Pegasus SB-240 User manual

NOTE:
Pleasereadall instructions
carefullybefore usingthis
product
Table of Content
SafetyNotice
Hardware Identifier
AssemblyInstruction
Parts List
Model
SB-240
Retain This
Manual for
Reference
06-29-05
OWNER'S
MANUAL
Multi Purpose Bench
SB-240

TABLE OFCONTENTS
BEFORE YOUBEGIN...................................................................................... 1
IMPORTANTSAFETYNOTICES.....................................................................2
HARDWARE IDENTIFIER.....…....................................................................... 4
ASSEMBLY INSTRUCTIONS...........................................................................5
EXPLODED DIAGRAM……………………………………………………………… 8
PARTS LIST...................................................................................................... 9
BEFORE YOUBEGIN
Thank you for selectingthe SB-240Multi-PurposeBench.For your safetyand
benefit,read thismanual carefullybefore using themachine.As a
manufacturer, we are committed toprovideyou complete customersatisfaction.
1

IMPORTANT SAFETY NOTICE
PRECAUTIONS
This exercise machineis built for optimumsafety.However,certainprecautionsapply
whenever youoperatea piece of exercise equipment. Besuretoreadthe entiremanual
before youassemble or operate your machine.Inparticular, note thefollowing safety
precautions:
1. Keep childrenand pets awayfrom the machineat all times. DONOT
leavechildren unattendedinthesameroomwiththe machine.
2. Only onepersonat atimeshould use themachine.
3. If theuserexperiencesdizziness, nausea,chestpain, or anyother abnormal
symptoms,STOP the workout at once.CONSULT A PHYSICIAN IMMEDIATELY.
4. Positionthemachineonaclear, leveled surface. DO NOT usethemachine
near water or outdoors.
5. Keep hands awayfromall movingparts.
6. Always wearappropriate workout clothingwhen exercising.DONOTwear
robes or other clothing thatcouldbecomecaught inthe machine.Running
or aerobic shoes are also requiredwhenusing the machine.
7. Usethemachineonly for itsintendeduse as describedinthis manual.DO
NOT useattachmentsnot recommended bythe manufacturer.
8. Do notplace anysharpobject aroundthemachine.
9. Disabled person shouldnot usethemachinewithout a qualifiedperson or
physicianinattendance.
10. Beforeusingthemachine to exercise,always do stretching exercises to
properly warmup.
11. Never operatethe machine ifthemachineis notfunctioning properly.
12. Maximumuser weight300lbs.
CAREAND MAINTENANCE
1.Inspect and tightenallpartsbeforeusing themachine.
2.The machinecan becleanedusingadamp cloth andmild non-abrasive detergent.
DONOT use solvents.
WARNING: BEFOREBEGINNINGANY EXERCISEPROGRAM, CONSULTYOUR
PHYSICIAN.THISIS ESPECIALLYIMPORTANTFORINDIVIDUALSOVERTHE
AGEOF 35ORPERSONS WITH PRE-EXISTINGHEALTH PROBLEMS. READALL
INSTRUCTIONS BEFOREUSINGANYFITNESSEQUIPMENT.WEASSUME NO
RESPONSIBILITY FORPERSONALINJURYORPROPERTY DAMAGESUSTAINED
BYORTHROUGHTHE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.

