Peak Peak 632A User manual

PEAK 632A
Single Board Computer
User′
′′′s Manual
All brand names are registered trademarks of their respective owners.

Copyright 2000
All rights reserved
Edition 1.0 July, 2000
The information in this document is subject to change without prior notice in order to improve
reliability, design and function. The information in this document does not represent
commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use of the PEAK 632A, nor for any infringementsupon
the rights of third parties which may result from such use.
This document contains proprietary information protected by copyright. All rights are reserved.
No part of this manual may be reproduced by any mechanical, electronic, or other means in any
form without prior written permission of the manufacturer.
Trademarks
PEAK 632A is a registered trademark of NEXCOM International Co., Ltd.
IBM PC is a registered trademark of International Business Machines Corporation.
Intel and Pentium are registered trademarks of Intel Corporation. Award is a registered
trademark of Award Software, Inc.
Other product names mentioned herein are used for identification purposes only and may be
trademarks and/or registered trademarks of their respective companies.

Table of Contents
How to Use This Guide
Chapter 1 Introduction
1.1 Introduction...........................................................................-1
1.2 Features……..  ….1-1
1.3 Specifications  .1-2
1.4 Packing List .. 1-6
Chapter 2 Switches and Connectors
2.1 Switches................................................................................2-1
2.2 Connectors...................................................................................2-4
Chapter 3 System Memory and CPU Installation
3.1 System Memory.......................................................................3-1
3.2 Cache Memory ........................................................................3-3
3.3 Chang CPU.................................................................. 3-
Chapter 4 Award BIOS Setup
4.1 Entering Setup.........................................................................4-1
4.2 Control Keys ..................... ........................................... 4-2
4.3 Getting Help ............................…................................................ 4-3
4.4 The Main Menu ........................................................................... 4-4
4.5 Standard CMOS Setup ............................................................ 4-7
4.6 BIOS Features Setup. ..................…...........................................-11
4.7 Chipset Features Setup............................................................…4-16
4.8 Power Management Setup...........................................................4-20
4.9 PnP/PCI Configuration..........................................................….4-25

4.10 IDE HDD Auto Detection ......................................................... 4-31
4.11 Supervisor/User Password Setting.............................….......4-35
4.12 IDE HDD Auto Detection ........................................4-36
4.13Power-On Boot …... .......................-41
4.14 BIOS Reference – POST messages 4-42
4.15 BIOS Default Drive Table….….….….4-48
Chapter 5 VGA Driver Installation Procedures
5.1 Windows 95/98 Drivers Setup Procedure… …..5-1
5.2 Windows NT Drivers Setup Procedure .. 5-12
Chapter 6 LAN Driver Installation Procedures
6.1 Windows 95/98 Drivers Setup Procedure ..…6-1
6.2 Windows NT Drivers Setup Procedure ...….… 6-6
Chapter 7 SCSI Driver Installation Procedures
6.1 Windows 95/98 Drivers Setup Procedure ..…6-1
6.2 Windows NT Drivers Setup Procedure ...7-11
Appendix A Watchdog Timer
Appendix B Memory Mapping

How to use this manual
This manual is written to help you use the PCA-6551VE. It describes how to make various
settingsonthePentium®CPUboard to meet your requirements. A brief summary of the manual
follows:
Chapter 1 “Introduction
gives an overview of the product specifications. It also tells you
what is included in the product package.
Chapter 2 umpers and Connectors
describes the definitions and positions of jumpers and
connectors that you may easily configure and set up according to your particular requirements.
Chapter 3 ystemExpansion
describes how tochange or expand the CPU board by changing
the systemmemory, cache memory, and/or CPU. These changes will yield more power from the
CPU board.
Chapter 4 ward BIOS Setup
describes howto use the advanced PCI/Green BIOS to control
almost every feature of the PCA-6551VE, including the watchdog timer.
Chapter 5 “VGA DriverInstallation Procedures” gives instructionsforinstallingand operating
the software drivers on the utility disk included in your package.
Chapter 6 “LAN Driver Installation Procedures” provides detailed information on Ethernet
configuration, and shows how to change the configuration to match your application
requirements.
Chapter 7 “SCSI Driver Installation Procedures” provides detailed information for installing
and operating the software drivers, and shows how to change the configuration to match your
applicationrequirements.
Appendix A “Watchdog Timer” describes how to set up the watchdog timer (WDT), and gives
an example of programming the WDT.
Appendix B “Memory Mapping” describes usage of the 1st MB memory.

