Petree ACC-18-01 User manual

Please read the instructions carefully before using the product, and keep them after reading
Operation guide
Fully automatic
cat litter box
Hangzhou Beiqu Technology Co., Ltd.
1
2
3
4
5
6
7
41 Motor chassis (not washable）
46 Data display screen 4
2Spherical plastics hood(washable)
4
7Multifunctional button
7
3Patent separation structure
4Sand removal pedal
7
5Posterior closed deodorization litter can
Product components
SLEEP
STOP
The machine goes into standby state and stops working.
Automatically return back to normal operation mode after
10 hours.You can quit sleep mode manually in instant as well.
WAIT
GO
Functional mode
Sleep mode:
When the machine is running, you can press the
multifunctional button to stop operation immediately.
Emergency braking:
When the machine is activated with the cat in it, it will goes
to wait mode. Machine will go into operation after the cat
leaves. If the cat stays in the box for a very short time, wait
mode won’t be activated, and the machine won’t go into
operation after the cat leaves.
Wait mode:
In this mode, the cat litter box will start rotating to cleaning
procedures. Under this mode, when the cat enters or
touches, the machine will immediately enter emergency
braking mode. After the cat leaves, it will continue to
complete the procedures.
Operation mode:
Important safeguards
Product specifications
5. Do not put the machine in direct or close contact with heat to prevent damage to
machine components.
2. Do not stack items on the machine in order to avoid interfering with data
measurement and prevent damage to machine components.
1. Place the machine on a stable and open ground to avoid vibration or interference
of data measurement.
3.Do not place the machine at a humid environment and avoid placing it directly
under water to prevent damage to electronic components.
4. Do not place the machine on a soft surface (carpet for example) to avoid interfering
with data measurement.
6. Use spherical bentonite cat litter.
8. When wast is dumped from the litter can, please install the litter can in place.
7. Please lift and move the product with both hands. Do not drag it on flat surface.
9. For the safety of the cats, please only use it for cats that are at least three-month
old, and weighs over 1.5 Kg.
Product model
Appearance size
Rated voltage
Product material
Minimum accuracy
Noise
Product weight
Rated power
Maximum range
Maximum cat litter
ACC-18-01
624×587×537mm
100-220V
PP plastic
0.01Kg
≤50dB（A）
7.5Kg
5W
20Kg
4Kg

Operation guide
Power outlets is located under trash can,
use adapter to connect to household power supplies.
12V1A Safety Voltage, keep pets away to avoid electricity shock.
100-220V~50/60Hz 0.35A
12.0V --- 1.0A
Connecting to power supply
2
Pull up to open the rear trash bin to install garbage bags
Trash bags
Normal size of trash bags are applicable, make it more convenient to replace.
Pull out the trash can and take out the trash bag in one step, easy to dump.
Cat litter
3
SLEEP Press the multifunctional button, the screen will show
SLEEP, add litter when the machine is in sleep mode.
Note: When adding littler without machine entering sleep mode, the machine will
mistakenly taken into cat’s weight, and cause malfunction to the litter box.
Follow instruction of maximum litter line label, best
add litter to the maximun line.
After adding proper amount of cat litter, press the
multifunctional button, wait until the screen shows
GO, and the cat litter box rotates normally for two
cycles.
Attention: Failure to add cat litter according to the prescribed instructions will
cause cat litter spill out of the box or other malfunction during operation.
Note: Exit sleep mode with button, the screen will show GO and the box will
start rotating instantly.
MAX
最高加砂线
GO
Real-time data will show on
the screen when the cat enter
into the box.
0.00kg
When the cat stay in the box
for a certain period of time,
machine will take it as an
effective excretion, and enter
into standby mode.
WAIT
After the cat is excreted, the
machine starts running in 30
seconds to ensure effective
separation of waste and litter,
so that waste can be easily
shoveled out.
GO
Use of equipment
6 4
Cleaning and maintenance
2
3
Draw out the trash can
horizontally with the handle
under the trash can.
Press the buttons on both
sides to remove the shell
and the back deodorizer cover.
Unscrew the two long screws
of the roller to separate the
sphere from the base.
Before the cleaned parts are reinstalled back
to the base, please dry the water to prevent it entering the base.
washable
Do not wash