Perlecare PCWB01 User manual

Model:PCWB01
V3.0
Weight Bench
Instruction Manual
Thank you for choosing this Perlecare product! At Perlecare we strive to provide
you with the best quality products and services in the industry. Should you have
any issues, please don't hesitate to contact us.
Technical Support:
[email protected](US/CA)
[email protected](DE/UK/FR/IT/ES/AU)
English ------------------------ 01-08
Deutsch ------------------------ 09-16
Français ------------------------ 17-24
Español ------------------------ 25-32
Italiano ------------------------ 33-40

IMPORTANT SAFETY INFORMATION：
• Please carefully read all instructions before attempting
installation. If you do not understand the instructions or have any
concerns or questions, please contact our customer service at
[email protected].
• CAUTION: Avoid potential personal injuries and property damage!
• Do not use this product for any purpose that is not explicitly
specified in this manual. Do not exceed weight capacity. We are not
liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
• Be sure all nuts and bolts are tightened prior to use.
• Use with caution when getting on or off the product.
• If you feel faint, light-headed or dizziness while operating the
product, stop exercising immediately. You should also stop
exercising if you are experiencing pain or any kind of discomfort.
• Keep children and pets away from the product at all times.
• Always use this product on a clear and level surface. Do not use
outdoors or near water.
• Keep hands and feet away from any moving parts. Do not insert
any object into any openings.
• It is recommend to wear sportswear when using this product.
Keep loose clothes, jewelry, limbs and long hair away from moving
parts.
• Children under the age of 13 should not use this product.
• Children from 13 to 18 should use the product under adult
supervision.
EN

x1
01
Front Stabilizer
x1
02
Support Pillar
x1
03
Main Frame
x1
05
Priest Pad
Handle Bar
Leg Support
Bolt and Nut Bolt and Nut Bolt and Nut
WrenchSmall Safety PinBig Safety Pin
Resistance Band Knob
Supplied Parts and Hardware List
x2
x1
04
07
x1
06 x1
08
x2
Ax1
C
x1
B
x3
Dx1 Ex2 F

01 A-2
A-1
02
A
Step 2 Fully Unfold the Main Frame [03]
Step 1 Secure the Support Pillar [02] to the Front Stabilizer [01]
F
03
A-2
A-1

Step 3 Secure the Support Pillar [02] to the Main Frame [03]
03
02
D
Insert the safety pin [D] to the main frame [03].
Insert the back support
into the desired slot
7-level Tilt Adjustment
Big Safety Pin

Step 4 Insert the Handle Bar [04] to the Priest Pad [05]
D
04
05
B
B-2
B-1
F
B-2
B-1
F
Use a wrench [F] to hold the
nut [B-2] while use the other
wrench [F] to tighten the bolt
[B-1]
Big Safety Pin
B-1
①
② ③

Step 5 Secure the Priest Pad [05] into the Support Pillar [02]
05
05
03
02
08
D
Tighten
After you choosing the priest pad [05] to your desired
height, insert the safety pin [D] into the hole to lock
the height.
7-level height adjustment
④
Big Safety Pin

Step 6 Secure the Leg Support [08] to the Support Pillar [02]
C
C-2
C-1 F
C-1
C-2
Use a wrench [F] to hold the nut [C-2] while use
the other wrench [F] to tighten the bolt [C-1]
2-Level Angle Adjustment
E
Small Safety Pin

Step 7 Attach the Resistance Bands [07] to the Front Stabilizer [01]
01
02
07
07
If the unit is unstable,
you can adjust the
covers to level it.