Percussion Play Surface Fixed User manual

Surface Fixed
Djembes
Page 1 of 2
1. Assemble Ground Fixing
Posts to base of sambas using
M8x25mm security screws
and lock washers. (1.1)( See
Assembly Guide)
Ground Surface
Installation Instructions
Djembes will arrive
on site in pre set
heights.
(1.1)
48 Kg
1.5m
1.5m
Install Instrument
with 1.5m free space
(from widest point)
around it.
Played with hands
Surface Fix
Components:
M8x25 Security Screw
x18
M8 Lock Washer
x18
Weight of heaviest part 23kg (Large Djembe)
BS EN 1176
500mm 500mm
Spares available from
percussionplay.com or from your
local distributor
860mm-710mm
2 Part
Cover Cap
x9
2.Arrange Djembes in
desired location and mark
holes to fix to desired surface.
3. Fix to Surface using
recommended ground
anchors (Ground Anchors are
not supplied)
4. Make sure all fixings are
covered and secure using
cover caps provided
Instrument
Components:
Djembes
are pre-
assembled
CAUTION: Drum
surface can get hot
in direct sunlight, if
possible install in
shaded areas.

Surface Fixed
Surface Fix
Components:
Assembly Guide PPDJEM
44 Kg
Played with hands
Djembes
Page 2 of 2
TX 40 Driver Bit
Tools:
x1
BS EN 1176
Spares available from
percussionplay.com or from your
local distributor
M8x25 Security Screw
x18
M8 Lock Washer
x18
2 Part
Cover Cap
x9
Instrument
Components:
Djembes
are pre-
assembled
M8x25 Pin torx X18
M8 Lock washer X18
COMPONENTS LIST:
2 Part Cover Cap X9