Peak Performance PKC0J5 User manual

TM
12-volt 2-in-1
Heater / Defroster
Model No.: PKC0J5
Owner’s Manual
and Warranty Information
Read these instructions completely before using this product.
Retain this Owner’s Manual for future reference.
3/11
1

2
CONTENTS
SAFETY PRECAUTIONS ................................................................................................................ 2
General Safety Messages ....................................................................................................... 2
INTRODUCTION .............................................................................................................................4
FEATURES ...................................................................................................................................... 4
POWER CONNECTION ..................................................................................................................5
OPERATION ....................................................................................................................................5
MOUNT INSTALLATION..................................................................................................................6
Mount Installation Precautions ................................................................................................6
Semi-Permanent Installation ................................................................................................... 6
Permanent Installation............................................................................................................. 6
CARE AND MAINTENANCE ...........................................................................................................7
Fuse Replacement ..................................................................................................................7
Recycling / Disposal................................................................................................................7
SPECIFICATIONS ........................................................................................................................... 7
LIMITED WARRANTY .....................................................................................................................8
To Obtain Service.................................................................................................................... 8
SAFETY PRECAUTIONS
This safety alert symbol indicates that a potential personal injury hazard is present. The symbol
is usually used with a signal word (e.g., WARNING) which designates the degree or level of hazard
seriousness.
The signal word WARNING indicates a hazardous situation which, if not avoided, could result in death
or serious injury.
The signal word NOTICE indicates a situation which can cause damage to the product, other personal
property and/or to the environment, or cause the product to operate improperly.
The combination of the safety alert symbol and signal word is used in safety messages throughout this
manual.
All safety messages that follow have WARNING level hazards. Failure to
comply could result in death or serious injury.
General Safety Messages
• Do not allow children to operate this Heater/Defroster.
• This Heater/Defroster is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a person responsible for their
safety.
• Before each use, unwind the power cord to minimize the amount of heat that is generated by the
power cord. A wound-up cord will cause the cord to become hotter than an unwound cord.
• This product is not recommended for use in your vehicle if the vehicle’s heating system has
malfunctioned. The cause of the vehicle’s heating system malfunction may also cause the
Heater/Defroster to malfunction.
• Keep the 12-volt DC adapter power cord away from the vehicle’s controls.
• Do not use this Heater/Defroster for other purposes than its intended use.
Electric Shock Hazards
• Never connect a damaged Heater/Defroster to a power supply.
• Only connect the Heater/Defroster to an approved 12-volt cigarette lighter/accessory socket rated at
15 amps or higher. Do not connect to a 6-volt or 24-volt power source.
• This product is not recommended for use in your vehicle if your vehicle’s charging system is not
working correctly. An irregular voltage output may cause excessive current draw, and could exceed
15 amps.
• Never operate the Heater/Defroster if any part of the Heater/Defroster is corroded or damaged.
• Never operate the Heater/Defroster around water or areas of high moisture.
• Never submerge the Heater/Defroster in water or any liquid.

3
Fire / Explosion Hazards
• NeveroperatetheHeater/Defrosternearammablematerialsorammablegases,vaporsorfumes.
• Insert the 12-volt DC adapter power plug as far into the 12-volt DC cigarette lighter/accessory
socket as possible. Twist the plug slightly to ensure good contact is made. Poor contact may damage
the 12-volt DC adapter power plug and/or the Heater/Defroster, and result in poor performance and
possiblyare.
• NeverallowtheHeater/Defrostertobeexposedtore,directameorhigh-heatsources.
• Never block the Heater/Defroster air inlet vent/fan or heat outlet vent.
• Always operate the Heater/Defroster in a well-ventilated area.
• Never place objects or materials in the Heater/Defroster air inlet vent/fan or heat outlet vent.
• Never operate the Heater/Defroster while unattended.
• Secure the Heater/Defroster in a solid manner before operating in a permanent mount manner.
• Never allow the 12-volt DC adapter power cord to come near the heat outlet vent.
Burn Hazards
• Never touch the Heater/Defroster vents when the Heater/Defroster is operating.
• Do not place any body part or any materials near or directly in front of the Heater/Defroster heat
outlet vent when the Heater/Defroster is operating.
All safety messages that follow have NOTICE level hazards. Failure to comply
could result in personal property damage.
• AlwaysturntheHeater/Defrosteroanddisconnectthe12-voltDCadapterpowerplugfromthe
power supply when not in use.
• Do not disassemble the Heater/Defroster or remove any parts. This Heater/Defroster contains no
serviceable or replaceable parts.
• Clean the Heater/Defroster regularly (see page 7 for care instructions).

