PDi PD251-033 User manual

Better Solutions Are Within Reach®
MODEL NUMBER:
PD251-033 Side Mount
DVD Bracket for 24” ELED TV’S
Document Number:
PD196-305R1
Installation Instructions
Page 1 of 2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Scope:
To install a side mount DVD bracket to a 24” wall mounted LED TV using a PD168-103 wall mount kit
(Not Included). These mounts may be installed to the left or right side of the TV’s
Tool List:
1. Safety glasses/goggles
2. P1 or P2 Phillips screwdriver
Safety Steps:
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.
Supplied Parts List:
PROCEDURE:
The DVD player must be securely attached to the bracket before attaching the bracket to
the TV assembly. The DVD player will fall if not attached to bracket.
Step 1:
Slide DVD player (purchased separately) through tabs on DVD mounting bracket PD181-774 (1) as
shown.Secure with PDISEMSM3X55 (3) screw.
ITEM
QTY
PART NUMBER
DESCRIPTION
1
1
PD181-774
DVD Mounting Bracket
2
4
PDIPPHMSM4X710
M4X.7X10MM Screws
3
1
PDISEMSM3X55
M3-.5 PPHMS Screw
4
1
PD106-775
15 to 26 pin cable

Better Solutions Are Within Reach®
MODEL NUMBER:
PD251-033 Side Mount
DVD Bracket for 24” ELED TV’S
Document Number:
PD196-305R1
Installation Instructions
Page 2 of 2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Step 2:
Place mounting bracket PD181-596 (not included) to TV
and secure with two PDIPPHMSM4X710 screws (2).
(Replacing screws included in PD168-103 kit)
*Note: This process can be repeated in reverse order
left side for right side mounting.
Step 3:
Place bracket assembly to left side of PD181-596 bracket and secure with remaining two
PDIPPHMSM4X710 screws (2).
Step 4:
Make connections with cable PD106-775 (4) from DVD module to television as shown.
Mount TV to wall using installation instructions for your specific product.