Perenio IONIC SHIELD PEWOW01COV User manual

Installation and Operation Manual
for the PERENIO IONIC SHIELD™
Cold Plasma Emitter
(Model: PEWOW01COV, PEWOW01COVUK)
December, 2021

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
© Perenio IoT spol s r.o. All rights reserved Document version: 1.0.8
Page 3 of 35
Table of Contents
Table of Contents ......................................................................................... 3
Introduction ................................................................................................ 5
Copyrights................................................................................................... 5
Disclaimer ................................................................................................... 6
Responsibility and Technical Support............................................................... 8
Conformance to Standards ............................................................................ 9
Warnings and Restrictions ............................................................................10
1 General Description and Specifications.........................................................16
1.1 Device Purpose ...................................................................................16
1.2 Technical Specification .........................................................................20
1.3 Device package...................................................................................22
1.4 Packaging and Labelling .......................................................................22
2. Installation and Setup ..............................................................................23
2.1 Preparation for Work............................................................................24
2.2 Operation Process ...............................................................................25
2.3 Removing and Replacing the CoV Capsule...............................................26
3 Maintenance and Repair ............................................................................29
4 Warranty.................................................................................................30
5 Storage, Transportation and Disposal of Devices ...........................................32
6 Other information .....................................................................................33
7 Troubleshooting........................................................................................34
8 Glossary..................................................................................................35
Figures and Tables
Figure 1 –Exterior (Side view) ......................................................................17
Figure 2 –Exterior (Top view) .......................................................................17
Figure 3 –Buttons, connectors and indicators..................................................18
Figure 4 –Scope of Supply ...........................................................................22
Figure 5 –Examples of installation.................................................................23
Figure 6 –View of the sticker atop the capsule ................................................24

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
Document version: 1.0.8 © Perenio IoT spol s r.o. All rights reserved
Page 4 of 35
Figure 7 –Tightening the capsule ................................................................. 24
Figure 8 –Capsule replacement process ........................................................ 27
Table 1 –LED Indicator statuses................................................................... 19
Table 2 –Basic technical specifications .......................................................... 20
Table 3 –CoV Capsule ................................................................................ 27
Table 4 –Typical Errors and Troubleshooting Methods ..................................... 34

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
© Perenio IoT spol s r.o. All rights reserved Document version: 1.0.8
Page 5 of 35
Introduction
PERENIO IONIC SHIELD™ is a Cold Plasma Emitter with CoV capsule (model
PEWOW01COV, PEWOW01COVUK) (hereinafter also referred to as the “Device” or
“Cold Plasma Emitter”). The Device intends to significantly reduce and suppress the
level of viral concentration in the enclosed area of application (air and surfaces), as
tested and confirmed by accredited laboratories. The viral concentration refers to the
family of viruses called coronaviruses. This includes the Severe acute respiratory
syndrome coronavirus 2 (SARS-CoV-2).
The Device emits complex groups of negative and positive ions of Mg, K, Pt, Au, Zn,
H and is developed to be used by human beings for prevention purposes against
infections caused by known coronaviruses. It has also undergone a clinical evaluation
demonstrating its conformity with the relevant general safety and performance
requirements. Such clinical evaluation will be ongoing throughout the life cycle of the
Device.
Classification of the Device: This Device is not a medical device.
Ozone concentration and radiations are tested below background levels. Ozon is
below limits as specified in Clause 32 of EN/IEC 60335-2-65.
The present Installation and Operation Manual (hereinafter also referred to as the
“Manual”) contains a detailed description of the Device, as well as instructions for its
installation and operation.
Copyrights
Copyright of ©Perenio IoT spol s r.o. All rights reserved.
Perenio®and PERENIO IONIC SHIELD™ trademarks are licensed to Perenio IoT
spol s r.o. (hereinafter referred to as the Perenio IoT). All other similar trademarks
and names, as well as logos and other symbols are the property of their respective
owners.
All materials under trademarks contained herein are protected in accordance with
international and local laws including Acts on Copyrights and related rights.
Any reproduction, copying, publication, as well as further distribution or public display
of material contained in the present document (whether in full or in part) shall not
be allowed until an appropriate permission of the copyright owner is obtained.
Any unauthorized usage of materials contained herein may lead to civil liability and
criminal prosecution in accordance with applicable laws.

