Peg-Perego Viaggio HBB User manual

USA
EN Instructions for use
FIUS1201I145
WARNING: Weight limits:
40 – 120 lbs
(18.2 – 54 kg)
Height limits:
39 - 55 inches
(99 – 140 cm)
• Do not install or use this
child restraint until you
read and understand all the
instructions in this manual and
the labels on the product. To
avoid serious injuries to your
baby, follow the instructions
carefully. Keep the instruction
manual in the dedicated
pocket for future reference.

2
Table of Contents
Introduction .....................................................................3
Warning ......................................................................5
Safety information .........................................................8
Registration form ..........................................................9
Your car seat ...................................................................10
Product assembly prior to use .................................11
Product features ............................................................14
Vehicle seatbelts design and compatibility ........16
Installing the seat in the vehicle ..............................19
Securing the child in the seat ...................................23
Headrest height adjustment ....................................26
Backrest angle adjustment .......................................27
Using the booster without backrest ......................28
Cleaning and maintenance .......................................31
Replacement Parts .......................................................38
© 2012 Peg Perego. All rights reserved.

3
Introduction
Thank you for choosing
a PegPerego Viaggio
HBB120 booster seat.
As with any other
PegPerego product, your
Viaggio HBB 120 has been
designed and certied
by a dedicated team of
engineers inside Peg
Perego Research and
Development Department.
Your Viaggio HBB 120
has been manufactured
and assembled in
a Peg Perego plant
under certied quality
procedures and using
rst quality materials of
certied tracked origins.
As with every car seat,
Viaggio HBB 120 is used
with a child inside a
vehicle,
travelling fast on
highways or slow in the
chaotic trac of today’s
cities. This means that
you need to use this
car seat as a concerned
parent, driving carefully
when you have a child
on board but also, before
this, taking your time
to explore the product,
knowing all the features
it has, the dierent
possible uses, the proper
and best installations.
Go through this manual
entirely, keeping your
new product in sight,
checking every point
and understanding
it. Install the product
in your vehicle taking
the necessary time and
making tting trials

4
before using it with your
child. Once you have read
the manual, store it again
in its proper pocket. This
will make you sure that
everybody looking after
your child and using this
seat will be able to look
for help in this manual.
Should you see any
malfunctioning feature,
after taking the necessary
familiarization or if you
see broken parts, do
not hesitate to call Peg
Perego Customer Service
@ 1-800-671-1701 for
help. Now that you know
your new Viaggio HBB
120 , you are ready to
enjoy safe and happy
journeys with your family
and your children.
Introduction

5
Warning
• Do not install or use
this child restraint until
you read and understand
all the instructions in
this manual and the
labels on the product.
To avoid serious injuries
to your baby, follow the
instructions carefully.
Keep the instruction
manual in the dedicated
pocket for future
reference.
• Your child could be
seriously injured if you
do not follow instructions
and warning labels
correctly.
• Use only the vehicle's
lap and shoulder belt
system when restraining
the child in this booster
seat. Snugly adjust the
belt around baby’s body
making sure that the belt
lies at with no slack.
• This car seats meets or
exceeds all applicable
Federal Motor Vehicle
Safety Standard 213
requirements for use
in motor vehicles. This
restraint is NOT certied
for aircraft use since
aircraft seats are normally
equipped with lap belt
only.
• Not all available models
of seatbelts are approved
for use with this product.
Refer to the dedicated
section in this manual for
further details.
• Viaggio HBB120 can be
secured to your vehicle
by means of lower
universal anchorage
system (LATCH) for added
stability. Refer to the
dedicated section in this

6
manual for installation
details and check your
vehicle owner’s manual
for further details.
• This car seat is designed
to be installed on front
facing vehicle seats only.
Never use on seats looking
sideways or rearward
facing. Do not use in cars
with door-mounted or
motorized shoulder belts.
Read your vehicle owner’s
manual for additional
information.
• According to accident
statistics, children are
safer when properly
restrained in the rear
seating positions.
• Complete and send
in the registration form
provided with this
product right away. In
case of an accident: if
this car seat is involved
in a car accident, it may
be no longer safe for use.
You may need to get a
new unit. Call customer
service @ 1-800-671-1701
for help.
• Seat covers and pads
provided in this product
are part of the product
and the certication
program. The use of
non approved covers or
other accessories are not
recommended .
• EPS components (white
soft foam located below
the upholstered covers)
are integrated in the
product as safety related
parts and should never
be removed or severely
damaged.
• Secure this car seat in
the car even when not
Warning

7
occupied. This car seat is
a heavy object that could
cause severe damage to
other occupants in case
of an accident.
• Keep ngers away from
moving parts.
Warning

8
Safety Informations
• Use Viaggio HBB120
in forward facing mode
with children weighing
in the range 40 – 120 lbs
(18.2 – 54 kg) and whose
height is between 39 and
55 inches ( 99 – 140 cm ).
• When placing your child
in the seat, make sure that
bulky jackets or covers are
removed. This will make
the use of seatbelts easier
and therefore correct.
• Do not leave your child
unattended in the vehicle,
even for a short period.
He/she could get tangled
in the straps and be
seriously injured or could
move or tip the seat.
• Do not leave the car seat
under direct sunlight for a
prolonged time. The seat
may become very hot and
burn your child’s skin.
• When not in use, store
the product in a proper
place, away from light,
moisture,
excessive heat or cold.
• Do not place this car seat
on countertops, tables or
soft surfaces.
• Do not try to remove
or add parts unless
where explained in
this manual; do not try
to repair this product.
In case of damage or
defective components,
call customer service @
1-800-671-1701 for help.
• Do not leave loose
objects, bags or luggage
in the vehicle cockpit. In
case of an accident they
could suddenly move
causing the occupants to
be injured.

