Percussion Play Papilio Bells PPBUTR User manual

Surface Fixed 2. Use wooden jig to mark out
hole positions for each of the 3
legs in desired location upon
decision from customer. .
1. Attach Surface Plates to
base of each leg. (1.1) (See
Assembly Guide)
Ground Surface
1240
Installation Instructions
(1.1)
Instrument
Components:
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
Papilio Bells
Page 1 of 2
Weight of heaviest part 13kg (Notes)
BS EN 1176
36 Kg
M8 Barrel Nuts
x4
(1.1)
5. Once frame fixed in place
install notes using Fixings
provided. Finally install
beaters using fixings provided.
(See Assembly Guide)
M6x20mm
Secure Screw
Eye Straps
Pair Small Red
Beaters X4
Metric Conversion:
250mm/ 10”
550mm/ 22”
1240mm/ 49”
1.5m/ 59”
CAUTION: Papilio
surface can get hot
in direct sunlight, if
possible install in
shaded areas.
M6x12mm
Secure Screw
x4
x8
x4
M8 Nyloc Nut
x4
M8 Square Nut
x4
3. Fix to Surface using
recommended ground
anchors (Ground Anchors are
not supplied)
4. Make sure all fixings are
covered and secure using
cover caps provided
Surface Fix
Components: M10 Barrel Nut
x3
M10x40 Security Screw
x3 Ground Anchors
not supplied
2 Part Cover Cap
x12 Spares available from
percussionplay.com or from your
local distributor

CO MPONE NTS LIST:
Saddl e St rap X4
M6x20 Pin t orx X8
M8 Barrel Nut Pin torx X4
M8 Nyloc nut X4
M6x12 Pin t orx X4
2 Par t C over Cap X12
M10 x4 0 Pin torx X3
M1 0 Barrel Nut Pin torx X2
Surface Fixed
Instrument
Components:
Assembly Guide PPBUTR
(1.1)
Surface Fix
Components:
Papilio Bells
Page 2 of 2
BS EN 1176
15 Kg
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Pair Small Red
Beaters X4
TX 30 Driver Bit
x1
TX 45 Driver Bit
Tools:
x2
CAUTION: Papilio
Bells surface can get
hot in direct
sunlight, if possible
install in shaded
areas.
x4
M6x20mm
Secure Screw
Eye Straps
M6x12mm
Secure Screw
x4
x8
x4
M8 Nyloc Nut
x4
x4
M8 Square Nut
Attach notes to
centre post
using 2 access
holes in leg
M8 Barrel Nuts
TX 40 Driver Bit
x1
M10 Barrel Nut
x3
M10x40 Security Screw
x3 Ground Anchors
not supplied
2 Part Cover Cap
x12 Spares available from
percussionplay.com or from your
local distributor