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
Document version: 1.0.8 © Perenio IoT spol s r.o. All rights reserved
Page 6 of 35
Any eventual mentioning of other company names and equipment in the present
document is made solely for the purpose of clarifying and describing the device
operation and shall not infringe on the third party’s intellectual property rights.
Disclaimer
ANY PERSON ACQUIRING THIS PERENIO IONIC SHIELD™ model PEWOW01COV,
PEWOW01COVUK ACCEPTS THIS DESCLAIMER IN FULL AND ASSUMES FULL
RESPONSIBILITY FOR USING THE DEVICE IN ACCORDANCE WITH THE DIRECTIONS
OF USE, AS WELL AS FOR ANY CONSEQUENCES RESULTING FROM ANY
INAPPROPRIATE USE IN CONTRAST WITH THE INSTRUCTIONS OUTLINED IN THIS
MANUAL.
1. Although rigorous testing was performed in accordance with the adopted and
published virucidal standards, under no circumstances Perenio IoT and/or the
manufacturer of the Device claim total and absolute neutralization, and
subsequent impossibility of infection whilst using the Device. Perenio IoT
and/or the manufacturer of the Device shall not be liable to any person, who
while using the Device becomes ill or infected with any virus. Numerous factors
play role in virus transmission, which may occur in different ways and cannot
be completely eliminated, even if most of the viruses are neutralized in the
enclosed area of application as per the instructions herein.
2. The user understands and accepts that the possibility of getting a viral infection
heavily relies on each individual’s unique immune system response, thus the
reduction of the viral load in the enclosed area of application, does not
completely eliminate the possibility of transmission, even whilst using the
Device.
3. Any claims by the manufacturer and/or Perenio IoT for neutralization,
suppression and destruction of viruses, relate only to the acceptable decrease
of the viral load in the enclosed area of application, tested and confirmed in
line with the adopted international standards.
4. The cases of any adverse reactions to the ions emitted are regarded extremely
rare and are highly unlikely, as necessary measures have been taken to ensure
the acceptable degree of emission, regulated by international standards.
However, if an individual, whilst using the Device observes any adverse side
effects, he/she is strongly advised to stop immediately the use of the Device
and consult a healthcare professional.
5. While the Device is intended for prevention of infections caused by known
coronaviruses by significant reduction of level of the viral load in the enclosed
area of application, Perenio IoT and/or the manufacturer of the Device do not

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
© Perenio IoT spol s r.o. All rights reserved Document version: 1.0.8
Page 7 of 35
claim any therapeutic properties of the Device and they shall not be held liable
in relation to any underperformance in relation to any kind of therapeutic use.
6. Perenio IoT and/or the manufacturer of the Device cannot assume any
responsibility for any potential misinformation of the end-users by distributors
and/or resellers of the Device. Any claims in relation to the properties of the
Device which are not concurring with the officially published and regularly
updated specifications: intended use, performance, antiviral and anti-pathogen
properties, which can be found on the official website perenio.com, are void
and cannot serve as a legal ground for any claims against Perenio IoT and/or
the manufacturer.
7. Users understand and accept that the use of multiple Devices at once, as well
as any attempt to compromise the capsule’s enclosure, in a closed space, may
lead to release of high density of ions into the air, which may lead to side
effects. The use of multiple Devices must be in accordance with the restrictions
contained herein.
8. Perenio IoT and/or the manufacturer are not responsible and will not accept
any liability for claims for damages due to performance related issues, if:
•The Device is used in a manner which is not as prescribed in the Quick
Start Guide and/or this Manual;
•The body of the Device or the capsule have been tampered with;
•The input voltage and amperage are in any way changed;
•The top of the capsule has been in any way obstructed or covered with
foreign objects;
•The working and/or storage temperature is not within the range specified
by the manufacturer;
•The working and/or storage humidity is not within the range specified by
the manufacturer;
•The Device is used in high humidity environment like bathrooms or saunas;
•The Device is used in less than four (4) hours after been taken from cold
or humid environment;
•The Device is immersed in water or water was splashed at it, or it is
positioned in a wet place or a wet surface, resulting in water contact with
electrical parts;
•The user attempts to remove or replace the in-built battery;
•A non-original power adapter is used to recharge the Device;
•The Device is given to children, or put at ease of reach, with any
subsequent malfunctions as a result of such treatment;
•The Device is used without the capsule;
•The Device is used with a compromised capsule, or the counterfeit, or self-
made capsule.

