Pen Laboratory Smart Sheet User manual

ILS Communications Inc. www.penlab.co.kr
1
Smart Board
Low Cost Interactive Whiteboard
The Bluetooth Digital Pen
Pre-paired Bluetooth USB Dongle
Quick Installation Guide
QUICK SOFTWARE SETUP &DRIVER INSTALLATION

ILS Communications Inc. www.penlab.co.kr
2
The Bluetooth Digital Pen .................................................................................................................................... 5
Charge the battery ................................................................................................................................................ 6
Charge from a PC............................................................................................................................................... 6
Charge from a wall outlet ................................................................................................................................... 8
Bluetooth wireless technology ............................................................................................................................ 10
Installing the PC application .............................................................................................................................. 11
Taskbar Icons ...................................................................................................................................................... 14
How to connect the Digital Pen .......................................................................................................................... 15
How to Calibrate ................................................................................................................................................. 17
Test the Interactive Whiteboard ........................................................................................................................ 20
Using the Digital pen as a mouse ..................................................................................................................... 20
Switching the Digital pen on or off .................................................................................................................... 21
To switch on the Digital pen ............................................................................................................................ 21
To switch off the Digital pen............................................................................................................................ 23
To remove the Bluetooth Dongle from the USB port ....................................................................................... 24
To insert the Bluetooth Dongle into the USB port............................................................................................ 24
How to pair the Digital Pen with USB dongle................................................................................................... 26
To pair the Bluetooth Digital Pen with the USB dongle .................................................................................. 26
Pressure Sensitivity of the Digital Pen............................................................................................................... 30
Changing the tip of the Digital pen.................................................................................................................... 31
The main parts of the Digital pen ...................................................................................................................... 31
Battery information ............................................................................................................................................ 32

ILS Communications Inc. www.penlab.co.kr
3

ILS Communications Inc. www.penlab.co.kr
4

ILS Communications Inc. www.penlab.co.kr
5
The Bluetooth Digital Pen
When you use the Digital Pen for the very first time, fully charge up the built-in battery
first!

ILS Communications Inc. www.penlab.co.kr
6
The Digital pen is supplied with a USB cable and an AC / USB charger that you need when
you charge the battery. The Digital pen has an internal, nonremovable, rechargeable battery.
Do not attempt to remove the battery from the Digital pen as you may damage the pen.
Charge the battery
You can charge the Digital pen using the supplied USB cable, from your PC or from a wall
outlet using the supplied charger.
Charging the battery fully takes up to 2 hours depending on the charger.
Charge from a PC
To charge the Digital pen battery from a PC, do the following:
1. Open the USB cable, and place it on a flat surface.

ILS Communications Inc. www.penlab.co.kr
7
2. Switch on the PC, and plug the USB cable to the USB port on the PC.
3. To start charging, open the pen’s USB cover (located at the end of the pen), and
plug the USB cable.
4. Charging starts immediately. While charging the pen’s indicator lights up blue.
5. When the battery is fully charged, the blue indicator goes out.
6. Unplug the Digital pen and replace the USB cover.
7. Unplug the USB cable from the PC.
If you use a laptop PC that is not plugged into a wall outlet, charging the Digital pen
battery from the PC increases the demand on the PC battery and reduces battery life.

ILS Communications Inc. www.penlab.co.kr
8
Charge from a wall outlet
To charge the Digital pen from a wall outlet, do the following:
Warning: Use only chargers approved by us for use with this particular enhancement. The
use of any other types may invalidate any approval or warranty, and may be dangerous.
1. Open the USB cable, and place it on a flat surface.
2. Plug the charger into a wall outlet, and plug the USB cable to the USB port on the
charger.
3. To start charging, open the pen’s USB cover (located at the end of the pen), and
plug the USB cable.

ILS Communications Inc. www.penlab.co.kr
9
4. Charging starts immediately. While charging the pen’s indicator lights up blue.
5. When the battery is fully charged, the blue indicator goes out.
6. Unplug the Digital pen and replace the USB cover.
7. Unplug the charger from the wall outlet, and unplug the USB cable the charger.

ILS Communications Inc. www.penlab.co.kr
10
Bluetooth wireless technology
Bluetooth wireless technology makes it possible to connect compatible devices without cables.
A Bluetooth connection does not require that the computer and the Digital pen be in line of
sight, but both devices should be within 10 meters (30 feet) of each other. Connections may
be subject to interference from obstructions, such as walls, or other electronic devices.
The USB Bluetooth Dongle is compatible with any PC running Microsoft Windows
XP/Vista/7 (32bit/64bit). When you plug it in for the first time, you need to install drivers
from the CD. For the best performance, install the USB dongle in a free USB port on the front
of your PC.
Before software installation, insert Bluetooth USB Dongle into the USB port.
IMPORTANT: The USB Bluetooth Dongle is sensitive to static electricity. The highly sensitive
electrical adapter components can be damaged by static. To protect the peripheral, always touch
the metal case of the computer before handling the USB Bluetooth Dongle. This ensures that you
discharge any static electricity. You should avoid any contact with the metal connector when
handling the USB Bluetooth Dongle. Very dry weather or simply walking across the floor can
cause a static charge to build up on your body.