Peak 632A User's Guide
Specifications 1-1
Chapter 1
1-1 Introduction
The PEAK 632A is a full size Single Board Computer. It applies Single Socket 370
FC-PGA based processor, supporting both 66 MHz (Celeron) and 100 MHz (Pentium
III) Front Side Bus. The memory it can accommodate is 1 GB SDRAM up to 100
MHz.
Meanwhile, this card is on-board with the following three significant I/Os which help
to spare out more PCI slots for other add-on I/Os, i.e. the C&T 69000/69030
VGA/Panel controller through AGP interface; the Intel 82559 Ethernet and the
Adaptec 7890 Ultra 2 SCSI. Components with all of the above branded and
powerful. PEAK 632A is obviously a formidable platform ideal for heavy duty and
computer telephony application.
The other on-board I/Os includes 2S1P, the high precision RTC with battery, the
Watch Dog Timer, DOC, IDE ×2, FDC ×1, USB ×2, and PS/2 Keyboard/Mouse.
1-2 Features
!Intel Celeron/Pentium III CPU with 66/100MHz FSB up to 850 MHz
!1 GB SDRAM (Max.) memory support, DIMM ×4
!Intel 440BX AGP set
!C&T 69000 AGP mode VGA controller with CRT/LCD support
!Intel 82559 10/100 Base Ethernet controller
!Adaptec 7890 U2 SCSI controller
!On board socket for DiskOnChip up to 288MB
!RS232 ×2 with 16C550 UARTs, optionalRS422/485 ×1
!Enhanced parallel port, support SPP/EPP/ECP
!IDE ×2, FDC ×1, PS/2 keyboard/mouse
!USB port ×2
!Watchdog Timer
!ISAMAX support up to 20 slots ISA card

Peak 632A User's Guide
Specifications 1-2
1-3 Specifications
!System Architecture
!Full size SBC with PCI/ISA Golden finger
!Intel Socket 370 Celeron/Pentium III with 66/100MHz FSB
!PCI V2.1 complied
!PICMG 1.0 (Rev.2.0) complied
!CPU Support
!Intel Celeron/Pentium III CPU with 128/256K cache on die
!Brand New Socket 370 FC-PGA CPU running at 66/100MHz FSB up to 850MHz
!Support streaming SIMD instruction
!Main Memory
!Support SDRAM up to 1GB (Max.)
!168 pin DIMM socket ×4
!ECC support (single bit error correction/Multiple bit errors reporting)
!BIOS
!Award System BIOS
!Plug & Play support
!Advanced Power Management support
!Advanced configuration & Power Interface support
!2M bit flash ROM
!Chip Set
!Intel 82440BX AGP set
!66/100MHz FSB support
!PCI V2.1 complied
!Optimized SDRAM support
!On Board VGA
!C&T 69000 AGP mode VGA controller
!TFT LCD/DSTN LCD/CRT control

Peak 632A User's Guide
Specifications 1-3
!2MB SDRAM on die
Maximum Res.
Color & Refresh
Rate
Resolution
Colors Refresh Rate (Hz)
1280×1024 256 60
1024×768 16bits (High color) 85, 75, 65
800×600 24bits (True color) 85, 75, 65
!Driver supportWindows 95/98, Windows NT4.0
!15 pin CRT connector ×1, 50 pin LCD panel connector ×1
!On Board LAN
!Intel 82559 Single Ethernet controller
!10 Base T/100 Base TX support, full duplex
!Complied with PCI V2.1, IEEE802.3, IEEE 802.3U
!Backward compatible with former 82558 Ethernet controller base net modules
!Driver support: DOS/Windows, Windows 95/98, Windows NT4.0, Netware, SCO
Open Server 5.0
!RJ45 connector ×1
!On Board SCSI
!Adaptec AIC 7890 RISC SCSI controller
!Brand New Ultra 2 SCSI support
!80MB/s (Max.) transfer rate, up to 12 meter cable
!Backward compatible with Ultra Wide SCSI, SCSI II, etc.
!Driver support: Windows 95/98, Windows NT4.0, SCO Open Server 5.0
!68 pin SCSI connector ×1
!On Board I/O
!Winbond W83977 Super I/O on board
!SIO ×2, with 2×16C550 UARTs, 9 pin D-type ×1, 10 pin HEADER ×1, optional
RS422/485 ×1
!PIO ×1, Bi-directional, EPP/ECP support, 26 pin ×1
!Floppy Disk controller: 5.25″360K/1.2MB, 3.5″