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
Document version: 1.0.8 © Perenio IoT spol s r.o. All rights reserved
Page 8 of 35
•The Device is used in any manner that a reasonable person would deem to
be inappropriate or dangerous.
Responsibility and Technical Support
The present Manual is prepared in accordance with all necessary requirements and
contains detailed information on the Device installation, configuration and control,
valid as of the date of its last update.
Perenio IoT reserves the right to make corrections or changes to this Manual without
prior notice to the users of the Device and shall not be responsible for any
consequences which may arise from the use of an outdated version of the Manual,
as well as for any possible technical and/or typographical errors, either omitted or
accidental, or any related damage that may result from the use of the Device or the
present document.
The latest version of the Manual will always be available at perenio.com/documents.
In case of any discrepancies between the language versions of the Manual, the
English version shall prevail.
For any technical issues, please contact the Tech Support Department at perenio.com.
Manufacturer:
SIA Joule Production
Bauskas iela 58A-15, Riga, LV-1004, Latvia
www.joule.lv
Manufactured for:
Perenio IoT spol s r.o.
Na Dlouhem 79, Ricany –Jazlovice 251 01, Czech Republic
perenio.com

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
© Perenio IoT spol s r.o. All rights reserved Document version: 1.0.8
Page 9 of 35
Conformance to Standards
ISO
•Perenio IoT has been certified in accordance with EN ISO
9001 and EN ISO 14001
The Device is CE certified and complies with the requirements of
the following European Union legislation:
•2014/35/EU Low Voltage Directive;
•2004/30/EU Electromagnetic Compatibility Directive.
The Device complies with the UKCA marking requirements for
selling the Device in the UK
The Device has passed all procedures of assessments established
in technical regulations of the Eurasian Customs Union and
conforms with standards of the Eurasian Customs Union
The national conformity mark of the Ukraine indicating that the
device meets requirements of all applicable technical regulations
The Device complies with the requirements of Restriction of the Use
of Certain Hazardous Substances (RoHS) in Electronic and Electrical
Equipment (2011/65/EU Directive)
The external power source complies with STB 2463-2020 where
requirements for the environmental design of external power
sources in the area of average effective efficiency and power
consumption in idle mode are established
The crossed-out trash can symbol is used to label electrical and
electronic equipment, and indicates its separate collection.
The symbol is given in accordance with the Directive 2012/19/EU
on Waste Electrical and Electronic Equipment (WEEE)and indicates
that this equipment requires separate collection at the end of its
life and must be disposed of separately from unsorted household
waste.

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
Document version: 1.0.8 © Perenio IoT spol s r.o. All rights reserved
Page 10 of 35
To protect the environment and human health, please dispose of
used electrical and electronic equipment according to approved
safe disposal guidelines
Information about certificates received
is indicated in Section 7 of this
document. Copies of certificated and
declarations can be found in the
appropriate section on the website
perenio.com.
BG
CZ
DE
DK
EE
EL
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
RO
SE
SI
SK
Warnings and Restrictions
Prior to installation and operation of the Device, the user shall carefully read and
understand information contained herein.
ATTENTION! Warnings, precautions, and instructions specified in this document
may not contain every possible hazardous situation. Please use the common
sense when operating the Device.
ATTENTION! Electric shock hazard! Do not touch live parts!
ATTENTION! This device is not a medical device!
Warning Symbols and Icons
Electric shock hazard. The Device contains live parts
Indication on the need for the user to consult the Installation and
Operation Manual for important information such as warnings and
cautions
The Device is for indoor installation only

