Petlibro Dockstream PLWF005 User manual

Before using the product, please read this
manual thoroughly and retain it for future reference.
USER MANUAL
Dockstream Automatic Pet Water Fountain
www.petlibro.com
Model: PLWF005
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Model: PLWF005
©Libro Corp. All Rights Reserved.
Manufacturer: Shenzhen Libro Technology Co., Ltd.
Address: 12/F, Tower B, GALAXY WORLD, Yabao Road,
Longgang District, Shenzhen, China
JP Importer: 株式会社神州Made in China
PETLIBRO
Dockstream Automatic Pet Water Fountain
CAN ICES-3 (B)/NMB-3(B)PLWF005_V1.0

SAFETY PRECAUTIONS
WARRANTY
PRODUCT OVERVIEW
HOW TO USE
CARE INSTRUCTIONS
TROUBLESHOOTING
SPECIFICATIONS
CONTENTS
01
04
05
07
10
11
12

SAFETY PRECAUTIONS
• Dispose of all packaging materials properly. Keep the
polybags away from children and pets as these bags
could cause suffocation.
• Do NOT allow children to play with, in or around the pet
water fountain.
• To avoid injury, please keep close supervision when the
appliance is used near children.
• Do NOT use the water fountain with pets not able to
reach the water tray or with any physical disability.
• Do NOT place any foreign object in the water tank.
• Do NOT disassemble the pet fountain other than com-
ponents as instructed in this User Manual.
• Do NOT use the pet fountain for anything other than its
intended use.
• Only use attachments recommended or sold by the
manufacturer. The use of attachments not recommend-
ed or sold by the manufacturer may cause an unsafe
condition. Do NOT modify the pet fountain.
• Do NOT operate any appliance if the unit is malfunc-
tioning or has been damaged. Do not attempt repairs
on the device yourself. Contact our customer service
immediately for further instructions.
• Be sure to disconnect the power supply for safety when
the appliance is not in use.
• Please disconnect the power supply before maintaining
and cleaning the machine.
• Always unplug the appliance when not in use; or before
putting on or taking off parts and before cleaning.
• The power adapter and wire plug must not be flooded
during cleaning.
• This product is for indoor use only.
• Do NOT allow pets to chew on or swallow any parts. If
you are concerned about the power cord, purchase a
cord conduit (a hard-plastic protector) at any hardware
store to protect the power cord.
• If an extension cord is necessary, one unit with a proper
rating should be used.
• Do NOT install or store the pet water fountain where it
will be exposed to weather or temperatures below 0°C /
40°F.
• Read and observe all important notices listed on the pet
water fountain and in the packaging.
CAUTION
! Warning
• This product is not allowed to run without water.
• Never pull the electrical power cord to remove the plug
from the wall outlet.
• If the plug of this device gets wet, turn off the electricity
of that wall outlet. Do NOT attempt to unplug.
• Check the device after installation. Do NOT plug in if
there is water on the contact points or plug.
• To avoid tripping, always position the power cord out of
the way of foot traffic.
• Do not use the appliance in the bathroom.
• Replace the filter at least once every 2 weeks or when
the flow rate has noticeably reduced. For two or more
cats, you may need to replace the filters more regularly
if it becomes blocked.
• Do not put any parts of the whole machine into the dish-
washer, otherwise, there is a risk of deformation.
01 02

This device complies with Part 15 of the FCC Rules. Oper-
ation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired opera-
tion.
Changes or modifications to this unit not expressly
approved by the party responsible for compliance could
void the user’ s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-
cian for help.
This device and its antenna(s) must not be co-located or
operation in conjunction with any other antenna or trans-
mitter.
Radiation Exposure Statement
WARRANTY
• 1-year warranty
• Lifetime support
For guidance on product use and warranty extension,
please contact our brand after-sales staff via email:
[email protected]
If any questions related to orders, please contact the seller
through the shopping platform.
03 04
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be coÿlocated or operating in conjunction with any other
antenna or transmitter. During the operation of device a distance of 15 cm surrounding the
device and 20 cm above the top surface of the device must be respected.