Peak 632A User's Guide
Specifications 1-4
720K/1.2MB/1.44MB/2.88MB support, 34 pin connector ×1
!On chip enhanced IDE ×2, PIO up to mode 4, DMA master up to mode 2,
Ultra DMA/33 support, 40 pin ×2, total 4 E.IDE Devices support
!On chip keyboard, mouse controller, PS/2 KeyboardMouse, 5 pin header
×1, 6 pin mini DIN ×2, (for Peak632V/Peak632)PS/2 Keyboard, 6 pin
mini DIN ×1, share with PS/2 mouse by Y cable
(for Peak632A/Peak632VL)
!On board USB port ×2 (6 pin header ×1)
!On board buzzer ×1
!On board 2 pin header for reset SW, 4 pin for speaker, 5 pin for keylock
!On board 3 pin header for +5VSTBY, GND, Power ON#
!On board 2 pin header for I2C
!On board reserved CAN Bus connector
!On Board RTC
"High precision real time clock/calendar with battery back up
!On Board Solid State Disk Socket
!On board reserved socket for DOC of M-systems2MB~144MB, etc
!System Monitor
!Winbond W83782D system monitor controller
!Six voltage (For +3.3V, +5V, +12V, −12V, Vtt and Vcore )
!One Fan speed (For CPU)
!Two temperature
!Drivers support: Windows 95/98, Windows NT4.0
!ISAMAX Support
!Maximize ISA signals to support ISA cards up to 20
!WatchdogTimer
!1,2,44 seconds time-out intervals
!Dimensions
!340mm(D) ×122mm(W)
!Power Requirements
!+5V20A (Max.)

Peak 632A User's Guide
Specifications 1-5
!+12V: 500mA (Max.)
!-12V: 50mA (Max.)
!Environments
!Operating temperatures0°C to 60°C
!Storage temperatures-20°C to 80°C
!Relative humidity10% to 90% (Non-condensing)
!Certification
!CE approval
!FCC Class A
!Model Available
!PEAK 632A--Full-size Socket 370 Celeron/Pentium III AIO CPU Card
!PEAK 632VL-- Full-size Socket 370 Celeron/Pentium III CPU Card
w/VGA/LAN
!PEAK 632V-- Full-size Socket 370 Celeron/Pentium III CPU Card w/
VGA
!PEAK 632-- Full-size Socket 370 Celeron/Pentium III CPU Card

Peak 632A User's Guide
Specifications 1-6
1-4 What you'll have from the package
In addition to this manual, the PEAK 632A series package includes the following items.
ITEM
Model Peak 632A Peak 632VL Peak 632V Peak 632
Peak 632A series
CPU card 1111
IDE cable 1 1 1 1
FDC cable 1 1 1 1
Serial & Printer port
cable 1111
5 pin to 5 pin
keyboard cable 1111
Y cable for
keyboard & mouse 11××
UW SCSI cable 1 ×××
C&T 69000 VGA
driver disks 111×
Intel82559
Ethernet driver
disks 22××
Adaptec7890
driver disks 3×××
WinbondW83782D
driver disks 3333
If any of these items is missed or damaged, please contact your vendor for what you
want.

