peerless-AV DS-MBZ942L-2X1 User manual

12015-07-29 #:203-9504-6 (2021-03-16)
DS-MBZ942L-2X1 DS-MBZ947L-2X1
ENG
200 lb
(91 kg)
MAX 200 lb
(91 kg)
MAX
40" - 42"
(102 - 107 cm)
46" - 48"
(117 - 122 cm)

22015-07-29 #:203-9504-6 (2021-03-16)
ENG - Before installing make sure the supporting surface will support the combined load of the equipment and
hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail.
Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift
and position equipment. This product is intended for indoor use only. Use of this product outdoors could lead to

call customer care at 1-800-865-2112.
WARNING
1
2
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
+1/2
4
3
Symbols
ENG
WARNING
ENG
#
Skip to step.
ENG
x3
Screws must get at
least three full turns

ENG
Do not overtighten screws.
ENG
Display center.
ENG
Tools Needed for Assembly.
ENG
7/16"
(11mm)
3/8"
(10mm)

32015-07-29 #:203-9504-6 (2021-03-16)
This page intentionally left blank.
ENG

42015-07-29 #:203-9504-6 (2021-03-16)
Parts (Before beginning, make sure you have all parts shown below).
ENG
A (2)
wall plate
Parts List DS-MBZ942L-2X1
Part #
DS-MBZ947L-2X1
Part #
Description Qty
Awall plate 2 146-1369 146-1372
Bleft adaptor bracket 2 146-1609 146-1609
Cright adaptor bracket 2 146-1608 146-1608
Dretaining collar 1 1800-375 1800-375
Elarge washer 1 540-9432 540-9432
FM5 x 16mm phillips screw 4 520-1189 520-1189
G1/4-20 x 1/2" phillips screw 4 510-9108 510-9108
HM6 x 12mm phillips screw 8 520-1128 520-1128
IM6 x 25mm phillips screw 8 520-1208 520-1208
JM8 x 12mm phillips screw 8 520-9571 520-9571
KM8 x 25mm phillips screw 8 520-1031 520-1031
L 16 540-9406 540-9406
M1/4" spacer 16 600-1215 600-1215
N4mm allen wrench 2 560-9646 560-9646
Ocable tie 6 560-9711 560-9711
Pmain frame 1 10002873-RBLK 10002873-RBLK
Qmain post 1 146-1434 146-1434
Rcarriage bolt 4 520-1175 520-1175
Ssmall washer 4 540-9440 540-9440
Tnylock nut 4 530-9413 530-9413
Uhex head screw 12 520-1321 520-1321
V#10 x 1/2" phillips screw 2 520-1320 520-1320
WM5 x 10mm socket pin screw 1 520-1164 520-1164
X#14 x 2-1/2" wood screw (not used) 8 - 5S1-015-C03
F (4)
M5 x 16mm G (4) 1/4-20 x 1/2" H (8) M6 x 12mm
520-1128
E (1)
large washer
D (1)
retaining collar
I (8)
M6 x 25mm
C (2)
right adaptor bracket
B (2)
left adaptor bracket

52015-07-29 #:203-9504-6 (2021-03-16)
O (6)
cable tie
N (2)
4mm allen wrench
P (1)
main frame
S (4)
small washer T (4) nylock nut
R (4)
carriage bolt U (12) hex head screw
V (2)
#10 x 1/2" phillips
screw
J (8)
M8 x 12mm
520-9571
K (8)
M8 x 25mm
520-1031
L (16)
 M (16) 1/4" spacer
W (1)
M5 x 10mm socket
pin screw
Q (1)
main post
X (8)
#14 x 2-1/2" wood screw

62015-07-29 #:203-9504-6 (2021-03-16)
1
T (4)
R (4)
P
S (4)
7/16"
(11mm)
Q

72015-07-29 #:203-9504-6 (2021-03-16)
P
2a-1
Q
2a-2
ED
2
2a-1 2b-1
Pole (MOD-P series)
ENG
Pole (EXT series)
ENG
Extension pole (sold separately)
ENG

82015-07-29 #:203-9504-6 (2021-03-16)
2a-3
N
W
3
Align slot of extension column with
one of holes in retaining collar.
ENG

92015-07-29 #:203-9504-6 (2021-03-16)
2b-1
Modular extension pole (sold separately)
ENG
P
Q
2b-3
2b-4
Refer to accompanying instructions for additional information.
ENG
MOD-ASC (sold separately)
ENG
Tighten.
ENG

10 2015-07-29 #:203-9504-6 (2021-03-16)
2b-5
N
W
Refer to accompanying instructions for additional information.
ENG