1
PRODUCT OVERVIEW
3
4
5
2
6. Water Pipe
7. Foam Filter
8. Wireless Water Pump
9. Snap Lids
05 06
1. Spout
2. Filter Lid
3. Filter
Components 9 and 10 are integrated and cannot be
detachable.
11
12
13
9
6
8
10
7
10. Water Tank
11. Power Cord
12. Power Adapter
13. Tank Base
4. Water Tray
5. Filter Tray
Components 4 and 5 are integrated and cannot be
detachable.

5. Install the soaked filter.
4. Install the water tray and fasten the snap lids.
Note: Pass the water pipe through the hole of the
water tray, and the snap lids of the water tray need to
be fastened, otherwise it will loosen.
2. Insert the foam filter into the groove of the water
pump. Position the pump according to the bottom slot
shape.
Note: Please pay attention to aligning the recessed
part of the pump with the protruding part of the water
tank, otherwise the pump cannot be installed firmly.
HOW TO USE
1. Soak the filter in a clean bowl for 5 minutes, then rinse
the filter thoroughly with tap water.
Notes:
1)The filter must be fully soaked before the fountain is
turned on; otherwise, the water may not flow through
the filter smoothly and cause spillage.
2)Do not soak the filter in the water tank of the
fountain in case of any surface dust.
3. Install the silicone pipe on the pump. Add water to the
tank.
07 08
Note: Use the small handle to install the filter and keep
this small handle on the outside for easy replacement
in the future. Please make sure the hole of the water
pipe passes through the hole of the filter.

6. Insatll the filter lid. Whether to install the spout
depends on your pet's drinking preference. CARE INSTRUCTIONS
2. Remove the impeller by the brush hook.
1. Remove the foam filter, pump cover and impeller cover
in sequence.
Note:
The foam filter affects the water yield very much, so
please clean it frequently and replace it in time when
cleaning the pump.
How to clean the pump
8. Install the water tank with the tank base by aligning
the protruding hole of the water tank with the tank base.
7. Connect the power adapter.
1. Replace the filter and the foam filter at least once every 2
weeks.
2. Clean the pump and fountain at lease once every 2
weeks.
09 10
Fitted
with Spout
Not Fitted
with Spout
1
2
The Bottom
Of The Tank
Tank Base

TROUBLESHOOTING
SPECIFICATIONS
3. Use the brush to clean the parts with water.
Tip: The brush can also be used to clean the spout.
Recommended to clean the spout every 2 weeks.
Problem Solution
11 12
Water keeps spilling
out of the water tray. The filter may not be fully soaked. Please soak the filter in a clean bowl
(not in the water tank) for 5 minutes
before the first use.
The pump stops
working. 1) Fill in water between MIN and MAX. The pump will fail if it runs dry.
2) Clean the pump, water tank, and
drinking basin.
3) If the above solutions don’t work,
please contact us at
[email protected]
How often should I
change the filters?
Where to get them?
Please replace the filter at lease once
every 2 weeks.[email protected]
to purchase new filters.
Why do I need to soak
the filter before first
use?
The filters absorb more water (and
therefore clean more water) when
they're wet and expanded. Soaking
the filter removes particulate matter
that may have settled on the filter.
Water output speed
slows down. 1) For the first use (or reuse after long-time storage), the water pump
needs to discharge air, it's normal if
the water output speed slows down.
Problem Solution
Water output speed
slows down.
No water after
installation This product adopts a wireless pump, and the power supply mode of the
water pump is induction power
supply. Please ensure that the power
supply is connected, the water tank
and base are installed correctly, and
the water pump and water tank are
installed correctly. Please refer to the
“How to Use” section of the manual.
Black residues and dirt
appear in the water
tank and on the filter
element
1) Please ensure that clean water
sources are replaced regularly.
2) Please make sure to soak and wash
the filter element in advance.
2) It is dirt in the pump, please refer to
"How to Clean the Pump" in the
manual to clean it.
Model
Power Adapter
Material
Water Tank Capacity
Dimensions
Net Weight
PLWF005
Input: 100-240V 50/60Hz
Output: 5V/1A
ABS
2.5 L
232x177x161 mm / 9.1x7x6.3 inch