Phil & Teds ISOFIX CLASS E User manual

I
N
S
T
R
U
C
T
I
O
N
S
-
I
N
S
T
R
U
C
T
I
E
S
-
I
N
S
T
R
U
C
C
I
O
N
E
S
-
G
E
R
B
R
A
U
C
H
S
A
N
W
E
I
S
U
N
G
-
I
N
S
T
R
U
K
S
J
O
N
E
R
-
I
N
S
T
R
U
K
T
I
O
N
E
R
READ
KEEP FOR FUTURE REFERENCE
FOR YOUR CHILD'S SAFETY
THESE INSTRUCTIONS
BEFORE USE
CAREFULLY
ISOFIX CLASS E
protect™
alpha™

Congratulations on choosing
your new car seat isox base!
Product Care
Safety Warnings
Features
Instructions
The ISOFIX CLASS E complies with requirements applicable in
market of sale. For rights & remedies, and important online product
registration please visit:
www.philandteds.com/register
www.mountainbuggy.com/register
mountainbuggy.com
philandteds.com
EN
3

Product care
Product care
IMPORTANT
CLEANING & CARING
Check your ISOFIX Base for cuts & bruises. If your
product is damaged in any way , or you’re not sure how
to use it, please consult our web support from where you
can access a local customer care team.
Caring for your ISOFIX Base
Unlike children, your ISOFIX Base likes to stay clean.
Cleaning:
• Wipe down with warm water.
• Dry thoroughly before storage.
• Store in a well ventilated space, away from direct
sunlight which could damage or fade your product.
• Store in a safe place when it is not being used. Avoid
placing heavy objects on top of it.
• DO NOT allow to come into contact with corrosive
substances e.g. battery acid.
GENERAL INSTRUCTIONS
Group 0+
Suitable for birth to 13kg.
ISOFIX CLASS E
THIS DOCUMENT CONTAINS
IMPORTANT INFORMATION AND MUST
BE KEPT WITH THE SEAT FOR FUTURE
REFERENCE.
This product should be used rearward facing until the
child is too large for the seat or exceeds 13kg.
This product should never be used forward facing.
Please read thoroughly before commencing
installation as an incorrect installation could be
dangerous.
1. This is a "Semi-Universal" ISOFIX BASE CHILD
RESTRAINT SYSTEM, it is approved to ECE
regulation 44.04. Please note that the ISOFIX
base is not suitable for all types of cars and
is designed as "Semi-universal" and therefore
suitable for installation on the seats of certain
cars as stated on the car tting list.
2. If in doubt, consult either phil&teds or the retailer.
Extreme Hazard
• Do not use in passenger seats equipped with
airbags.
EN
The correct use and maintenance of your ISOFIX Base
will ensure it gives long and trouble free use. When
somebody else is using your ISOFIX Base, ensure
that they also know how to use it and especially the
correct way to adjust it. The safety of your child is your
responsibility.
5

Safety Warnings Safety Warnings
WARNINGS
• PLEASE READ THOROUGHLY BEFORE
COMMENCING INSTALLATION AS INCORRECT
INSTALLATION COULD BE DANGEROUS.
• THIS ISOFIX BASE SHOULD NOT UNDER ANY
CIRCUMSTANCES BE USED ON A PASSENGER
SEAT EQUIPPED WITH AN AIRBAG.
• The Isox base is only suitable for installation on the
seats of certain cars – refer to the car’s tting list.
• Never buy or use a second hand ISOFIX base.
• Never use an ISOFIX base that has been in an
accident or become badly worn – replace the base.
After an accident, the base may not appear damaged
but it may not be able to protect your child in the
event of another accident. Periodically inspect the
base for wear and signs of damage.
• Always secure the Isox base to the vehicle’s Isox
points.
• All occupants in the vehicle must be correctly
restrained.
• Do not place any objects in the foot well in front of
the Isox base.
• Do not make any unauthorised modications or
alterations to the Isox base.
• Do not allow children to play with the Isox base.
• Do not place the Isox base on a table or work top.
• Make sure the Isox base does not become trapped
in the door of the vehicle or by a folding seat.
• Make sure folding seats are securely latched.
• Do not t the Isox base on a side or rear facing
vehicle seat.
• A car’s interior can become very hot if the vehicle is
left parked in direct sunlight. It is recommended that
the base and car seat is covered with a towel etc
when not in use. This prevents the base and car seat
EN
from becoming hot and burning the child.
• When not in use, store the Isox base in a safe, dry
place.
• Do not place the front support leg on a oor storage
compartment lid. The front support leg MUST make
full and rm contact with the vehicle oor.
• Make sure that the support leg does not raise the
base from the surface of the vehicle seat.
7

