cleaners on wood.

Ultimate Shelf Cabinet
PRE-ASSEMBLY:
•Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface (the
shipping box provides an ideal work surface). This will avoid damaging any parts during assembly.
•Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
•Avoid the use of a power tools as it may cause damage.
PARTS INCLUDED:
A - Top Cover Panel - 1pc
B - Shelf Cabinet - 1pc
HARDWARE INCLUDED:
C - Allen Bolts (1/4" x 1") – 4pcs
D - Allen Key (4 mm) – 1pc
E - Plastic Cap –1pc
F – Cabinet Base – 1pc
TOOL REQUIRED (but not included):
•Phillips Head Screwdriver

ASSEMBLY INSTRUCTIONS:
1. Lay the Shelf Cabinet (B) on its back on your work surface and position the Cabinet Base (F) exactly as shown
in illustration below. Align the pre-drilled holes of the Cabinet Base (F) with the pre-drilled holes on the
underside of the Shelf Cabinet (B). Attach the Cabinet Base (F) to the Shelf Cabinet (B) by inserting the Allen
Bolt (C) through the pre-drilled holes on the underside of the Cabinet Base (F) and into the pre-drilled holes on
the underside of the Shelf Cabinet (B). Repeat the same process for the other pre-drilled holes. Tighten with
the enclosed Allen Key (D). See Fig. 1. Carefully turn the cabinet upright.
FIG. 1
2. Place the Top Cover Panel (A) on top of Shelf Cabinet (B).
3. OPTIONAL: If you wish to stack another unit on top, remove the Top Cover Panel (A). If mouse hole is not in
use, cover this hole with the Plastic Cap (E) provided. Position the stacking cabinets as shown below. Insert
an Allen Bolt (C) through the underside of the top of the base cabinet and into the pre-drilled holes on the
underside of the top cabinet. Repeat the same process for the other pre-drilled holes. Tighten the
connections securely with the Allen Key (D).
CARE INSTRUCTIONS:
•Dust often using a clean, soft, dry lint-
free cloth.
•Blot spills immediately, and wipe with
a clean, damp, cloth.
•We do not recommend the use of
chemical cleansers, abrasives, or
furniture polish on our lacquered
finish.
•Do not sit or stand on the top of the
unit.

Ultimate 2 Door Cabinet
PRE-ASSEMBLY:
•Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface (the
shipping box provides an ideal work surface). This will avoid damaging any parts during assembly.
•Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
•Avoid the use of a power tools as it may cause damage.
PARTS INCLUDED:
A - Top Cover Panel - 1pc
B - 2 Door Cabinet - 1pc
HARDWARE INCLUDED:
C - Allen Bolts (1/4" x 1") – 4pcs
D -Bolt (3/16” x 1-1/4”) – 2pcs
E - Knob – 2pcs
F - Allen Key (4 mm) – 1pc
G - Plastic Cap – 1pc
H – Cabinet Base – 1pc
TOOLS REQUIRED (but not included):
•Phillips Head Screwdriver

ASSEMBLY:
1. Attach the Knobs (E) to the doors by placing the Knob (E) over the pre-drilled hole on the door front. Insert the
Bolt (D) from inside the door and screw into the Knob (E) using a Phillips Head Screwdriver. See Figure 1.
FIG. 1
2. Lay the 2 Door Cabinet (B) on its back on your work surface and position the Cabinet Base (H) exactly as
shown in illustration below. Align the pre-drilled holes of the Cabinet Base (H) with the pre-drilled holes on the
underside of the 2 Door Cabinet (B). Attach the Cabinet Base (F) to the 2 Door Cabinet (B) by inserting the
Allen Bolt (C) through the pre-drilled holes on the underside of the Cabinet Base (F) and into the pre-drilled
holes on the underside of the 2 Door Cabinet (B). Repeat the same process for the other pre drilled
holes.Tighten with the enclosed Allen Key (F). See Fig. 2.Carefully turn the cabinet upright.
Fig.2

3. Place the Top Cover Panel (A) on top of Shelf Cabinet (B)
4. OPTIONAL: If you wish to stack another unit on top, remove the Top Cover Panel (A). If mouse hole is not in
use, cover this hole with the Plastic Cap (G) provided. Position the stacking cabinets as shown below. Insert
an Allen Bolt (C) through the pre-drilled holes on the underside of the top of the bottom cabinet and into the pre-
drilled holes on the underside of the top cabinet, as shown below. Repeat the same process for the other pre-
drilled holes. Tighten the connections securely with the Allen Key (F) provided.
CARE INSTRUCTIONS:
•Dust often using a soft, dry cloth.
•Do not use glass cleaner, abrasives, wax or household cleaners on wood.