4
INTRODUCTION
Read and understand this Instruction Manual and your vehicle Owner’s Manual (when applicable)
before using the Heater/Defroster. Operate the Heater/Defroster only as described in this Instruction
Manual.
FEATURES
1
3
24
5
67
8
9
10
11
13
12
14
Legend
1. Heat Outlet Vent
2. Air Inlet Vent/Fan
3. Foldable Handle
4. Handle Ring
5. HEAT/OFF/FAN Switch
6. Detachable Swivel Base
7. 15-Amp In-Line Blade-Type Fuse
8. 12-volt DC Adapter Power Cord
9. Green Power Indicator LED
10. 12-volt DC Adapter Power Plug
11. Adjustable Ball Swivel
12. Red Heat ON Indicator Light
13. Velcro Tape
14. Mounting Screws (2)

5
POWER CONNECTION
The 12-volt DC adapter allows the use of a 12-volt cigarette lighter/accessory socket to power the
Heater/Defroster.
• The 12-volt DC adapter power cord contains an in-line 15-amp blade-type fuse to prevent damage
from excessive current while operating.
• A green power indicator LED is provided on the 12-volt DC adapter power plug.
- The Heater/Defroster power supply is connected when the green power indicator LED is
illuminated.
- If the green power indicator LED does not illuminate, make sure the power source is live, check
the in-line 15-amp fuse and make sure all connections are secure.
Only use the 12-volt DC adapter that is provided with this Heater/Defroster. Use of
other adapters may void any warranty, cause Heater/Defroster damage, increase risk of re
and/or result in personal injury.
Do not submerge the 12-volt DC adapter in water or any liquid. Keep it dry and free
of dirt/dust at all times.
Never connect the 12-volt DC adapter to an unprotected DC power supply.
Be sure the 12-volt DC cigarette lighter/accessory socket and 12-volt DC adapter
power plug are clean before connecting. Corrosion and poor electrical contact may damage
the 12-volt DC adapter or Heater/Defroster and result in poor performance or even re.
When disconnecting from power, always pull the 12-volt DC adapter power plug;
never pull using the 12-volt DC adapter power cord.
OPERATION
1. Position the Heater/Defroster HEAT/OFF/FAN switch in the OFF (center) position.
2. If using the portable heater function, pull the handle ring to extend the handle fully from the Heater/
Defroster housing.
Hold the Heater/Defroster rmly while operating.
3. Connect the 12-volt DC adapter power plug to a 12-volt DC cigarette lighter/accessory socket,
twisting it to make a good connection.The green power indicator LED will illuminate, indicating the
Heater/Defroster is connected to a power supply.
4. Position the Heater/Defroster HEAT/OFF/FAN switch to the desired HEAT or FAN position.
a. FAN(airowonly)–Operatesthefanonly.
b. HEAT(hotairow)–Operatestheheaterandfan.TheredheatONindicatorlightwillbelit.

6
MOUNT INSTALLATION
The Heater/Defroster may be mounted to any solid surface, such as a vehicle dashboard or console,
using the Velcro tape or the provided mounting screws.
Mount Installation Precautions
• NevermounttheHeater/Defrosternearammablematerials.
• NevermounttheHeater/Defrosterwhereitmaybeexposedtore,directameorhigh-heat
sources.
• Never mount the Heater/Defroster where the air inlet vent/fan or heat outlet vent may be blocked.
• Always mount the Heater/Defroster in a well-ventilated area.
• Ensurethemountingsurfaceissolidandat.
Semi-Permanent Installation
1. Slide and remove the swivel base from the Heater/Defroster.
2. Clean the Heater/Defroster swivel base, removing any dirt, oil or grease.
3. Clean the mounting surface area in the same manner.
4. Separate the Velcro tape and remove the tape backing.
5. Firmly apply one half of the Velcro tape to bottom of the Heater/Defroster swivel base.
6. Firmly apply the other half of the Velcro tape to the desired mounting surface.
7. PositiontheHeater/Defrosterswivelbaseinthedesiredpositionandpressrmlytosecurein
place.
8. Attach the Heater/Defroster to the swivel base and position as desired using the ball swivel.
9. Route and secure the 12-volt DC adapter power cord away from any vehicle controls.
Permanent Installation
1. Slide and remove the swivel base from the Heater/Defroster.
2. Using the two provided screws, mount the Heater/Defroster swivel base in the desired location. If
pilot holes are required:
a. Using the swivel base screw holes as a template, mark the positions of the screw holes on the
desired mounting surface.
b. Drill pilot holes with appropriate size drill.
3. Attach the Heater/Defroster to the swivel base and position as desired using the ball swivel.
4. Route and secure the 12-volt DC adapter power cord away from any vehicle controls.

