Petree ACC-21-02 User manual

Distribution network precautions
1. The litter box only supports 2.4G WiFi, not 5G WiFi
2. The mobile phone needs to turn on Bluetooth when
configuring the network
3. If the APP cannot find the device, please power off
the device for 5 seconds and then restart it
4. Only one account can be added to a device, and the
device can be shared with other users in the APP
5. If the power is interrupted during operation, it will
automatically return to the horizontal position after power on
7. Distribution network
Scan the code to download the APP, press and hold the host
button, and enter the network configuration state after a long
beep (please place the device in a WiFi coverage environment),
open the APP, follow the APP instructions to add the device and
connect to the network.
6. Add cat litter
Add clumping cat litter from the hole. Do not add
more cat litter than the MAX cat litter line. After adding
the litter, click the button on the main body and wait for
the end of the run to be used normally
5. Power on and wait for device self-test
Turn on the power and wait for the completion of the
self-check operation of the device (the white light is
always on after the self-check is completed).
Put the ball compartment back on the base, close the lock
ball and scribe, and finally put on the outer cover.
3. Install the ball compartment, install the outer cover
Installation Instructions
1. Take the outer cover, take the ball compartment
Take out the main body, remove the cover, open the lock ball
and scribe, remove the ball compartment, and get the base.
Product Introduction
outer cover
ball room
pedal
buttons &
indicators
support leg
cat feces
container
base
Quick guide cardInstructionsTrash bagPower adapter
Support leg x 4
Cat feces containerMain body
Product List
Please carefully check the product list quantity
User Notice
Statement
Thank you for purchasing the Petree smart cat litter box.
Beiqu Technology is committed to making your pet life better
through the power of design.
This instruction will help you better understand and
use this product.
Please read the operation manual carefully
and keep it properly before using the product
Instruction
Automatic Cat Litter Box
1. Please install and use this product according to the instructions
2. This device needs to be placed on a level ground
3. No items are allowed on the top of the device
4. Don’t use in a high temperature and high humidity environment
5. Don’t use non-clumping cat litter
6. Don’t place foreign objects in the ball room
7. Don’t force the cat into the ball room
8. The automatic mode of the device is not suitable
for cats younger than 6 months
9. The base part is forbidden to wash
2. Put the base diagonally and install the support legs
Place the base of the main body on the side and install
4 support legs, After the installation is complete.
4. Install trash bag & deodorant box
Take out the inner hoop of the cat feces container,
install the deodorizing box (purchased separately), and
return it after putting the garbage bag in the cat feces
container to ensure that the garbage bag is not
excessively upturned, then put it back into the main body
Scan code to
download APP

Non warranty description
Those including but not limited to the following circumstances
are not within the scope of three guarantees
1. It has exceeded the validity period of the Guarantees service
2. Dismantle the machine without permission
3. Damage caused by human or irresistible factors
4. Damage caused by failure to use or maintain in accordance
with the requirements of this manual
5. Aging during normal use of the product
6. Accessories and gifts
Warranty
1. When the customer purchases the machine, the warranty
card is attached to the manual,which shall be properly kept as
the warranty certificate after being filled in by the user
2. If the product has quality problems within 12 months from
the date of purchase, it shall be approved by the company After
verification, consumers enjoy free maintenance service
(except power adapter)
After-sale service
Name: Automatic Cat Litter Box
N.W.: 10KG
Type: ACC-21-02/ACC-21-03
Product Size: 520 x 520 x 640 (mm)
Standard: GB4706.1-2005
Company: Hangzhou Beiqu Technology Co., Ltd
Address: 1-306 Jinsha Lake Commercial Center,
Qiantang New District,Hangzhou,Zhejiang
Wi-Fi frequency range: 2.400~2.4835GHz
Maximum Wi-Fi transmit power: 18dBm
Rated voltage: 12V 1A
Product Parameters
Description of hazardous substances
3. The red light of the machine is always on,
and the cleaning program cannot be started
Check whether the trash box is full.
2. The machine stops suddenly during operation,
and the red light flashes
The machine senses the entry of objects into and starts
the pause program. After the delay, it will resume operation.
(when the agglomerate is too large or the rolling speed is too fast,
it may also trigger the stop)
1. Shortly after turn on, the "drip sound" of the equipment
will sound for a short time and flash with the red light
Try to readjust the position of the cover.
