Perimeter View PVW1 User manual

1. Press and hold monitor [Power] button
for 3 seconds to power on monitor. Wait
for monitor to turn on.
2. Press and hold [Pairing] button on the
monitor. The monitor will being 30 sec-
ond countdown.
 Step 3 must be completed during
30 second countdown
 Repeat step 2 if countdown ends
before completing step 3.
PVW1 Wireless Camera Pairing Guide

3. Move metal button to top hole on back of
camera. Screw the button in. The LED
near camera lens will repeatedly flash am-
ber/red/amber/red. Repeat step 2 if step 3
is not completed during 30 second count-
down.
4. Move the metal button to the bottom
hole on back of camera. Screw the button
in.
5. Confirm monitor displays camera view.
PVW1 Wireless Camera Pairing Guide

PVW1 Examples
No picture on monitor. LED on camera is red.
NOT Paired
Paired
Monitor displays picture. LED on camera is amber.