PCE Health and Fitness PCE-CT 25FN User manual

© PCE Instruments
PCE-CT 25FN Coating Thickness Gauge
User Manual
User manuals in various languages (français,
italiano, español, português, nederlands, türk, polski,
русский, 中文) can be found by using our
product search on: www.pce-instruments.com
Last change: 16 October 2020
v1.0
English

© PCE Instruments
Contents
1Safety notes........................................................................................... 1
2Specifications........................................................................................2
2.1 Technical specifications ................................................................................................... 2
2.2 Delivery scope.................................................................................................................. 2
3System description............................................................................... 3
3.1 Device.............................................................................................................................. 3
3.2 Display and function keys................................................................................................. 4
4Operation ............................................................................................... 5
4.1 Insert / replace battery...................................................................................................... 5
4.2 Make a measurement....................................................................................................... 5
4.3 Zero calibration ................................................................................................................ 5
4.4 Settings............................................................................................................................ 5
5Troubleshooting....................................................................................6
6Warranty.................................................................................................6
7Disposal ................................................................................................. 6

© PCE Instruments
1
1 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The
device may only be used by qualified personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and
not covered by our warranty.
•The device must only be used as described inthis instructionmanual. If used otherwise,
this can cause dangerous situations for the user and damage to the meter.
•The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specifications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
•Do not expose the device to shocks or strong vibrations.
•The case should only be opened by qualified PCE Instruments personnel.
•Never use the instrument when your hands are wet.
•You must not make any technical changes to the device.
•The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,
no abrasives or solvents.
•The device must only be used with accessories from PCE Instruments or equivalent.
•Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
•Do not use the instrument in explosive atmospheres.
•The measurement range as stated in the specifications must not be exceeded under
any circumstances.
•Non-observance of the safety notes can cause damage to the device and injuries to
the user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.

© PCE Instruments
2
2 Specifications
2.1 Technical specifications
Ferromagnetic metals
F
Non-ferromagnetic metals
N
Measuring principle
Magnetic induction
Eddy current
Measurement range
0 ... 1500 µm
Accuracy
±(3 % + 1 µm)
Resolution
0 ... 100 µm: 0.1 µm;
>100 µm: 1 µm
Calibration
User calibration is supported
Statistical functions
Number of measurements, average value, minimum, maximum
Units of measurement
µm, mm, mils
Measuring area
Diameter 20 mm
Material thickness of
substrate
0.30 mm
0.05 mm
Radius convex
5 mm
Radius concave
25 mm
Measuring frequency
max. 2 measurements per second
Power supply
9 V block battery
Operating conditions
-10 °C ... +50 °C
20 % ... 90 % RH, non-condensing
Storage conditions
-10 °C ... +60 °C
20 % ... 90 % RH, non-condensing
Dimensions
143 mm x 85 mm x 39 mm
Weight
100 g
Material
ABS
2.2 Delivery scope
1 x coating thickness gauge PCE-CT 25FN
1 x calibration set
•Fe zero standard
•NFe zero standard
•calibration foil 49 µm
•calibration foil 100 µm
•calibration foil 254 µm
•calibration foil 503 µm
•calibration foil 984 µm
1 x 9 V block battery
1 x user manual

© PCE Instruments
3
3 System description
3.1 Device
1. Display
2. Keypad
1. Sensor with contact surface
2. Trigger
3. Battery compartment cover

© PCE Instruments
4
3.2 Display and function keys
1. Material Fe or N
2. Current statistics display
3. Battery charge level
4. Automatic power off
5. Current unit of measurement
6. Measured value
7. Statistical value for (2)
8. Automatic sensor selection
Key functions
Key
Press and release
Press and hold
F1
Change µm, mm, mils
Deleting the statistical values
F2
Display backlight on/off
Device on/off
F3
Changing the statistics display
Start of zero calibration