Chapter 2
Figure 2-1 Switches and Connectors position

Peak 632A User's Guide
Switches and Connectors 2-1
This chapter gives the definitions and shows where to locate the positions of
switches and connectors.
2-1 Switches
Switches on the CPU board are used to select options for different functions used.
The switch-on or off is to accommodate the variations of the following table.
Switch Setting Table (*: default setup)
AT/ATX FUNCTION SELECT
*AT Function ATX Function
JP4 1-2,3-4 5-6,7-8
JP7 N/C 1-2
JP8 1-2 3-4
CPU Frequency
S1.1 S1.2 S1.3 S1.4 S1.5 S1.6 S1.7
*100 OFF OFF ON OFF OFF OFF OFF
66 ON ON ON OFF OFF ON OFF
CPU Pipelined S1.8
*Enabled OFF
Disabled ON
DEVICE SELECT S2.1 S2.2 S2.3 S2.4 S2.5 S2.6
*VGA Enabled ON OFF X X X X
VGA Disabled OFF ON X X X X
*SCSI Enabled X X ON OFF X X
SCSI Disabled X X OFF ON X X
*LAN Enabled X X X X ON OFF
LAN Disabled X X X X OFF ON

Peak 632A User's Guide
Switches and Connectors 2-2
M-System Disk On Chip
S4.1 S4.2 S4.3
Disabled OFF X X
C0000 ON ON ON
C8000 ON ON OFF
D0000 ON OFF ON
*D8000 ON OFF OFF
BIOS Fresh S4.4
Enabled ON
*Disabled OFF
IRQ12 (Mouse Controller) Release
S4.6
*Enabled ON
Disabled OFF
RTC Clear S4.5
Enabled ON
*Disabled OFF
COM2 RS232 /RS485/RS422
S7.1 S7.2 S7.3 S7.4 S7.5 S7.6 S7.7 S7.8 S3.1 S3.2 S3.3
*RS232 OFF ON OFF ON OFF ON OFF ON ON OFF OFF
RS485 ON OFF ON OFF ON OFF ON OFF OFF OFF ON
RS422 ON OFF ON OFF ON OFF ON OFF OFF ON OFF
S6.1 S6.2 S6.3 S6.4 S6.5 S6.6 S6.7 S6.8 S3.4 S3.5
*RS232 OFF ON OFF ON OFF ON OFF ON OFF ON
RS485 ON OFF ON OFF ON OFF ON OFF OFF OFF
RS422 ON OFF ON OFF ON OFF ON OFF ON OFF

Peak 632A User's Guide
Switches and Connectors 2-3
PANEL DIRECTOR
SW2.4 SW2.3 SW2.2 SW2.1
On On On On 1024x768 Dual Scan STN Color Panel
On On On Off 1280x1024 TFT Color Panel
On On Off On 1024x768 Dual Scan STN Color Panel:
On On Off Off 1024x768 Dual Scan STN Color Panel
On Off On On 640x480 Sharp TFT Color Panel
On Off On Off 640x480 18Bit TFT Color Panel
On Off Off On 1024x760 TFT Color Panel
On Off Off Off 800x600 TFT Color Panel
Off On On On 800x600 TFT Color Panel
Off On On Off 800x600 TFT Color Panel
*Off On Off On 800x600 Dual Scan STN Color Panel
Off On Off Off 800x600 Dual Scan STN Color Panel
Off Off On On 1024x768 TFT Color Panel
Off Off On Off 1280x1024 Dual Scan STN Color Panel
Off Off Off ON 1024x600 Dual Scan STN Color Panel
Off Off Off Off 1024x600 TFT Color Panel
PANEL DIRECTOR SW1.1 SW1.2 SW1.3 SW1.4
*MPCLK From PCLK ON OFF X X
MPCLK From M OFF ON X X
*DE From M X X ON OFF
DE From LP X X OFF ON
FLASH ROM SIZE
S5.1 S5.2
1M ON OFF
*2M OFF ON

Peak 632A User's Guide
Switches and Connectors 2-4
2-2 Connectors
Jumper/Connector define
Connector Function Remark
J1 CPU Fan Header
J2, J3, J4, J5 DIMM Socket
J7 HDD Connector
J8 Panel Connector
J9 ATX Power Connector
J10 HDD Connector
J11 SCSI Connector
J12 Speaker Connector
J13 FDD Connector
J14 COM2
J15 Reset Connector
J16 Parallel Connector
J17 USB Connector
J18 LAN, RJ45 Connector
J19 CRT Connector
J20 MOUSE Connector
J21 COM1
J22 KB/MS Connector
JP1, JP2, JP3 Temperature Connector
JP5 Panel Voltage Connector
JP6 SMBUS Connector
JP9 ATX Power Button
JP10 NEXCOM ISA Connector
JP11 IR Connector
JP12 Key Lock
JP13 LAN Link LED
JP14 LAN Speed LED
JP15 LAN Active LED
JP16 HDD LED
JP17 SCSI LED
JP19 Keyboard Connector
JP20 LAN Connector
U21 M-SYSTEM DOC