Quick troubleshooting
3. Dry and Assemble
After the cleaning is completed and the machine is dried,
install the ball room, cover and cat feces container in turn
If the red light flashes after the installation is powered on,
check whether the cover is installed in place
2. Disassembly and Cleaning
Take down the cat feces container, take down the cover, open
the ball room scribe and take down the ball room
1. Remove residual litter
Double click the host button (or click the "sand dumping" button
on the app) to start the sand dumping function
(too much residual sand may trigger the prompt that the toilet bin is full.
Shaking the toilet bin can reduce the risk of cat litter scattering)
Cleaning Instruction
Washable Non Washable
8. How often does it take to clean the ball room？
It can be determined according to the specific use conditions
(number of cats or defecation status of cats, etc.)
it’s recommended to wash once every 1~3 months if it’s possible
7. How often does it take to clean the cat feces container？
It can be determined according to the specific use situation
(factors such as the number of cats)
It’s recommended to replace it once every 3~5 days
in the case of one cat
(the frequency needs to be increased in hot weather)
6. When should I replenish cat litter？
It can be determined according to the specific use situation.
It’s recommended to supplement cat litter when
the remaining half of the cat litter is used
5. How much cat litter should I add？
It’s recommended to add about 4L cat litter for the first time.
Do not exceed the max sand level line. Excess sand will be
filtered into the cat feces container during operation
4. What types of cat litter can I use?
This product supports most agglomerated cat litter
(tofu sand, mixed sand, etc.)
Do not use non agglomerated or poorly agglomerated sand
(crystal sand, wood-based sand, etc.)
3. Is it dangerous for cats to enter when the ball rotates？
If a cat enters the ball bin when it rotates, the monitoring sensor
will be triggered immediately, the ball room will stop rotating
immediately, and the equipment will continue to operate after
the cat leaves the ball room for a period of time. Therefore, there
is no need to worry that the cat will enter the running ball room
2. What if the cat doesn't want to use the new litter box？
If the cat has strong vigilance, can place machine next to
the old litter box for a period of time, and put some old litter
with the smell of the cat into the new equipment. The familiar
smell will also make the cat more easy to adapt
1. How old cats can use the device？
The automatic function of this product is applicable to cats over
4 months old and weighing more than 1kg. If the cat's weight or
age does not meet the standard, do not use the automatic
excrement removal function. You can choose to turn on the
device in the do not disturb mode for 24 hours and manually
turn on the excrement removal function
Common problems and Solutions
2. Device information push function
When the machine is connected to WiFi and added to the app
the current status information of the machine will be pushed
to the app in real time.
4. Smart deodorizing function
Smart deodorization is always on by default under normal
conditions, In the "mode" button of app,
the "automatic deodorization" function can be turned off
5. Do not disturb mode function
Click the "do not disturb mode" button in the app,
and the equipment will enter the mode
at the corresponding time every day without any operation
3. Dumping cat litter function
Double click the host button or click the sand dumping button
on the app,If the cat enters during operation, the equipment
will stop and continue torun after the cat leaves
1. Automatic cleaning function
After the cat leaves the toilet, the machine starts cleaning
3 minutes later. If the cat enters during operation, the machine
will stops and continues to operate after the cat leaves
Function Description
white
light
slow flashing
slow flashing
fast flashing
breathing changes
always on
always on
red
light
triggered the sensor
paired network mode or
program upgrading
cleaning mode or
sand dumping mode is running
turn on do not disturb
standby state
the cover is not placed
cat feces container full
main
body
button
single press
start/pause/continue clean function
empty litter function
dumping cat litter function
pause/continue
start up
running status cancel the running function
enter the distribution mode
standby state
double press
long press
for 3 seconds
indicator
light
Button and light description
4. During sand dumping, the machine stops and
the red light is always on
If the amount of residual sand is too large, resulting in the
trash box full, shake the cat feces container back and forth
to smooth the residual sand or dump it twice
(it needs to be started manually after stopping, so there is no need
to worry about dumping the remaining cat litter automatically)
○: Indicates that the content of the hazardous substance in all homogeneous materials of the
component is below the limit specified in GB / T 26572.
×: Indicates that the content of the hazardous substance in at least one homogeneous
material of the component exceeds the limit specified in GB / T 26572.
Part Pb
○
×
×
×
×
○
○
○
○
○
○
○
○
×
×
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Hg Cd Cr(VI） PBB PBDE
Cover
PCBA
Wire
Metal
Adapter
Hazardous substances