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
© Perenio IoT spol s r.o. All rights reserved Document version: 1.0.8
Page 11 of 35
Indication of the Device manufacturer
Indication of the manufacturer's catalogue number (product article) of
the Device. Same model is in products catalog of Perenio IoT so that it
can be easily identified
Indication of the temperature limits to which the Device can be safely
exposed
Indication of the range of humidity to which the Device can be safely
exposed
Indication of the range of atmospheric pressure to which the Device
can be safely exposed
Do not attempt to repair the Device, because it may cause electric
shock or other injury and will also void manufacturer’s warranty
Do not touch the Device with wet hands
Exposure of the Device to any liquids is prohibited
Indication that the Device can be broken or damaged if not handled
carefully
Indication that the Device needs to be protected from moisture
Indicates protection from particles of more than 2.5mm in diameter
and lack of protection from water
General Safety Operation Rules and Precautions
1. The Device shall only be used as described in the Quick Start Guide and this
Manual, to ensure maximum level of safety and in order to achieve its
envisaged result. Any unintended use may cause fire, electric shock, and other
hazards, as well as injury to persons.

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
Document version: 1.0.8 © Perenio IoT spol s r.o. All rights reserved
Page 12 of 35
2. The Device shall not be used for treatment purposes.
3. The Device shall never be used as the only source of protection against viral
infections.
4. The Device must be at a room’s temperature before it is operated. Failure to
comply with this requirement may cause electric shock and other hazards, as
well as will void the manufacturer’s warranty.
5. Do not use the Device in areas where sudden changes of the temperature occur
even if the ambient temperature range is within the specified limits, as this
may cause condensation.
6. The Device must not be immersed in liquids, and the liquids must not be
allowed to enter the Device.
7. Do not power on the Device without the capsule, or when the capsule is not
installed or not properly tightened (i.e. not in the “CLOSED” position).
8. Only the original capsule shall be used with the Device.
9. Do not block the capsule opening with hands or any other object.
10. Always power off the Device before removing or installing the capsule.
11. The Device shall not be kept, stored or used outdoors, as well as in areas exposed
to direct sunlight, moisture and/or dust, or near air humidifiers or heaters.
12. The Device must not be used in areas exposed to conductive powder or dust,
oil mist, salt, organic solvent, machining chips, particles or cutting oil
(including water and any liquids), etc.
13. The Device must not be operated in areas where combustible gas, aerosol
units, oxygen and/or hydrogen are stored, or where the air pressure is more
than two times higher or lower than the atmospheric pressure.
14. The Device must not be operated in areas where gas-powered stoves and
ovens, as well as flammable or combustible units or vapors may be present.
15. It is forbidden to drop or insert objects into any openings of the Device or the
capsule.
16. The Device must not be operated in areas with strong electromagnetic noise
or where static electricity is generated to the Device.
17. The Device must not be operated in areas subject to potential lightning strikes
or where the direct impact or vibration may be applied to the Device.
18. The Device must not be operated if it is damaged or cracked in any way.
19. It is not allowed to drop, throw or disassemble the Device or any part of it, as
well as attempt to repair them on one’s own.
20. Do not throw the Device into the fire.
21. Do not operate the Device under a blanket or pillow.
22. Use a dry cotton cloth to clean the Device. The Device must be turned off and
unplugged before cleaning. Do not use cleaning agents or detergents to clean
the Device, as well as gasoline, furniture polish, or rough brushes, because
this may cause deterioration to the surface of the Device.

