PETDIARY T730 User manual

T730
600M Rechargeable
Remote Training collar
-User Manual
Please read this entire User Manual before beginning
08
A B
A
B

Precautions
Table of contents
Precautions 1
Main Features 2
Relevant description
Transmitter description 3
Receiver description
Charge the remote transmitter
To turn the Transmitter on
Charge the collar receiver
To turn the Receiver Collar on
4
4
5
5
5
6
7
3
Precautions 2
product Description
How to Use it
How to Connect transmitter and
receiver
To turn the Receiver Collar off 5
Connect transmitter and receiver 5
How to use the Test Light 5
Important Notice
7
Summary of Frequently Asked
Questions
8
FCC Compliance
9
Declaration of Conformity
10
Declaration
10
Reference Size for
Different Dogs
1 X Handheld Transmitter
1 X Receiver with Nylon Collar Strap
1 X USB Charging Cable
2 x Silicone cap
1 X Test Light
1 x User Manual
1 x Lanyard
Other ltems You May Need
Components
Remote Transmitter
Collar Receiver
USB Charging Cable
Test Light Silicone cap
User Manual
Wrist Strap
T730
600M Rechargeable
Remote Training collar
-UserManual
Please read this entire User Manual before beginning
08
A B
A
B

IMPORTANT SAFETY INFORMATION
Thank you for choosing our product. You can
sync the remote transmitter and collar receiver
to operate spray/vibration function to discourage
your dog from unwanted behaviors and
effectively train your dog at a long distance.

This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates
a hazardous situation which, if not avoided, could result
in minor or moderate injury.
CAUTION, used without the safety alert symbol,
indicates a hazardous situation which, if not avoided,
could result in harm to your pet.
Not for use with aggressive dogs. Do not use this product
if your dog is aggressive, or if your dog is prone to aggressive
behavior. Aggressive dogs can cause severe injury and even
death to their owner and others. If you are unsure whether this
product is appropriate for your dog, please consult your
veterinarian or certified trainer.
Do not puncture or incinerate the collar or the refill cannister.
Do not expose to extreme heat or store at temperatures
above 113 °F or 45 °C.
Lithium Rechargeable Batteries.This device contains
Lithium-Polymer (Li-Polymer) batteries; never incinerate,
puncture, deform, short-circuit, or charge with an inappropriate
charger. Fire, explosion, property damage, or bodily harm
may occur if this warning is not followed.
Do not expose the device to freezing temperatures
(32 °F or 0 °C) or to conditions warmer than 113 °F or 45°C.
Do not leave the collar in direct sunlight. Never leave the collar
in a car where the device can heat up to high temperatures
(113 °F or 45 °C).
•Contains gas under pressure; may explode if heated.
•Wear protective gloves / eye protection / face protection.
•Do not breathe dust / fume / gas/mist / vapors / spray.
•In case of inadequate ventilation, wear respiratory protection.
•If exposed or concerned: Get medical advice / attention.
•Protect from sunlight. Store in a well-ventilated place. Do not
puncture. Do not burn.
•Keep out of reach of children.
•Avoid leaving the collar on the dog for more than 12 hours
per day.
•When possible, reposition the collar on the pet’s neck every
1 to 2 hours.
•Check the fit to prevent excessive pressure; follow the
instructions in this manual.
•Never connect a leash to the electronic collar.
•When using a separate collar for a leash, don’t put pressure
on the electronic collar.
•Wash the dog’s neck area and the contact area of the collar
weekly with a damp cloth.
•Examine the contact area daily for signs of a rash or a sore.
•If a rash or sore is found, discontinue use of the collar until
the skin has healed.
•If the condition persists beyond 48 hours, see your veterinarian.
WARNING
CAUTION
CAUTION
CAUTION
WARNING
CAUTION
FIRST AID TREATMENT:
If inhaled, get medical attention if you feel unwell. After skin
contact, rinse affected area with soap and water. After eye
contact, rinse/flush eyes gently using water for 15-20 minutes.
This product is not a toy. Keep it away from the reach of children.
Risk of skin damage. Please read and follow the instructions
in this manual. Proper fit of the collar is important. A collar worn
for too long or made too tight on the pet’s neck may cause skin
damage. Ranging from redness to pressure ulcers; this
condition is commonly known as bed sores.
These steps will help keep your pet safe and comfortable.
Millions of pets are comfortable while they wear smooth contacts.
Some pets are sensitive to contact pressure.You may find after
some time that your pet is very tolerant of the collar.If so,you
may relax some of these precautions.It is important to continue
daily checks of the contact area.If redness or sores are found,
discontinue use until the skin has fully healed.
This Remote Spray Trainer must be used only on healthy dogs.
We recommend that you take your dog to a veterinarian before
using the collar if he is not in good health.
1. Brand-new Signal Wake-up Technology, battery work time up
to 90 Days.
2. Pioneering Design with separated adjustable Tone level.
3. Humane Design-Maximum Static Stimulation Period is 5
seconds.
2.Main Features
-1- -2-