Features Features
01 Base
02 ISOFIX connector arms
03 ISOFIX connection indicator
04 ISOFIX adjustment button
05 Shell second lock release
button/indicator
06 Shell release handle/indicator
07 Support leg
08 Support leg adjuster
09 Support leg pressure
indicators
10 Plastic ISOFIX guides
2
87654321
1
4
3
7
6
5
9
8
10
EN
9

InstructionsInstructions
1 2 3 4 5 6 7 8
8 7 6 5 4 3 2 1
12345678
1
a
b
b
Installing the ISOFIX Base
WARNING: To install the ISOFIX CHILD RESTRAINT
SYSTEM read the instruction manual carefully as the
safety of your child is at stake. It is important that you
take the time to read these instructions carefully.
Check that the ISOFIX CHILD RESTRAINT SYSTEM
has been installed correctly.
• Insert the two plastic ISOFIX guides and hook them
onto the vehicle ISOFIX points.
The plastic guides can help identify the vehicle
ISOFIX points and make installation easier. They can
also help with the protection of your vehicle seat.
Pull out the support leg from the attachment.
Pinch the Adjustment Buttons(a) on each side of the
ISOFIX base and slide out the arms(b&c). ISOFIX
has 8 positions, which adjust the length.
• Connect the ISOFIX arms onto the vehicle
ISOFIX points.
Note: see picture 4, need to push the ISOFIX adjuster
button on both two sides. In order to make assembly
easier, we suggest to adjust the ISOFIX to the
longest position.
• Push the Adjust buttons toward the vehicle's anchors
until both connnectors are locked and the indicators
show green on both sides.
Push the base towards the seat back, making sure
the base is installed rmly against the seat back.
Note: the adjust buttons on both two sides must in the
same location
1
2
3
4
4
5
5
6
6
87654321
87654321
87654321
a
c
b
12
3
EN
11

InstructionsInstructions
Detaching the Car Seat from the ISOFIX Base
• Push the shell release button to the left, at the same
time pull the shell release button handle indicator,
then you can move out the shell.
Carefully lift the car seat from the ISOFIX Base.
Removing the ISOFIX Base from the vehicle
• Push the ISOFIX adjustment button, and the ISOFIX
connector arms will pop-up automatically, then the
base of ISOFIX can move out from the seat of car.
Pushing the support leg adjustment button to adjust
the front support leg to the required length. Reattach
to the holder position under the base. Carefully
remove the base from your vehicle.
12 3 4 567 8
87654321
a
b
a
b
12345678
678
• Push the support leg adjuster and adjust the support
leg so that it makes full and rm contact with the
vehicle oor. The two pressure monitors at the
base of the support leg must turn from red to green
conrming rm contact. Check that the front support
leg clicks into position and is correctly adjusted.
Lower the car seat on to the ISOFIX Base and make
sure that all 4 connection bars engage rmly and click
into position on the base connection points Make
sure the car seat handle is in the upright position and
that it “clicks” into place.
Lift the car seat to make sure that all four connections
have engaged correctly and the three connection
indicators have changed from red to green(parts list
no.5/6/9)
Do not place the front support leg on a oor storage compartment
lid. The front support leg MUST make full and rm contact with the
vehicle oor.
Make sure that the support leg does not raise the base from the
surface of the vehicle seat.
7
10
7 10
8
11
8 11
9
12
9
12
EN
13

