Pelvi.loc A2J User manual

2.
Cover the seat pants with the enclosed plastic hose
(which prevents the hook tape from get-ting caught in
the velcro surface of the seat cushion) between the
seat cushion and the back padding
1.
Carry the strap between the seat cushion and the
back cushion and close it on the back with the safety
lock and tighten the strap
3.
Pull the seat pants slightly up to the waist in the
crotch
4.
Position shoulder straps on the seat pants
Technology that connects
Installation instructions
Upper body - positioning to measure

A2J GmbH ∙ Am Fuchsberg 13 ∙ 87452 Altusried ∙ Tel.: [phone] ∙ Fax: [phone] ∙ [email protected] ∙ www.a2j-intl.com
DOC 01.01.2019
6.
Pull out the plastic sleeve of the seat pants to the
rear
5.
Pull the right side of the abdominal belt to the left,
then place the left side of the abdominal belt over
to the right and close it with the safety buckle
7.
Attach seated trousers with Velcro surface to
the Velcro surface of the center belt
Note:
• only with fine wash in the washing machine at 30 ° C washing
• do not spin
• do not put in the dryer
• Always secure OPS positioned person with car 3 point belt
Technology that connects