3.Relevant Description
4. 3 training modes: static stimulation/ vibration/ tone. 0-3
Adjustable Intensity Levels for Tone; 0-8 Adjustable Intensity
Levels for Vibration;0-16 Adjustable Intensity Levels for
Static Stimulation. If the level set 0, the mode is inhibited.
5. IPX6 Waterproof Receiver Collar and IPX5 Waterproof
Transmitter.
6. Maximum remote range up to 600m in the open area
without any interference.
7. Train up to 2 dogs with one remote transmitter (separately
purchase additional receiver)
8. Rechargeable collar and transmitter.
08
A B
A
B
Static
Stimulation
Button
Intensity Up/
down Button
Vibration
Button
Tone
Button
Charging
port
Channel
Button
LCD Screen
❶Transmitter description
switchIndicator light Charging port
①.LCD Screen:
The LCD Screen will display different modes of the collar
and the different channels for two collar receivers as well
as battery indication.
Channel A/B will be desplayed on the screen
②.Static Stimulation Button: Pressing the “Static Stimulation”
button,the receiver will emit static stimulation. If set level 0 ,
NO stimulation
③.Vibration Button: Pressing the “Vibration” button, the receiver
will vibrate. If set level 0, NO vibration
④.Beep Button: Pressing the “Beep” button, the receiver will
emit beep sound. If set level 0, NO beep
⑤.Intensity Up/down Buttons: Selects intensity level of beep,
vibration and static Stimulation.
⑥.Channel Button: Pressing this “A B”button will shift channel
between the first and second collar receiver.
⑦.Charging port: Insert charging cable into charging port to
charge the Transmitter.
⑧. Turn on/off the Receiver:Turn on/off the receiver by press
the “Power” button one time.
⑨. Micro USB port: Insert charging cable into Micro USB port
to charge the receiver.
1. Charge the remote transmitter
1) Connect the charger cable to the charging port.
2) Plug the charger into a standard outlet.
3)The icon of battery will flash.
4) Charge the transmitter for about two hour for the first charge
or until the icon of battery stops flashing.
4.How to Use It
Note: Please charge before using the product!
❷Receiver description
-3- -4-