Instructions Instructions
Do not use on
a passenger
seat with a front
airbag.
On outer rear seat YES
YES
NO
NO
NO
On a rearward-facing seat
On seats facing sidewards
On rear seat with lapbelt only
Front seat with airbag off
On centre rear seat NO
ISOFIX Base Vehicle Application List
Semi-Universal approved to ECE-R44.04 for use in the
vehicles listed in the vehicle application list.
INFORMATION
• Do not place the front support leg on a oor storage
compartment lid, the oor storage compartment lid
support leg must make full and rm contact with the
vehicle chassis.
• Please consult with the vehicle manufacturer
regarding access to ISOFIX points.
• Because of the vehicle seat position care must be
taken to correctly attach the child restraint system to
the ISOFIX points.
• Vehicle seat (mid row) must be adjusted forward.
• Adjust the vehicle seat so that the base front support
leg does not make contact with the oor storage
compartment.
• Vehicle seat has to be fully adjusted to the rear most
position.
• Ensure the resting angleis appropriate for the child.
• Although the car tting list advises to which vehicles
theISOxbasewill attach, not all models and makes
will be suitable. Therefore, there will be exceptions to
the rule and we advise that one should test the car
seat and base in the car to ensure a suitable t.
1*
2
5
3
6
47
*DO NOT USE ON A PASSENGER
SEAT WITH A FRONT AIRBAG
EN
15

Félicitations! Vous venez de
choisir la nouvelle base isox
de siège pour enfant.
Entretien du produit
Avertissements de sécurité
Caractéristiques
Notice
La base ISOFIX CLASSE E est conforme aux exigences
commerciales en vigueur dans le marché où le produit est vendu.
Pour connaître vos droits et vos recours et pour l'enregistrement en
ligne de votre produit, veuillez consulter:
www.philandteds.com/register
www.mountainbuggy.com/register
mountainbuggy.com
philandteds.com
FR
17

Entretien du produit Entretien du produit
IMPORTANT
NETTOYAGE ET ENTRETIEN
Vériez l'état de la base ISOFIX. Si elle est
endommagée ou si vous n'êtes pas certain(e) de savoir
l'utiliser, veuillez consulter notre aide en ligne et vous
adresser au SAV.
Entretien de votre base ISOFIX
Il est important de veiller à la propreté de la base ISOFIX.
Nettoyage:
• Essuyer avec de l'eau tiède.
• Sécher complètement avant de ranger.
• Ranger dans un endroit bien aéré et à l'abri de la
lumière directe du soleil susceptible d'endommager
ou de décolorer le produit.
• Ranger le siège dans un endroit sûr lorsqu'il n'est
pas utilisé. Éviter de poser des objets lourds dessus.
• NE PAS laisser le siège pour enfant entrer en
contact avec des substances corrosives comme, par
exemple, l'acide des batteries.
INSTRUCTIONS GÉNÉRALES
Groupe 0 et plus
Convient aux nouveaux-nés et aux
enfants pesant jusqu'à 13kg.
ISOFIX CLASSE E
LE PRÉSENT DOCUMENT CONTIENT
DES INFORMATIONS IMPORTANTES
ET DOIT ÊTRE CONSERVÉ À TITRE DE
RÉFÉRENCE.
Ce siège pour enfant doit être monté tourné vers l'arrière
jusqu'à ce que l'enfant soit d'une taille trop grande ou
pèse plus de 13kg.
Ce siège pour enfant ne doit jamais être monté tourné
Veuillez lire ces avertissements attentivement avant
d'installer le produit, car une mauvaise installation
peut être dangereuse.
1. CETTE BASE ISOFIX POUR SYSTÈMES DE
RETENUE POUR ENFANTS est «semi-
universelle» et est conforme au règlement 44.04
de la CEE. Veuillez noter que la base ISOFIX ne
convient pas à tous les types de véhicule et est
catégorisée comme étant «semi-universelle».
Par conséquent, cette base ne peut être installée
que sur les sièges de certains véhicules
mentionnée dans la liste de véhicules conformes.
2. En cas de doute, veuillez consulter phil&teds ou
vous adresser au commerçant.
Risque extrême
• Ne pas installer sur des sièges de voiture
équipés d'un airbag.
L'utilisation et l'entretien corrects de votre base ISOFIX
garantissent son bon fonctionnement et une longue
durée de vie. Lorsqu'une autre personne utilise votre
base ISOFIX, assurez-vous qu'elle sait comment l'utiliser
et plus particulièrement comment l'ajuster. Vous êtes
responsable de la sécurité de votre enfant.
FR
19