Peavey ID 1G User manual

The Peavey ID™1G, or Instrument Direct Interface is a basic, non-equalized, direct interface designed to be inserted in the
ream lifier out ut/ ower am lifier in ut of any instrument am lifier. Although the ID 1G may be used directly off of the
instrument out ut (electric bass/guitar), some signal loss and high-frequency attenuation will occur. The ID 1G will rovide a
transformer balanced send ( in 2 ositive) suitable for direct in ut to any low-im edance mixer in ut.
OOeerraattiioonn NNoottee::Placing the ground switch in the “ground lift” osition will result in ground isolation between the line out and
balanced out (XLR).
SSPPEECCIIFFIICCAATTIIOONNSS IIDD™™11GG
HHeeiigghhtt::
1.5" lus connectors
WWiiddtthh::
3.0"
DDeetthh::
4.4"
WWeeiigghhtt::
0.45 lbs. (0.2 kg)
FFrreeqquueennccyy RReessoonnssee::
20 Hz to 20 kHz (+ - 0.5 dB)
MMaaxxiimmuumm IInnuutt LLeevveell::
+10 dBu
OOvveerraallll GGaaiinn::
-20 dB
SSPPEECCIIFFIICCAATTIIOONNSS
Features and s ecifications subject to change without notice.
Peavey Electronics Cor oration • 711 A Street • Meridian • MS • 39301 [phone] • FAX [phone] • www. eavey.com
©2003 Printed in the U.S.A. 8/03
80303108