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
© Perenio IoT spol s r.o. All rights reserved Document version: 1.0.8
Page 13 of 35
23. Store the Device in a cool, dry location when not in use. Use the original packaging
to repack the Device during such periods to prevent dust and dirt build-up.
24. Keep children away from the Device as it contains live parts. This Device is
intended to be operated by adults only.
Warnings Related to the use of multiple Devices
It is not recommended to operate several Devices at once next to each other at a
distance less than 1 meter between each Device in the enclosed area of application,
to avoid the risk of oversaturation with ions.
Warnings Related to the Power Adapter
1. Only the original power adapter included in the packaging shall be used to
charge the Device. The use of a non-original power adapter will void the
manufacturer’s warranty.
2. Do not use the power adapter of the Device to recharge any incompatible
devices*.
3. Do not touch the power adapter or its cable with wet hands.
4. It is forbidden to connect a USB-PD (Power Delivery quick charge technology)
power adapter to the Device.
5. Perenio IoT and/or the manufacturer shall not be liable for any damages
resulting from the use of the power adapter in a manner other than as outlined
herein.
ATTENTION! It is not allowed to charge the Cold Plasma Emitter from devices
such as a PC, a laptop, a tablet, a smartphone, etc., since typical USB2.0/USB3.0
ports support a maximum current of up to 500mA and 900mA, respectively, at
5V which is insufficient to provide the required input power of 10W. At the same
time, if any USB Type-C ports are available in the above devices, they are
intended for recharging of such devices only, so Perenio IoT and the manufacturer
do not guarantee normal and safe operation of the Cold Plasma Emitter in the
case of using incompatible power adapters and assumes no responsibility for any
possible damage that may be done from such use.
NOTE. If a portable charger is used to charge the Cold Plasma Emitter, you shall
make sure that output parameters of such charger meet the requirements for the
power adapter of the Cold Plasma Emitter*.
* For more information on the power adapter, see the description in Table 2 (Par. 1.2).

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
Document version: 1.0.8 © Perenio IoT spol s r.o. All rights reserved
Page 14 of 35
Warnings Related to External Influences
Atmospheric pressure: The Device shall be operated and stored in areas where the
air pressure is normal or is less than two times higher or two times lower than the
atmospheric pressure.
Temperature ranges: The Device shall be operated and stored at a non-freezing
temperature only. For details, see Table 2 in par. 1.2 below.
Humidity: The Device shall be operated and stored in non-condensing environment
only. For details, see Table 2 in par. 1.2 below.
Limitations Related to Ionic Substance in the CoV capsule
Based on performed safety tests of the Device, the ionic substance in trays located
in the capsule are known to be non-toxic for humans.
Indications and Intended Use
The Device is NOT intended for treatment purposes but only for prevention of
infections caused by the known coronaviruses by means of significant reduction of
the level of viral concentration in the enclosed area of application.
Residual Risks, Contra-Indications and Side Effects
The Device shall not be used by people with reduced physical, sensory or mental
capabilities, unless they have been given an adequate supervision by a person
responsible for their safety.
For the following categories of people, a healthcare professional shall be consulted
prior to their exposure to the Device: pacemaker patients, pregnant and
breastfeeding women, minors, and people with a history of respiratory problems,
heart or lung diseases.
Based on clinical trials performed, the only possible side effect reported by the
volunteers exposed to the Device, is the dry eyes. Clinical trials evaluating the
general safety and performance requirements of the Device will continue, and any
updates will be included in the Manual available for downloading at
perenio.com/documents.

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
© Perenio IoT spol s r.o. All rights reserved Document version: 1.0.8
Page 15 of 35
Incident Reporting
In case of any health related or other incidents, that have occurred due to the use of
the Device, the users shall report such incidents:
•by submitting the online PEWOW01COV User Feedback Form; or
•by e-mail at [email protected]; or
•by e-mail to the manufacturer at [email protected].
The user may also report any serious incidents in relation to the Device to the
competent authority of the Member State in which the user is established.

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
Document version: 1.0.8 © Perenio IoT spol s r.o. All rights reserved
Page 16 of 35
1 General Description and Specifications
1.1 Device Purpose
PERENIO IONIC SHIELD™ PEWOW01COV, PEWOW01COVUK is a Cold Plasma
Emitter which consists of two major components:
•CoV capsule with two trays filled with ionic substance based on salts of Mg, K,
Au, Pt, Zn. The trays create anode and cathode;
•Electric multiplier in input of 5V and up to 2A and output 14kV applied to the
anode and cathode to emit ions of the elements into the air.
The intended use of the Device is the prevention of infections in human beings caused
by the known family of coronaviruses (including SARS-CoV-2), as the emitted ions
have high enough kinetic energy to destroy positively charged outer shell of the
membrane of coronaviruses and negatively charged RNA of such viruses.
The Device is for personal use in closed spaces. Ion concentration is most sufficient
two meters around it. The recommended minimal distance from the Device is 25 cm.
Key functional features of the Cold Plasma Emitter are:
•The life cycle of CoV capsule is approximately 12 months of intensive use. The
user can replace the CoV capsule with a new one;
•Operation from a built-in battery and/or the mains*;
•Ability to be charged from a portable charger*;
•Ease of use –no configuration required;
•Compact design and possibility to be operated in almost any closed space.
* For details, see the “Power” line in Table 2 (Par. 1.2).

