PDi PD251-025 User manual

Better Solutions Are Within Reach®
MODEL NUMBER:
PD251-025 Bottom Mount DVD
Bracket for 24” LED TV
Document Number:
PD196-267R4
Installation Instructions
Page 1 of 2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Scope:
To install a bottom mount DVD bracket to a 24” wall mounted LED TV using a PD168-103 wall mount kit
(Not Included).
Tool List:
1. Safety glasses/goggles
2. P1 or P2 Phillips screwdriver
Safety Steps:
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.
Supplied Parts List:
PROCEDURE:
This bracket is a new design. The DVD player must be securely attached to the bracket
before attaching the bracket to the TV assembly or the DVD player will fall.
Step 1:
Slide DVD player (purchased separately) through tabs on DVD mounting bracket PD181-770 (1) as
shown. Secure with PDISEMSM3X55 screw (2).
ITEM
QTY
PART NUMBER
DESCRIPTION
1
1
PD181-770
DVD Mounting Bracket
2
1
PDISEMSM3X55
M3-.5 PPHMS Screw
3
4
PDIPPHMSM4X710
M4X.7X10MM Screws
4
1
PD106-775
15 to 26 pin cable

Better Solutions Are Within Reach®
MODEL NUMBER:
PD251-025 Bottom Mount DVD
Bracket for 24” LED TV
Document Number:
PD196-267R4
Installation Instructions
Page 2 of 2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Step 2:
Remove screws from existing wall mount
bracket and secure right side with two
PDIPPHMSM4X710 screws (3) provided.
Step 3:
Attach DVD/mounting bracket assembly to left
side of existing wall bracket with remaining two
PDIPPHMSM4X710 (3) screws. Securely
tighten all four PDIPPHMSM4X710 screws.
Step 4:
Make connections with cable PD106-775 (4)
from DVD module to television as shown.
Mount TV to wall using installation instructions
for your specific product.