pedestal Moon Rollin User manual

Assembly
Guide
Moon Rollin’

Congrats on your new Pedeal produ, and welcome to the
world of Pedeal. You have entered a colorful world of design
items made for you to elevate your interior design.
Deeply rooted in the Scandinavian design tradition, our
produs refle our commitment to quality, funionality
and simplicity.
Let’s go on a more colorful journey together - where form
follows funion playfully!
/Pedeal
Moon Rollin’
Use the QR code or type in the URL to access our guides.
www.pedeal.com/pages/manuals

Tools
1: Wrench (Provided in the hardware bag)
2: Hex key (Provided in the hardware bag)
3: Table
4: So cloth or blanket
5: Assiing friend
You will need the tools listed below:
2
3
4
1
1.0 Mount brackets
Parts
Task
8x M8x50mm bolts
8x M8 Nuts
Mount the brackets horizontally onto both sides as shown.
Tighten all conneions.

1.1 Mount brackets detail
Task
Detailed view of ep 2.0.
2.0 Wheels
Parts
Task
4×Wheels
Mount the four wheels into the boom of the feet as shown.
One wheel on each foot.
Tighten all conneions.

Pipe
Scan the QR-code to find the Manual for Pipe Shelf
Do you have a Pipe shelf you
want on your Moon Rollin’?
Yes? Now is the time!
No? Skip to the next page.
Wait a
second!

3.1 TV brackets ing
Correct t
Incorrect t
Do not panic!
You will not need all of the remaining hardware.
The large seleion of remaining hardware is to
accommodate as many dierent screens as possible.
For a corre fit you will have to identify the right combination
of provided acers, washers and bolts.
Place the acers between the screen and the brackets
to ensure that the brackets do not touch the screen.
If for inance your screen has a curved backside, you might
have to use more than one layer of acers.
Now screw the appropriately dimensioned bolts with washers
through the brackets and acers into the threaded holes on
the backside of the screen. Tighten the bolts until you have a
snug fit. Be sure not to overtighten. The bolts mu not reach
the boom of the threaded holes. Overtightening might cause
damage to your screen.
1 2
3.0 Mount TV brackets
Parts
Task
Place your screen facing backside up on a tabletop with
a so cloth or blanket between the two in order to prote both.
Mount the TV brackets vertically using the fiing holes.
For corre fit, see ep 3.1
4 x suitably sized bolts
4 x M6/M8 washers
At lea 4 x suitably sized acers

5.0 Mount safety hooks
Parts
Task
2 x M5x8mm Bolts
Secure the TV to the and with the safety hooks as shown.
Tighten all conneions.
4.0 Mount TV
Task
Hang TV on and

www.pdl.com