ILS Communications Inc. www.penlab.co.kr
11
Installing the PC application
Before software installation, insert Bluetooth USB Dongle into the USB port.
To use your Digital pen with your PC, you need to install the PC application provided on CD-
ROM.
1. Plug Dongle into USB port, it will pop-up “Found New Hardware Wizard” window
to request user to install software.
2. Click “Cancel” to close “Found New Hardware Wizard”.
3. Insert the Software Installation CD-ROM into the CD-ROM drive. Read the steps on
the pages and start to install.
4. A “Software Installation Wizard” window appears, click on “Next” to begin the
process.

ILS Communications Inc. www.penlab.co.kr
12
5. The “Destination Folder” screen appears, select the location of the driver & software
to be installed; click on “Next”.
6. The “Confirm Installation” window appears, click on “Next”. The “Software
Installation Wizard” will start the installation.

ILS Communications Inc. www.penlab.co.kr
13
7. The “Installation Progress Bar” will keep updating the install process.
8. If the “Driver signature note” window appears during the installation process, click
on “Continue” to continue with the installation. This may take a little time.

ILS Communications Inc. www.penlab.co.kr
14
9. Confirm the end of the installation process by clicking on “Finish” and restart your
computer, if you are prompted to do so.
Note: Please use “Windows Update”to check for any critical updates to the “.NET
Framework”.
Once the software has been installed the icon of “PanlabMgr”will appear on the desktop.
Taskbar Icons
The Taskbar icon provides visual indication of the current Digital pen/Dongle connection
state. The connection status icon is located on the lower right corner of your Windows
desktop. The Taskbar icon can be set to display or be hidden in the Tools Menu.

ILS Communications Inc. www.penlab.co.kr
15
A small icon of a Digital pen will appear in the system tray
How to connect the Digital Pen
1. Put the Bluetooth Digital Pen in pairing mode by keeping pressed the power button of
the Digital Pen for about 5 seconds. The Digital pen vibrates once.

ILS Communications Inc. www.penlab.co.kr
16
2. The light on the Digital Pen will now start flashing (blue and red) slowly, indicating
that Bluetooth Digital Pen is in pairing mode.
3. Pairing is completed when the light on the Digital Pen goes off for a few seconds and
it will start to flash again but more slowly in blue.
4. The status bar shows “Connected”, the current connection status of the Digital pen.

ILS Communications Inc. www.penlab.co.kr
17
How to Calibrate
1. Hover the mouse pointer over the Digital pen tray icon and click the right mouse
button. The pop-up menu appears.
2. Choose the “Configuration” menu item. In the second-level menu choose the
“Calibration”menu item.

ILS Communications Inc. www.penlab.co.kr
18
3. Hold the Digital pen in normal gesture, try to keep the Digital pen vertical to the
screen, click the nine calibration points (red crosses) one by one.
When calibrating, after you click by Digital pen one calibration point on the screen, if the
next point does not appear, or the system does not respond, you must exit, and start the
calibration program again to re-calibrate.

ILS Communications Inc. www.penlab.co.kr
19
4. Click “Yes” with the left mouse button to finish calibration.
You can not use the Digital pen to confirm the calibration! Confirm the calibration by
clicking “Yes” with the left mouse button.
Calibration may vary depending on the version of the program.

ILS Communications Inc. www.penlab.co.kr
20
Test the Interactive Whiteboard
Using the Digital pen as a mouse
You can use the Digital pen the same
way you use a mouse. Holding the
Digital pen on the screen makes a small
cursor appear. Moving the Digital pen
over the screen moves the cursor.
Tapping on the screen once is the same
as clicking with a mouse. A double-tap
constitutes a double click.
Right clicking with the Digital pen is accomplished by holding the Digital pen
tip down on the screen until a red circle surrounds the pointer as illustrated to
the right. Lifting the Digital pen from here opens up the corresponding
submenu.
Correct position
Do not lower the Digital pen too low.
Rotating the Digital pen upside down will
not activate the pen.
The pen’s optical sensor is pointing upward.
(Holding the Digital pen turned)
Incorrect positioning of the Digital pen may be the reason for recognition error. The
Digital pen will vibrate when incorrectly positioned. Please position the Digital pen
correctly as instructed above when the Digital pen vibrates.