
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
A Leader in Patient Communication
Solutions®
PD251-034 Side Mount DVD Bracket
for 29” and 32” ELED TV’s
PD196-306R7
Installation Instructions
Scope:
To install a side mount DVD bracket to a 29” or 32” (plastic and metal) wall mounted LED TV using a
PD168-051 wall mount kit (Not Included) or a table mounted LED TV. These mounts may be installed to
the left or right side of the TV’s.
Tool List:
1. Safety glasses/goggles
2. P1 or P2 Phillips screwdriver
Safety Steps:
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.
Supplied Parts List:
M5-0.8 x 10mm PPHMS screw
M6-1.0 x 10mm PPHMS screw
PROCEDURE:
The DVD player must be securely attached to the bracket before attaching the bracket to
the TV assembly. The DVD player will fall if not attached to the bracket.
Do not hot swap – Set should be unplugged when connecting DVD cable.
Step 1 Wall and Table Mount:
Slide DVD player (purchased separately) through tabs on DVD mounting bracket PD181-774 (1) as
shown. Secure with PDISEMSM3X55 screw (3).