Petlibro PLAF203 User manual

PETLIBRO Granary Automatic Pet Feeder -
Camera Monitoring 5L Double Food Tray
Model: PLAF203
©Libro Corp. All Rights Reserved.
Manufacturer: Shenzhen Libro Technology Co., Ltd.
Address: Building 3, Cloud Park, Shenzhen, China, 518129
CAN ICES-3 (B)/NMB-3(B)
FCC ID:2A3DE-PLAF203
Made in China
PLAF203_V1.0
Scan for more details
www.petlibro.com Granary Automatic Pet Feeder -
Camera Monitoring 5L Double Food Tray
Model: PLAF203
Read this manual before using the product, and keep it
for future reference.
This product is intended for household use only.
User Manual
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

SAFETY GUIDELINES
! WARNING
Dispose of all packaging materials properly. Some items may
be packed in plastic bags; these bags could cause suocation;
keep away from children and pets.
Do NOT allow small children to play with, in or around the pet
feeder.
To reduce the risk of injury, please keep close supervision when
the appliance is used near children.
Do NOT use the feeder with pets not able to reach the food tray
or with any physical disability.
Do NOT immerse the base part in water at any time as it may
damage electronic components like the control panel.
Do NOT place any foreign object in the pet feeder.
Do NOT use outdoors.
Check operation frequently to be sure the unit is dispensing
properly.
Do NOT use wet, canned or moist food.
Do NOT disassemble the unit other than as instructed in this
User Guide.
Do NOT use the feeder for anything other than its intended use.
Only use attachments recommended or sold by the manufac-
turer. The use of attachments not recommended or sold by the
manufacturer may cause an unsafe condition. Do not modify
the pet feeder.
Do not operate any appliance if the unit is malfunctioning or
has been damaged. Do not attempt repairs on the pet feeder
yourself. Contact our customer service immediately for further
instructions.
Always unplug when not in use and before cleaning.
Never pull on the electrical power cord to remove the plug from
the wall outlet.
If the plug of this device gets wet, turn o the electricity to that
wall outlet. Do not attempt to unplug.
Examine the feeder after installation. Do not plug in if there is
water on the power cord or plug.
To avoid tripping, always position power cord out of the way of
foot trac.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SAFETY GUIDELINES
WARRANTY
IN THE BOX
PRODUCT OVERVIEW
BUTTONS AND INDICATORS OVERVIEW
SET UP THE FEEDER
CONTROLLING VIA APP
CLEAN AND CARE
SPECIFICATIONS
TROUBLESHOOTING
01
03
04
05
07
09
17
34
39
39
Contents
01

02 03
CAUTION
Do NOT install or store the pet feeder where it will be exposed
to weather or temperatures below 4°C / 39.2°F.
Use alkaline D batteries to power. Do NOT use rechargeable
batteries.
Check the batteries regularly. Before leaving for extended time,
always replace batteries with new ones.
Do NOT lift the pet feeder by lid, food tank, or food tray. Lift and
carry it using both hands and the base, while keeping the unit
in an upright position.
Suitable for dry food ONLY, with kibble size ranging from
2-15mm / 0.07-0.6 inch in diameter. Larger kibble may get stuck
at the food outlet.
Do not put your ngers into the food outlet or let your ngers
touch the rotor.
Read and observe all important notices listed on the pet feeder
and in the packaging.
•
•
•
•
•
•
•
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modications to this unit not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
WARRANTY
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This
equipment should be installed and operated with minimum
distance of 20cm from your body.
• 1-year warranty
• Lifetime support
For guidance on product use and warranty extension, please
contact our brand after-sales sta via email:
[email protected].
If any questions related to orders, please contact the seller through
the shopping platform.

04 05
IN THE BOX PRODUCT OVERVIEW
1 X Automatic Pet Feeder
1 X Power Adapter 1 X Desiccant Bag
1 X User Guide Kit
1 X Double Food Bowls
with Holder
1 X Meal Splitter
1. Lid
2. Seal Strip
3. Food Tank
4. Transparent Window
5. Tank Base
6. Anti-Clog Detector
7. Camera
8. Infrared Light
9. Control Panel
10. Display Panel
11. Food Outlet
12. Feeder Base
13. Meal Splitter
14. Stainless Steel Bowls
1
5
14
10
9
7
8
11
12
2
3
4
6
13

