PETTADORE Hydrate Upgrade User manual

User Manual
Please read this manual carefully before using.
Keep the manual in a safe place for future reference.
Hydrate Upgrade
For other languages see
pettadore.com/pages/manuals

01 / Notice
For other languages see
pettadore.com/pages/manuals
!!
1. Please read the manual carefully before use.
2. Children must use the unit under the guidance
of an adult.
3. Do not look directly at or touch the UVC lamp
while the device is sterilizing.
4. When cleaning the fountain or the tank, please
disconnect the power supply and take the
warmer out.
5. After some period of use, scale deposits may
appear on the warming bar, this is normal.
6. The warmer doesn’t warm the water over 28°C.
7. As UVC ultraviolet light cannot penetrate plastic
or clothing, the visible light source that is
 exposedbytheUVtubedoesnotinictdamage.
8. After a long period of use, yellowing inside the
fountain is normal.

02 / Meet your Hydrate Upgrade
UV
Warming
Indicator
LED
Controller
UVC Lamp
Indicator
LED
Thermometer
Probe
Warming Module
UVC Lamp
Warming
Bar
For other languages see
pettadore.com/pages/manuals
!!

03 / Operations
1. Lift the reservoir lid and put the cable in the
reserved outlet hole. Put the lid back and slide
the controller over the edge of the tank.
2. Connect the power cord to the adapter.
*Unit needs an
independent
power supply!
For other languages see
pettadore.com/pages/manuals
!!

04/ Specications
Pettadore, Vasteland 78 unit A2.14
3011BN Rotterdam, the Netherlands
Pettadore.com
Made in China
Model: FS030
Power Input: DC 12V 2A
Weight: 105g
Sterilization Media: UVC
Size: 99x35x28mm
Warming: up to 28C°
Applicable Fountain: FSL020 / FSW030
Contents: 1x Warming & Sterlizing Unit, 1x
12V 2A Power Adapter
For other languages see
pettadore.com/pages/manuals
!!