Peak 632A User's Guide
Switches and Connectors 2-5
Pin definitions of connectors
•
••
•J1: CPU Fan Header Connector
PIN No. Description
1GND
2 +12V
3Sense
•J7 /J10: HDD Connector
PIN No. Description PIN No. Description
1 Reset# 2 Ground
3 Data 7 4 Data 8
5 Data 6 6 Data 9
7 Data 5 8 Data 10
9 Data 4 10 Data 11
11 Data 3 12 Data 12
13 Data 2 14 Data 13
15 Data 1 16 Data 14
17 Data 0 18 Data 15
19 Ground 20 N/C
21 DMA REQ 22 Ground
23 IOW# 24 Ground
25 IOR# 26 Ground
27 IOCHRDY 28 Ground
29 DMA ACK 30 Ground
31 Interrupt 32 NC
33 SA1 34 N/C
35 SA0 36 SA2
37 HDC CS1# 38 HDC CS3#
39 HDD Active# 40 Ground

Peak 632A User's Guide
Switches and Connectors 2-6
•
••
•J8: Flat Panel Connector
PIN No. Description PIN No. Description
1ENABLK 2+12VSAFE
3LP 4DE
5SHFCLK 6FLM
7P0 8VDD
9P2 10P1
11 P4 12 P3
13 P6 14 P5
15 P8 16 P7
17 P10 18 P9
19 P12 20 VDD
21 P14 22 P11
23 GND 24 P13
 P16  P15
 P18  P17
29 P20 30 ENAVEE
31 P22 32 P19
 GND  P21
 P24  P23
37 P26 38 P25
39 M/PCLK 40 GND
41 P28 42 P27
43 P30 44 P29
45 P32 46 P31
47 P34 48 P33
49 GND 50 P35

Peak 632A User's Guide
Switches and Connectors 2-7
•J9: ATX Power Connector
PIN No. Description
15VSB
2GND
3PowerOn
•
••
•J12: Speaker Connector
PIN No. Description
1 Speaker Signal
2GND
3GND
4+5V
•J13: FDC Connector
PIN No. Description PIN No. Description
1 Ground 2 Density Select
3 Ground 4 N/C
5N/C 6Drate0
7 Ground 8 Index#
9 Ground 10 Motor Enable A#
11 Ground 12 Drive Select B#
13 Ground 14 Drive Select A#
15 Ground 16 Motor Enable B#
17 Ground 18 Direction#
19 Ground 20 Step#
21 Ground 22 Write Data#
23 Ground 24 Write Gate#
25 Ground 26 Track 0#
27 Ground 28 Write Protect#
29 GPI21 30 Read Data#
31 Ground 32 Head Side Select#
33 Ground 34 Disk Change#

Peak 632A User's Guide
Switches and Connectors 2-8
•J14/J21: Serial Port Connector (D-Sub 9 -pin)
PIN No. Description
1 Data Carrier Detect (DCD)
2 Receive Data (RXD)
3 Transmit Data (TXD)
4 Data Terminal Ready (DTR)
5 Ground (GND)
6 Data Set Ready (DSR)
7 Request to Send (RTS)
8 Clear to Send (CTS)
9 Ring Indicator (RI)
•
••
•J15: Reset Connector
PIN No. Description
1 RESET
2GND
•J16: Parallel Port Connector
PIN No. Description PIN No. Description
1 Strobe# 2 Data 0
3 Data 1 4 Data 2
5 Data 3 6 Data 4
7 Data 5 8 Data 6
9 Data 7 10 Acknowledge
11 Busy 12 Paper Empty
13 Printer Select 14 Auto Form Feed#
15 Error# 16 Initialize
17 Printer Select IN# 18 Ground
19 Ground 20 Ground
21 Ground 22 Ground
23 Ground 24 Ground
25 Ground 26 N/C