7
CARE AND MAINTENANCE
FIRE HAZARD
Do not use combustible cleaners to clean the Heater/Defroster.
ELECTRIC SHOCK HAZARD
Always disconnect the Heater/Defroster from its power source before cleaning.
BURN HAZARD
Allow the Heater/Defroster to cool completely before cleaning.
• Unplug the Heater/Defroster 12-volt DC adapter power plug from the power supply and allow the
Heater/Defroster to cool before attempting to clean.
• Only use a soft cloth moistened with a mild solution of water and detergent on the outer surface of
the Heater/Defroster when cleaning. Dry thoroughly with a clean cloth. Do not allow excess water or
liquids to enter the Heater/Defroster housing.
Fuse Replacement
1. Disconnect the 12-volt DC power adapter from the 12-volt DC power supply.
2. Replace the in-line fuse with equivalent 15-amp blade-type fuse.
Recycling / Disposal
This device contains materials that must be disposed of properly when the device
is discarded. Contact your local government recycling authority for proper disposal methods.
This Heater/Defroster is designed to provide years of service. However, at the end of its
useable life, please DO NOT discard into residential or commercial trash. Materials used
in this product must be recycled or safely disposed of at a recycling center. Contact your
local, county or municipal recycling center for additional information.
SPECIFICATIONS
1. Power Source 12 volts DC at 15A or higher
2. Current Draw 13A
3. Fuse 15A
4. Maximum Heater Temperature 199°F (93°C) measured at air exhaust vent
5. Length of Power Cord 78.7 in. (2 m)

8
LIMITED WARRANTY
Manufacturer warrants to the original consumer, or purchaser, that the PEAK™ PKC0J5 12-volt 2-in-1
Heater/Defroster will be free from defects in material and workmanship for ninety (90) days from the
date of sale to the original purchaser. Manufacturer hereby excludes and disclaims any and all other
warranties,expressedorimplied,beyondthosewarrantiesspeciedabove.Manufacturerexcludesany
impliedwarrantyofmerchantabilityortnessforaparticularpurpose.
IF YOUR PEAK™ HEATER/DEFROSTER MALFUNCTIONS DUE TO A DEFECT IN MATERIALS
AND WORKMANSHIP WITHIN THE NINETY (90) DAY WARRANTY PERIOD, MANUFACTURER
WILL, AT ITS ELECTION REPAIR OR REPLACE IT. MANUFACTURER SHALL NOT, HOWEVER,
BE RESPONSIBLE FOR ANY DAMAGE TO YOUR PRODUCT DUE TO ANY CAUSE OTHER THAN
DEFECTS IN MATERIAL OR WORKMANSHIP, INCLUDING WITHOUT LIMITATION: FAILURE
TO FOLLOW INSTRUCTIONS FOR USE; MISUSE; REPAIRS BY AN UNAUTHORIZED PERSON;
MISHANDLING; MODIFICATIONS; NORMAL WEAR AND TEAR; ACCIDENT OR OVERLOAD.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. MANUFACTURER SHALL NOT BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR PUNITIVE DAMAGES FOR BREACH OF ANY EXPRESSED OR IMPLIED
WARRANTY ON THIS PRODUCT OR BASED ON ANY OTHER CAUSE OR CLAIM.
To Obtain Service:
1. Before returning this product for any reason, please call toll free [phone].
2. Do not return your PEAK™ product to the place of purchase for service. Send your unit, postage
prepaid and insured, along with a copy of the original sales receipt and a phone number to the
address below. Pack your unit properly, as we are not responsible for any damage caused during
shipping.
Old World Industries, Inc.
c/o Technical Services
4065 Commercial Avenue
Northbrook, IL 60062
3. A copy of the original receipt is required for warranty service. If no receipt is provided, the unit
manufacturer’s date will be used as the date of purchase.
TM
© 2011 Old World Industries, Inc., Northbrook, IL 60062
MADE IN CHINA
www.peakauto.com