2
WARNING LABEL PLACEMENT
3

HARDWAREPACK

4
ASSEMBLY INSTRUCTION
ToolsRequiredAssemblingtheMachine: AdjustableWrench andAllenWrench
NOTE: Itisstronglyrecommendedtwo or more peopleassembling thismachineto avoid
possible injuries.
STEP 1(SeeDiagram1)
A.)Push twoFront Stabilizer End Caps (#12) andFront Stabilizer Bases (#34) into theFront
Stabilizer (#1). PushtwoRear Stabilizer EndCaps (#13) andRear Stabilizer Bases(#35) into
theRear Stabilizer (#2).
B.)AttachaU-shaped Sleeve(#17) onto thebracket onthe Front Stabilizer (#1). Makesurethe
opening on theSleeveis facingtowards thefront.Attachthe Front Stabilizer to theFront
VerticalFrame(#4).Secure itwithtwo M8x3 1/8” AllenBolts (#25), four 5/8” Washers
(#28), and twoM8Aircraft Nuts(#32).
C.) AttachoneU-shaped Sleeve(#17) to thebracket onthe RearStabilizer (#2).Attachthe Main
Frame (#3) to theRear Stabilizer (#2). Secureit with twoM8 x31/8” AllenBolts (#25), four
5/8” Washers(#28),andtwoM8 Aircraft Nuts (#32).
D.) Connect theMain Frame(#3) to theFront VerticalFrame(#4).Secure thelower holewith one
M10 x3 ¾” AllenBolt (#22), two ¾” Washers(#33),andone M10 Aircraft Nut (#31). Insert a
L-shaped Lock Pin (#21) through theupper holeto lock the FrontVertical Frameinposition.
RemovethePin when folding the bench for storage.
E.)AttachtwoL-shapedBrackets (#9) to theMain Frame(#3).Securethemwith one M8x3 ½”
AllenBolt (#26), two 5/8” Washers (#28), andoneM8 Aircraft Nut (#32).

5
STEP 2(See Diagram2)
A.)Attach theInclineSupport (#6) inbetween thetwoBackrestSupports (#5).
B.)Attach thePivot of theBackrestSupports(#5) tothePivotontheMainFrame(#3).
Secure themwith one M12 x67/8” HexBolt(#27) andM12AircraftNut (#30).
DIAGRAM 2

6

STEP 3(SeeDiagram3)
A.)Place theSeat (#10) onto theMain Frame(#3).Secure itto thetwo L-shaped Brackets (#9)
withtwoM8x5/8”AllenBolts (#23) and 5/8” Washers(#28).Secure theSeattothe Main
Frame withoneM8 x1 ¾” AllenBolt (#24) and 5/8”Washer (#28).
B.)Place theBackrestBoard(#11)ontothe Backrest Supports (#5). Secure it withfour M8x1 ¾”
Allen Bolts(#24) and 5/8” Washers (#28).
C.) Attach theCross Tube (#7)tothe Front VerticalFrame(#4).Use aLock Knob(#16)tosecure
the Tubeat selectedhole. Push twoSmallFoamRolls (#14) ontothe Cross Tube.
D.) Insert the FoamTube (#8)halfwaythroughtheholeontheFront Vertical Frame(#4). Push
twoLarge Foam Rolls (#36) onto theTube.
E.)Lubricatetheinsideofthe FoamGrips(#15) withwater. Slide theFoamGrips onto theFoam
Tube(#8) fromboth sides.

DIAGRAM 3
7

8
Parts list
KEY NO.DESCRIPTIONQ’ty
1Front Stabilizer1
2Rear Stabilizer1
3Main Frame 1
4Front VerticalFrame 1
5BackrestSupport 2
6InclineSupport 1
7Cross Tube1
8FoamTube1
9L-shapedBracket2
10Seat1
11BackrestBoard1
12 2” Front Stabilizer EndCap2
13 23/8” Rear Stabilizer EndCap2
14Small Foam Roll 2
15FoamGrip 2
16LockKnob1
17U-shapedSleeve2
18 1” EndCap4
191” Square EndCap2
20Rubber Bumper1
21L-shapedLockPin1
22M10x3 ¾” AllenBolt1
23M8 x5/8” Allen Bolt 2
24M8 x1 ¾” AllenBolt 5
25M8 x3 1/8” AllenBolt4
26M8 x3 ½” AllenBolt 1
27M12x67/8” HexBolt1
28 5/8”Washer17
29M6 x5/8” PhilipsScrew1
30M12Aircraft Nut1
31M10Aircraft Nut1
32M8 Aircraft Nut5
33 ¾” Washer2
34Front Stabilizer Base 2
35Rear StabilizerBase2
36Large Foam Roll2

9