© PCE Instruments
5
4 Operation
4.1 Insert / replace battery
- Open the battery compartment cover on the front of the handle (the cover can be unfolded)
- Connect new 9 V block battery
- Insert the battery and close the cover.
If the battery icon indicates a low battery level, the battery must be replaced. A lack of voltage
affects the stability and reliability of the device.
4.2 Make a measurement
Ensure that the measuring surface is large enough, that the material thickness and, in the case
of curved objects, the radius of curvature are in accordance with the specifications of the unit.
Switch on the meter by pressing and holding the key in the middle. When switching on the meter,
do not place its contact surface on metals - keep at least 2 cm distance from metals. Otherwise,
"0L" will be displayed while the meter is placed on the metal detectedduring start-up and incorrect
readings will be displayed when placed on other surfaces.
Place the circular contact surface of the device as perpendicular as possible to the measuring
location. The surface of the sensor which is mounted on a spring should rest on the test surface
evenly. Apply the trigger. A short beep sounds and the measured value appears in the display.
4.3 Zero calibration
It is recommended to perform a zero calibration regularly to increase the accuracy of the
measurements. Prepare an uncoated sample (one each for ferromagnetic (Fe) and non-
ferromagnetic (N) metals) or use the zero standards supplied.
With the meter switched on, press the right key until you hear a double beep and the text "ZERO"
appears and flashes on the display. Place the sensor contact surface of the tester vertically on
the sample and apply the trigger. It beeps briefly and the word "ZERO" appears in the display.
Briefly press the right key to finish the calibration process.
4.4 Settings
Display backlight
Pressing and releasing the middle key switches the display backlight on or off.
Change units
Press and release the left key to switch between the units µm, mm, mils.
Display and delete statistical values
Press and release the right key to switch between the display of the MEAN value, NO count,
minimum value MIN and maximum value MAX. The instrument can save 80 values. When you
continue measuring, the oldest value is overwritten. After switching off the meter, the values are
deleted. You can also delete the values by pressing and holding the left key.
Auto Power Off
The unit switches off if no key has been pressed for 3 minutes or if the battery is low. An acoustic
signal sounds before the unit is switched off. If you press the trigger for a new measurement
immediately after the sound or press one of the keys briefly, the statistical data is retained.

© PCE Instruments
6
5 Troubleshooting
Display "OL“
“OL" appears on the display if the measurement range is exceeded (coating thicker than 1.5
mm). This device can only measure coatings up to 1.5 mm. For thicker coatings, a different
meter will be required.
“OL" also appears if the contact surface of the device was closer than 2 cm to metals. Restart
the meter while keeping a sufficient distance.
Imprecise measured values, no display
Remove the battery and reinsert it after waiting at least 5 seconds. If this does not help or if
inserting a new battery does not help, you can reset the instrument to factory settings. To do this,
switch off the device and then press the key in the middle until AS appears on the display. When
you release thekey, the device is reset to factory settings. Then check themeasurement accuracy
with the zero standards from the calibration set. If necessary, perform the zero calibration
described in chapter 4.3.
6 Warranty
You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms.
7 Disposal
For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.

© PCE Instruments
7
PCE Instruments contact information
Germany France Spain
PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L.
Im Langel 4 23, rue de Strasbourg Calle Mayor, 53
D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete)
Deutschland France España
Tel.: [phone] Téléphone: [phone] Tel. : [phone]
Fax: [phone] Numéro de fax: [phone] Fax: [phone]
[email protected] [email protected] [email protected]
www.pce-instruments.com/deutsch www.pce-instruments.com/french www.pce-instruments.com/espanol
United Kingdom Italy Turkey
PCE Instruments UK Ltd PCE Italia s.r.l. PCE Teknik Cihazları Ltd.Şti.
Unit 11 Southpoint Business Park Via Pesciatina 878 / B-Interno 6 Halkalı Merkez Mah.
Ensign Way, Southampton 55010 Loc. Gragnano Pehlivan Sok. No.6/C
Hampshire Capannori (Lucca) 34303 Küçükçekmece - İstanbul
United Kingdom, SO31 4RF Italia Türkiye
Tel: [phone] Telefono: [phone] Tel: [phone]
Fax: [phone] Fax: [phone] Faks: 0212 705 53 93
[email protected] [email protected] [email protected]
www.pce-instruments.com/english www.pce-instruments.com/italiano www.pce-instruments.com/turkish
The Netherlands China Hong Kong
PCE Brookhuis B.V. PCE (Beijing) Technology Co., Limited PCE Instruments HK Ltd.
Institutenweg 15 1519 Room, 6 Building Unit J, 21/F., COS Centre
7521 PH Enschede Zhong Ang Times Plaza 56 Tsun Yip Street
Nederland No. 9 Mentougou Road, Tou Gou District Kwun Tong
Telefoon: [phone] 102300 Beijing, China Kowloon, Hong Kong
[email protected] Tel: [phone] Tel: [phone]
www.pce-instruments.com/dutch [email protected] [email protected]
www.pce-instruments.cn www.pce-instruments.cn
United States of America
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter / Palm Beach
33458 FL
USA
Tel: [phone]
Fax: [phone]
[email protected]
www.pce-instruments.com/us