Percussion Play Akadinda User manual

Surface Fixed
Components:
1. Carefully lay 3 x legs on a
level surface and check
distance between each leg is
equal. Join together the 2
parts of the symphony. Line
up pre drilled holes in the
backboards with the legs and
ensure the instrument is
aligned square with the legs.
Fix in place using M8x40mm
screws supplied (see
installation guide).
Installation Instructions
1260mm
Ground Surface
25 Kg
BS EN 1176
1.5m
Weight of heaviest part 12kg (Freechimes Left Panel)
1.5m
Install Instrument
with 1.5m free space
(from widest point)
around it.
Freechimes
Pentatonic
Symphony
Page 1 of 3
M6x20mm
Secure Screw
X6
M6 Saddle Straps
X3
M8x40mm
Secure Screw
X10
M8 Lock Washer
X10
Metric Conversion:
500mm/ 24”
700mm/ 33”
1.5m/ 59”
Spares available from
percussionplay.com or from your
local distributor
Pair Large Red
Beaters X2
Pair Small
Beaters X1
2. Attach Surface Fixing posts
to legs (See Surface Fix Post
Installation Sheet).
4. Fix Surface Plate to level
surface using Coachscrews,
Rawlbolts, chemical anchors
or similar as deemed
appropriate by Installer.
3. Locate Instrument in
desired location and mark
holes to fix to desired surface.
6. Beaters can be fixed to
Steel posts with fixings
provided.
5. Make sure all fixings are
covered and secure using
cover caps provided.
M10x70 Security Screw
x3
M10 Barrel Nut
x3
2 Part Cover Cap
x24

Surface Fixed
Assembly Guide PPFREC
25 Kg
BS EN 1176
Freechimes
Pentatonic
Symphony
Page 2 of 3
TX 40 Driver Bit
x1
TX 30 Driver Bit
x1
Tools:
Components:
M6x20mm
Secure Screw
X6
M6 Saddle Straps
X3
M8x40mm
Secure Screw
X10
M8 Lock Washer
X10
Spares available from
percussionplay.com or from your
local distributor
Pair Large Red
Beaters X2
Pair Small
Beaters X1
COMPONENTS LIST:
Saddle Strap X3
M8 Lock wa sher X10
M8x40 Pin torx X10
M6x20 Pin torx X6
M10x70 Pin torx X3
M10 Barrel Nut Pin torx X3
827mm Centres 827mm Centres

Surface Fixed
Surface Fix Post Installation
M10 Barrel Nut
x3
M10x70 Security Screw
x3
Components: Ground fix tube
protrudes 300mm
from ground surface
that inserts into the
base of the chime post
TX 45 Driver Bit
Tools:
x2
BS EN 1176
Thread Lock Solution
Required (Not Supplied)
Locate the Surface fix
Plate into the leg of the
instrument.
Fix instrument to Surface
fix plate using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
Fix Surface Plate to the
ground surface Ground
Anchors Not provided
cover fixings with caps
provided
12 3
Thread Lock Solution
Required (Not Supplied)
2 Part Cover Cap
x12
Freechimes
Pentatonic
Symphony
Page 3 of 3