Perlesmith PSTVS04 User manual

4

•Carefully open the carton, remove contents and lay out on cardboard or other
protective surface to avoid damage.
•Check package contents against the Supplied Parts List in the next page to
assure that all components were received undamaged. Do not use damaged or
defective parts.
•Not all parts and hardware included will be used. lf you require replacement
parts, contact customer service at [email protected]
•Carefully read all instructions before attempting installation.
•If you do not understand the instructions or have any concerns or questions,
please contact customer service at [email protected]
•This product may contain moving parts. Use with caution.
•Do not use this product for any purpose or in any configuration not explicitly
specified in this instruction. We hereby disclaim any liability for injury or
damage arising from incorrect assembly. incorrect mounting, or incorrect use of
this product.
UNPACKING INSTRUCTIONS AND IMPORTANT SAFETY INFORMATION
1
Connecting the Support Pillar to Tempered Glass
Step 1
Pillar
Pads
3
1
4
R
C
Gasket
（V）
Allen Wrench

2
Connecting the TV Plate to Support Pillar
Step 2
Attaching wire clips (J
pillar
Allen Wrench

3
Measure the distance between the holes located at the
back of your TV (these measures may form the shape of a
square, or a rectangle) and check that these taken
measures are within the VESA (*) range for this wall
mount. (*) VESA: International standard established by the
TV manufacturers used to determine if LCD/LED TVs are
compatible with wall mounts.
Measure VESA and Check TV screws
400mm
400mm
Mounting the TV Bracket to a TV
Step 3
TV Bracket
M6x35 Bolt
M8x25 Bolt M8x50 Bolt
φ8.5x18x22
Spacer
φ8.5x18x2.5
Spacer
φ8.5x18x10
Spacer

4
Option A (For Flat Back TV)
Option B (For Round Back TV)
Spacers may be necessary for 2 holes ONLY.
Option C (For TV with A “Bump”)
F
A to E
F
A to E
A to E
F
H/I
A to E
F
G/H/I
If the length of the screws is too long, the spacers
can be used in multi-layer. If the installation fails
after trying various methods, please contact customer
service at [email protected].

5
Insert the safety lock in the bottom of
the bracket and then tighten the screws.
Attaching TV to the TV Plate and Managing the Wires
Step 4
Option D
Spacers maybe necessary when brackets
interfere with cables or USB.
L
TV brackets are two-height-adjustable.
You can choose the proper height.
K
“Be gentle”