PC Locs Lockncharge iJ36 User manual

QUICK START
what’s included?
Visit our website for detailed instructions
and setup video.
www.lockncharge.com/support (International)
www.pclocs.com.au/support (AUS and NZ)
*Power cord supplied to suit specic countries/regions.
iJ36 CART
x2
x2
x2
x1
x1
x1*
x36
x2

1 2
3Use a piece of packing foam for protection when carefully
laying down the cart
Loosen the thumbscrew and slide
keyholes over the studs to remove
the cable management cover.
Connect the device power adaptors
in the base of the cart and route the
device cables through the strap as
shown. Fasten the cable to the cover
using the strap. Replace the cable
management cover.
TO DEVICE
TO POWER
UP
x4
(2 braked, 2 non-braked)

4
5
Populate racks with notebook devices and plug
the charging cables to commence charging.
Adjust the length of charging cables if necessary.
* Notebook devices not included
May need to compress the rack
slightly to t on the tray

www.lockncharge.com (International)
www.pclocs.com.au (Australia and New Zealand)
6
1 2
Refer to ECO Safe ChargeTM User Instruction for
operation guide.
Visit our product support page online to view
the ECO Safe ChargeTM video instruction