06 07
BUTTONS AND INDICATORS OVERVIEW
15. Desiccant Box
16. Power Jack
17. Power Adaptor
18. Battery Compartment
19. TF card slot
20. Compartment Lid
21. Speaker
Buttons Overview
Unlocked Button
To unlock the control
panel, press and hold the
button for 5 seconds, the
device emits a Di, DiDi
sound.
Manual Feeding Button
In the unlocked state, press
once to dispense 1 portion
of food.
16
15
18
21
17
20
Record Button
In the unlocked state,
press and hold the button,
start recording after a
beep is heard.
Record your message
(Max:10 seconds). Release
the button if you nish
recording, two beeps will
be heard indicating it’s
saved.
Reset Button
In the unlocked state,
keep holding the reset
button until the feeder
emits beeps: Di, DiDi,
the WiFi indicator
keeps ashing, it
indicates the device is
ready for re-connec-
tion.
19

SET UP THE FEEDER
Assembly and Prepare for Setting
Indicators Overview
Lock indicator
On if the control panel is locked.
O if the control panel is unlocked.
Note: The control buttons will be locked automatically after
30 seconds of standby.
Food level indicator
Light up red if the food level is low.
O if the tank has enough food.
WiFi Indicator
Work Status Indicator
Flash every one
second
Stay Solid
The feeder is ready to connect with
APP.
O
Connected to WiFi.
Not connected to WiFi.
Camera indicator
On
O
Food blockage or the motor can’t work.
Everything is working well.
08 09
1. Insert the TF (Micro SD) card (Card NOT included)
1) Open the battery compartment, the TF card slot is in the
middle of the battery compartment.
2) Insert the TF card in the direction shown. Slide it in until it
clicks into place.
Do not force or apply excess force when inserting the TF card.
Note: Insert the TF card
correctly. Not doing so can
cause a malfunction.
1 2
To enable the video recording function, insert a TF card rst,
then enable the Local Recording option in the APP: tap
icon in the upper right corner→Storage Settings→Local
Recording.
Light up when the Camera page in the App is in use.
Exit the camera page, the camera indicator goes out.

10 11
To remove the TF (Micro SD) Card, push in the TF card lightly.
For privacy, the video les in the TF card can only be checked
through the Replay section in the APP, and can not be read by
PC/phone.
Notes:
•
•
2. Connect Power
1) Plug the 5V power adapter into a power socket and the USB cable
into the USB port on the back of the feeder.
2) The LED display will light up automatically to indicate the feeder
is on.
3) Open the battery compartment at the bottom of the feeder.
Install three alkaline D batteries (not included) in case of a power
outage. Make sure the batteries match the positive and negative
poles with the markings in the compartment.
Notes：
•
•
•
Batteries are not included.
To avoid sudden power outage and the feeding of your pet is
aected, do not use the batteries as the only source to power
the feeder, the batteries can only be used as an emergency plan.
To avoid battery leakage, remove the batteries if the device
won’t be in use for a period of time.
Bottom view
X 3

5. Add dry pet food to the food tank.
Notes：
•
•
•
To prevent uneven food dispensing, please add enough pet
food to the visible level.
Recommended kibble size: 2-15mm/0.07-0.6 inch in diameter.
Do not use canned, wet, or moist food.
Minimum Grain Level
15mm
6. Put the lid back on.
To snap into place, turn the lid clockwise from the right
rotating sign to the left rotating sign.
12 13
3.Twist anticlockwise to open the lid.
4. Place the desiccant bag into the inner box under the lid.
Notes:
•
•
It is recommended to change the desiccant bag every 15
days to prevent mold growth.
Remove the desiccant bag before cleaning the lid.

14 15
8.Install the meal splitter by aligning it with the round
hole.
7. Take out and install the double food tray.
Attach the double food tray to the notch underneath the
feeder base.
Left = Right
1) To get equal amount of food, move the splitter to the
right until it can't move.
2) To get uneven amount of food, move the splitter to the
left, more food will be dispensed to the right bowl.
Left Right

16 17
CONTROLLING VIA APP
*Note: The feeder supports 2.4GHz and 5GHz WiFi .
System Requirements
Install the APP & Log in
1. Search “PETLIBRO LITE” in App Store or Google Play to
download the App.
2. Sign up and log into your account.
iPhone on iOS 10.0 or later; smartphone on Android 5.0 or later
1) Open the App, select Home page, tap "Add Device" or "+" in
the upper right corner.
Add the Device
A. Add the Feeder Via Bluetooth Mode
If there is grain in the food bowl, handle it gently to avoid spilling.
Hold the base instead of any other parts when lifting the feeder.
Note: To remove the bowl holder from the feeder base, move
the meal splitter away from the food outlet.