PCE Instruments PCE-TA 30 User manual

INSTRUCTION MANUAL
CFM Flexible Airflow Meter
PCE-TA 30
•Measures Air flow
•Area Set
•Measures Air
Velocity &
Temperature
•Degrees C/F
switchable
•5 selectable units
of measure
•Data Hold/Max/Min
function
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: [phone]
Fax: [phone]
[email protected]
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: [phone]
Fax: [phone]
[email protected]

2
•Mode Store
1. INTRODUCTION
Congratulations on your purchase of CEM’s
Vane Anemometer. This professional
meter,with proper care, will provide years of
safe reliable service.
2. Features
2.1 Air Velocity and Temperature
measurements displayed on multi-function
2.2 Full 4-digit display of air velocity in
m/s,ft/min,km/h,MPH and knots,
2.3 ºC/ºF Temperature measurement via
built-in thermistor
2.4 Data Hold and Min/Max Rec. functions
2.5 Low battery indication and Auto-Power
off.
2.6 Complete with 9V battery and carrying
case

3
2.7 Current Mode status will be save after
Power off.
3. Specifications
Air Flow
Air Flow Range
Resolution
Area
CFM
0-999,900
ft3/min
0.1
0-999.9ft2
Air Velocity
Units Range Resolution Accuracy
m/s 1.00 －
30.00 0.01 ±3%±0.20 m/s
ft/min 196 －
5900
1 ±3% ±40
ft/min
km/h
3.6 －
108.0
0.1
±3% ±0.8
km/h
MPH
2.2
－
67.0
0.1
±
3%
±
0.4
MPH
Knots 1.9 －
58.0
0.1 ±3% ±0.4
knots
Temperature

4
º
C
-10.0to 60.0
0.1
±
1.5
º
C
º
F
14.0 to 140.0
0.1
±
3.0
º
F
Dimensions: 163 x 45 x 34(mm)
Display size: 26.7 x 25.4(mm)
Fan Diameter:27.2(mm)
Whight: 257(g)
4.Meter Description
1 Vane impeller
2 Precision thermister
3LCD display
4 Power key
5 Hold key / Backlight switch
6 Max and min key / Del Key

5
7 UINTS KEY / ºC / ºF switch
5. OPERATION
5.1 The meter ON OR OFF
Press the button to turn the meter on or
off.
5.2 Non Sleep Mode(BYPASS AUTO
POWER OFF)
The meter will automatically turn off after 15
minutes in the normal. When you turn on the
meter, and press the button UNITS first,an
“disAP0” appears on the LCD,then you can
release the UNITS key and the automatic
power off feature will be disabled.
5.3 Data Hold
Press the HOLD key to freeze the displayed

6
reading. Press again to unlock display.
5.4 Max/Min
Press the MAX/MIN key and the reading will
change from max,min,normal.
Press and hold the MAX/MIN button for about 3
seconds to clear and Stop the MAX/MIN/
recording.
5.5 Measuring m/s,ft/min,km/h,MPH,knots
Press the UINTS key and the reading will
change from m/s,ft/min,km/h,MPH,
KNOTS.
5.6 Select temperature units
℉
OR
℃
.
Turn on the meter first. Press the UINTS
buttons and hold about for 3 seconds to
change temperature units.
5.7 The BACKLIGHT ON and OFF
Press and hold the HOLD key about for 3
seconds to turn on or off the backlight.

7
5.8 AREA SET
1. Turn off the merter.
2. Press the HOLD key and hold.
3. Turn on the meter,then the meter will be
into area set mode and the “set area” show
on the LCD.
4. Press the MAX/MIN key to shift the radix
point.
5. Press the HOLD key to shift the flash
position.
6. Press the UINTS key to adjust digit which
is flash.