Percussion Play Grand Marimba PPGMAR User manual

Surface Fixed
Installation Instructions
Instrument
Components:
Pair Large Red
Beaters X2 48 Kg
Grand Marimba
Page 1 of 3
BS EN 1176
M10x30 Security Screw
x4
Weight of heaviest part 40kg (Grand Marimba)
KS1,2
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m 1.5m
1.5m 1.5m
1. Attach the steel legs to
each end of the instrument
with the M10x30 security
screws. (See Assembly Guide)
10x3/4
Secure Screw
X4
Metric Conversion:
250mm/ 10”
400mm/ 16”
550mm/ 22”
1.5m/ 59”
Spares available from
percussionplay.com or from your
local distributor
(1.2)
6. Attach the 2 pairs of beater
to the under side of the
instrument
2. Attach Surface Fixing posts
to legs(1.2) (See Ground Fix
Post Installation Sheet)
4. Fix to Surface using
recommended ground
anchors not supplied
3.Locate Plate in desired
location and mark holes to fix
to desired surface.
5. Make sure all fixings are
covered and secure using
cover caps provided
Ground Fix
Components: M10x70 Security Screw
x4
M10 Barrel Nut
x4
2 Part Cover Cap
x16

Surface Fixed
Assembly Guide PPGMAR
10x3/4
Secure Screw
X4
Instrument
Components:
Pair Large Red
Beaters X2 48 Kg
Grand Marimba
Page 2 of 3
BS EN 1176
M10x30 Security Screw
x4
TX 25 Driver Bit
x1
TX 45 Driver Bit
x2
Tools:
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Spares available from
percussionplay.com or from your
local distributor
PPGRAM FRONT
PPGRAM SIDE
COMPONENTS LIST:
10x3/4 Pin torx Screw X4
M10x30 Pin torx X4
Saddle Strap X2
saddle straps for beaters attach to
underside of Grand Marimba body
M10x70 Pin torx X4
M10 Barrel Nut Pin torx X4
Ground Fix
Components: M10x70 Security Screw
x4
M10 Barrel Nut
x4
2 Part Cover Cap
x16

Surface Fixed
Surface Fix Post Installation
M10 Barrel Nut
x4
M10x70 Security Screw
x4
Components:
Ground fix tube
protrudes 300mm
from ground surface
that inserts into the
base of the chime post
TX 45 Driver Bit
Tools:
x2
BS EN 1176
Thread Lock Solution
Required (Not Supplied)
Locate the Surface fix
Plate into the leg of the
instrument.
Fix instrument to Surface
fix plate using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
Fix Surface Plate to the
ground surface Ground
Anchors Not provided
cover fixings with caps
provided
12 3
Thread Lock Solution
Required (Not Supplied)
2 Part Cover Cap
x16
Grand Marimba
Page 3 of 3