
Montaż/Installation
2
01WSC/2019/DP
1
M8x50 DIN 912 A2
M681 x30
M8x20 DIN 912 A2
M485 x12
M12x30 DIN 933
M826 x116
M12 DIN 125 A2
XPF_M631x232
M12 DIN 934 A2
M635 x116
J K L M N
17Nm 17Nm 57 Nm 57 Nm
M16x140 DIN 933 A2
M873 x8
M16 DIN 125 A2
M874 x8 M882 x116 M892 x8
M16 DIN 934 A2
M875 x8
O P R S T
140 Nm 140 Nm
1400
0021
1000
Fundamenty należy wykonać w formie bloków
żelbetowych z betonu C20/25. Proponowany poziom
posadowienia wynosi -1200 mm poniżej poziomu
terenu. Rozstaw fundamentów jest uzależniony od
gabarytów zakupionej konstrukcji. Materiały: beton
C20/25, stal RB500W, otulina 75 mm spód, otulina 50
mm - pozostałe
/The foundations should be made in the form of reinfor-
ced concrete blocks made of C20 / 25 concrete. The
proposed level of foundation is -1200 mm below the
ground level.
The foundation spacing is dependent on the dimensions
of the purchased structure.
Materials: C20 / 25 concrete, RB500W steel, 75 mm
lagging, 50 mm cover - other
Rozstaw i liczba stóp jest
uzależniony od typu konstrukcji WSC
Spacing and number of feet depends
on the type of WSC construction
F
2
M12 DIN 127 A2 M16DIN 127 A2