9
Registration Form
Important! Child restraints could be recalled for safety
reasons. You must register this restraint to be reached
in a recall. Send your name, address and the restraint's
model number and manufacturing date to:
Peg Perego U.S.A., Inc. 3625 Independence Drive
Fort Wayne, IN 46808 Or call 1-800-671-1701 (toll free)
For recall information, call the U.S. Government’s
Vehicle Safety Hotline at 1-888-327-4236
(TTY: 1-800-424-9153) Or go to ttp://www.NHTSA.gov
Data required to ll the registration form (model
number, model name, date of manufacturing, etc.) are
indelibly printed on a label
located in the picture shown
here. Registration form is
attached to the product
cover. Detach the form, ll
in and mail to PegPerego.
No stamp is needed. We
have already paid for it.
Should the registration
form be missing, please call
Customer Service @ 1-800-
671-1701 for a replacement
form.

10
Your car seat
Recline handleCup holder
Seat
Armrest
Lap belt router
Backrest
Instruction
manual
pocket
Shoulder
belt router
Headrest
adjustable
handle
Latch
connectors
Headrest
Latch strap

11
Product assembly prior to use
1. Always check the
product prior to assembly.
The product is composed
of an headrest (a) a
backrest (b) and a seat
(c). Backrest and headrest
are factory assembled. To
assemble correctly the
product please follow
the instructions carefully.
In case of missing or
malfunctioning parts,
please contact our
Customer Service @
1-800-671-1701 for help.

12
Product assembly prior to use
2. Rotate the red stops
in the open position and
slide the backrest in the
housings located behind
the seat as shown in the
picture.
3. Keeping the product
flat, close the red stops
until a click is heard.

13
Product assembly prior to use
4. Rotate the backrest in
the elevated position (a)
until a loud click is heard.
The backrest will be free
to rotate between the
two stops as shown in the
picture (b). The product is
now ready for use.
IMPORTANT NOTE:
Viaggio HBB 120 is a
High Back Booster. Its
headrest and backrest
have been designed on
the experience made
in side impact dynamic
testing. Being designed
to elevate the seating
surface of your child,
it becomes extremely
important that your
child’s head, which
would lean close to a
glass vehicle window
in a backless booster, is
protected from injuries
at all times. Always use
this product with its
backrest and headrest.
A

14
Product features
1. The product is
equipped with two
integral cup holders,
located at the side of the
seat. To operate the cup
holder, simply pull /push
the part until it stops.
WARNING: never put
hot liquids in the cup
holder. Your child or a
nearby occupant may
become injured in case
of a turn or sudden stop.
2. The product is
equipped with a movable
foot to adjust seat angle.
The foot is spring loaded.
To operate it, pull the
handle located in front
of the seat and rise the
seat at the same time. The
foot will pop out in the
reclined position.

15
3. To return the foot to
the original position, pull
the lever again and push
the seat downward.
Product features

16
Vehicle seatbelts design and compatibility
Viaggio HBB is designed to be installed with vehicle
belts commonly fitted on most of the available cars.
However, in the market there are several different
types of vehicles manufactured in different periods.
As a result, there are many different vehicle belt
designs. Unfortunately, some may be unsuitable for a
safe installation of Viaggio HBB. Please read carefully
the list below and in case of problems or doubts,
double check your vehicle owner’s manual or call
PegPerego Customer Service @ 1-800-671-1701 for
additional help.

17
Vehicle seatbelts design and compatibility
NON COMPATIBLE VEHICLE BELT DESIGNS
WARNING: do not use Viaggio HBB with the
following vehicle belt design:
1. Lap/motorized
shoulder belts. Belts
mounted on the door
2. Lap belt only of any
kind.

18
NO
NO
NO NO
Vehicle seatbelts design and compatibility
3. Side facing seats
4. Rear facing seats or seats that rotate in dierent
positions
For your child’s safety, always read your vehicle owner’s
manual for further informations.

19
Installing the seat in the vehicle
1. Lean the child seat on
the selected vehicle seat
in forward facing mode.
2. Primo Viaggio HBB120
is equipped with LATCH
connectors to be used
with your vehicle’s lower
anchors.
Connectors are stored in
the back side of the seat.
To use the connectors,
push the central adjuster
in the front of the seat and
pull the connectors by
hand out of the housing
at the same time.

20
3. Attach the connectors
to the vehicle’s lower
anchors. An audible
click is heard when the
product is attached to
the lower anchors. Pull
the central strap (b) and
push the product against
the seat (c). Check that
the product is attached
by moving it sideways.
Attaching the child seat
with LATCH connectors
to the vehicle seat means
that it is possible to leave
it in place even when not
occupied.
4. To detach the product,
push on the central
adjuster to release the
child seat and move it
away from the vehicle seat.
Expose the connectors
red button and push the
Installing the seat in the vehicle
B
C
A