2. To turn the Transmitter on
1) Press any button to active the Transmitter. The backlight on.
2) Backlight will stay for about 5 seconds. if no operation then,
backlight off.
3) LCD display will stay for about 5 seconds. if no operation
then, LCD display shuts off.
3. Charge the collar receiver
1) Connect the charger cable to the Micro USB port.
2) Plug the charger into a standard wall outlet.
3) The red light will flash on the receiver
(If not or green light ,please plug the charger again).
4) Charge the receiver for about two hour for the first charge or
until the light indicates charging complete.
4. To turn the Receiver Collar on
Press the power button once, the blue light will flash
5. To turn the Receiver Collar off
Press the On/Off Button until the blue light is gone, it means the
receiver is turned off.
7. How to use the Test Light
1) Turn the Receiver Collar on.
2) Hold the Test Light Contacts to the Contact Points.
3) Press the SHOCK Button on the Remote Transmitter.
4) The Test Light will flash.
Note: At higher Stimulation Levels, the Test Light will flash
brighter.
5) Turn the Receiver Collar off.
Save the Test Light for future testing.
Note: If the Test Light does not flash, recharge the Receiver
and re-test.
6.Connect transmitter and receiver
1) With the Receiver Collar off your pet, turn on the receiver
collar.
2)Press the power button of the receiver continuously for three
times, and the red light will always on.
3) Press the TONE, VIBRA or Static Stimulation(any of them) on
remote, the blue light on receiver will flash, it indicates pairing is
completed.
4) Press the TONE button, the receiver receives the command
and makes a sound.
5) If the pairing were not successful, please repeat the 1-3 steps.
6) To match the second receiver, press the "A B"button and
select for the second receiver and follow the same procedure.
Two Dog System
NOTE: If you wish to add another Receiver Collar to the training
system, extra Receiver Collars are available where you bought
your unit.
5.How to Connect transmitter
and receiver
Note:
1)If the pairing were not successful, please repeat the 1
-4 steps.
2) To match the second receiver, press the "A B"button
and select for the second receiver and follow the same
procedure.
3)If you wish to add another Receiver Collar to the
training system, extra Receiver Collars are available
where you bought your unit.
1.Turn on the transmitter
2.Turn on the receiver
3. press the power button once.
Test Light
4.Press the TONE, VIBRA or Static Stimulation(any of them)
on remote, the blue light on receiver will flash, it indicates
pairing is completed.
-5- -6-

6.Important Notice
7.Summary of Frequently Asked
Questions
1. The display of transmitter stays on for approximate 6 seconds
after a button press.After 6 seconds with no button press,the
blue backlight shuts off first, and if no button press with another
50 seconds,the display shuts off and the transmitter goes into
sleel mode with atuto-vibration,pressing any button with auto-
vibration will turn the display back on.
2.The receiver will be into shallow sleep mode if stop working for
5 seconds,and if without any operation for 50 seconds,it will be
into deep sleep mode, Any commands from the transmitter will
activate the receiver.
3.Press"A B"button for selection. Channel A controls the first
receiver and Channel B controls the second receiver. Channel
A B controls both the two receiver.
4. The design of the receiver is rainproof. The rubber cover
has to be put in the right position to ensure rainproof effect.
5. Test static stimulation function
1) Place the Test bulb to the metal screws (ensure the mental
points are attached when test the stimulation function).
2) Press the “Static Stimulation" button, and the LED light will
flash on.
6. How to find the bestVibration/Stimulation Level?
The level of Vibration/Stimulation best suited for your dog
depends on your dog's temperament and threshold for
Vibration/Stimulation. Always start at the lowest level and work
your way up.The appropriate level can be found when the dog
responds to the Vibration/Stimulation with a mild reaction, such
as a tensing of the neck muscles. The Vibration /Stimulation
Level may vary depending on the training situation. When
highly distracted, dogs will require a higher level of
Vibration/Stimulation
Is the Vibration/Stimulationsafe for my pet?
While the Vibration/Stimulation is unpleasant, it is
harmless to your pet. Electronic training devices
require interaction and training from the owner to
achieve desired results.
Q
A
How old does my pet have to be before using the
Remote Training Collar?
Your pet should be able to recognizebasic
obedience commands such as “Sit” or “Stay”.
Pets should be at least 6 months old before using
the Training Collar.
Q
A
Once my pet is trained and has been obeying my
commands,will he have to continue to wear the
Receiver Collar?
Probably not. You may need to reinforce training
with the Receiver Collar from time to time.
Q
A
Is the Receiver Collar waterproof?
It's water resistant/rainproof. Be sure to keep the
rubber cover put in the right position and do not
make the dog swim in water.
Q
A
How long can I continuously deliver Vibration/
Stimulation to my pet?
The maximum amount of time you can press the
Stimulation Button and deliver Stimulation to your
pet continuously is 5 seconds. And the maximum
amount of time you can press the Vibration Button
and deliver Vibration to your pet continuously is
10 seconds After this, Vibration/Stimulation cannot
be delivered until You release and press the
button again.
Q
A
How long should I process my training session for
my pet?
Training sessions should be kept positive and
short ,it is better for about 10-15 minutes each
time.
Q
A
8.FCC Compliance
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
-7- -8-

equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
-Caution: Any changes or modifications to this unit not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
9.Declaration of Conformity:
Disposal:Disposing of packaging Dispose of the
packaging according to type:
• Cardboard and carton to waste paper
• Foils in the recycling collection
Disposing of the device Applicable in the European
Union and other European countries with systems
for separate collection of recyclable materials.
Old devices must not be disposed of in household
waste! If the Modular Remote Trainer can no longer
be used, all consu-mers are required by law to hand
over the old devices separate from household
waste, for example, at a collection point of their
local community/district. This ensures that the old
appliances are properly recycled and that negative
effects on the environ-ment are avoided. That is
why electrical devices are marked with the symbol
shown here
Declaration of conformity (see chapter „Declaration
of conformity“): Products designated with this
symbol fulfill all applicable community provisions of
the European Economic Area.
This symbol certifies that the device’s
electromagnetic interference is below the limit
approved by the United States Federal
Communications Commission.
Reference Size for Different Dogs
Size Neck(In) Chest Measurement
(cm)
Back
Lenght
(cm) Type
Mini 20-22 25-30 19
23
28
31
35
40
60
29-36
35-42
41-47
46-53
52-59
76-84
20-24
23-28
27-31
30-34
33-37
43-48
Small
Medium
Large
Large
Large
Huge
Chihuahua,Yorkshire
Terrier
Chihuahua,Yorkshire
Terrier,Poodle,
Pomeranian
Maltese Dog,
Shih Tzu
Miniature Schnauzer,
Pekingese
Schnauzer,English
Cocker Spaniel
Beagle
Husky
Reference Weight for Dogs
Large Dog (Body height above 24 inch, Weight above 88 lbs)
Medium Dog (Height 16-24 inch,Weight 24.2-66 Ibs)
Small Dog (Height 10-16 inch,Weight 8.8-22 Ibs)
Mini Dog (Height under 10 inch,Weight under 8.8 Ibs)
10.Declaration:
The following tips will show you how to get the best
performance out of your Dog Training Collar.
(1) Make training sessions short and positive (about 10-15
minutes for each session.) This will enable the dog to
focuse on the trainer.
(2) Training one dog each time is recommended.
(3) During the first initial training sessions, keep the dog in a
familiar outdoor environment. Training in a place that the dog is
not familiar with may make the dog become distracted.
(4) Use a long leash fastened to a non-metallic collar to help the
dog to learn.Ensure that the additional collar and lash does
not interfere with the Contact Points of the Collar Receiver. Do
not use the remote training collar without a long leash
unless your dog is fully trained.
(5) More success will occur by teaching the dog a command
first before trying to reinforce the command with the Remote
Transmitter.
(6) For basic obedience training, vibration is more useful.
(7) Issue one obedience command each time, this will reduce
confusion and allow the dog to remain focused. Do not use
the training system for commands that the dog has not
learned.
-9- -10-

(8) During training, look for all the positive changes in the dog's
behavior and remember to encourage it promptly with ample
praise and reward.
(9) Avoid over-correcting your dog. Use as less remote
correction as possible during the training process.
(10) When the dog has become apparently perplexed, shift the
focus of the training by drawing the dog's attention to a
command they have been familiar with.
Example: Tell the dog to sit and give abundant praise and
encouragement on successful completion of the sit
command.
(11) Do not use the training system to correct or eliminate
aggressive or biting behavior. When the dog is
showing signs of aggressive behavior, contact a professional
dog trainer in your local area immediately.
(12) Please keep in mind that training sessions should be kept
short. Stop Training and play with the dog when the dog
has made progress.
-11-