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
© Perenio IoT spol s r.o. All rights reserved Document version: 1.0.8
Page 17 of 35
Figure 1 –Exterior (Side view)
Figure 2 –Exterior (Top view)

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
Document version: 1.0.8 © Perenio IoT spol s r.o. All rights reserved
Page 18 of 35
Figure 3 –Buttons, connectors and indicators
Buttons, Ports and Indicators
LED Indicator
Light indicator around the power button intended to show
various Device states (See Table 1)
Power button
Device on/off button
USB-C Port
Port used to connect the Device to the source of power (Power
Delivery is not supported)
CoV capsule
Replaceable module with metal salt composition from which
negative, positive and bipolar ions are emitted
Mounting holes
Holes in the Device casing used for mounting purposes
Mounting
Hole
LED
Indicator
Power Button
USB-C Port
Capsule
Mounting
Hole

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
© Perenio IoT spol s r.o. All rights reserved Document version: 1.0.8
Page 19 of 35
Table 1 –LED Indicator statuses
Indicator
Status
Description
Green
On
The Device is switched off and plugged in to the mains
socket. The battery is charged.
Battery level: 75% to 100%
Blinking
The Device is switched on and plugged in to the mains
socket, or battery-operated. The battery is charged.
Battery charge level: 75% to 100%
Yellow
On
The Device is switched off and plugged in to the mains
socket. The battery is being recharged.
Battery level: 30% to 74%
Blinking
The Device is switched on and plugged in to the mains
socket, or battery-operated.
The battery is being recharged.
Battery charge level: 30% to 74%
Red
On
The Device is switched off and plugged in to the mains
socket. The battery is being recharged.
Battery level: 1% to 29%
Blinking
The Device is switched on and plugged in to the mains
socket, or battery-operated.
The battery is being recharged.
Battery charge level: 1% to 29%
Blue
Blinking
The capsule is missing from the Device (The LED will
blink for 3 seconds after pressing the power button)
Red-blue
Blinking
Battery malfunction (Please contact our Tech Support
Department)
Off
The Device is switched off and disconnected from the
mains socket

Installation and Operation Manual for the
PERENIO IONIC SHIELD™ Cold Plasma Emitter
Document version: 1.0.8 © Perenio IoT spol s r.o. All rights reserved
Page 20 of 35
1.2 Technical Specification
Table 2 –Basic technical specifications
Parameter
Value
Product Article
PEWOW01COV, PEWOW01COVUK
Device type
This Device is not a medical device
Capsule type
CoV capsule. Two trays filled with ionic substance
(including salts of ions of Mg, K, Zn, Pt, Au) in porous
structure of polymer gel
Principle of operation
Bipolar ionization of the ionic substance by applying
14kV to the trays which form anode and cathode
Ion emission intensity
Up to 40,000 ion/cm³ at 50 cm from the Device
Ionization area
1. Two meters around the Device with immediate
effect once the Device is switch on (LED blinks
green or yellow or red)
2. Closed space up to 60 m3 after 30 minutes of
operation of the Device
Recommended distance
from the Device
At least 25cm distance from the Device in operation
Ozone generation
Below 0.16x10-8
Device calibration
Not required
Power
Power: up to 10W
Input voltage: DC 5V
Input current: 2A
Internal voltage: 13.8KV
Port: USB-C (Power Delivery is not supported)
Battery
Type: Lithium-ion, built-in
Capacity: 2,600mAh
Charging time: 3 hours
Discharging time: up to 6 hours
Standby discharge time: up to 60 days
Service life: 600 recharge cycles
Power Adapter
Type: USB-C (Power Delivery is not supported)
Input voltage: 100VAC to 240VAC