Philco PTL 3602 NX User manual

REFRIGERATOR
USER’S MANUAL
PTL 3602 NX

Dear customer,
Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all
the instructions in this user’s manual.
Copyright © 2020, Fast ČR, a. s. Revision 06/2020

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 1
CONTENTS
PART 1: SAFETY INFORMATION......................................................................................................................2
PART 2: DESCRIPTION OF DEVICE................................................................................................................10
PART 3: INSTALLATION..................................................................................................................................11
Transport and unpacking..............................................................................................................................................................11
Operating conditions......................................................................................................................................................................11
Installation location.........................................................................................................................................................................12
Cleaning before use ........................................................................................................................................................................13
Electrical wiring connection.........................................................................................................................................................13
Installing the handles .....................................................................................................................................................................14
Procedure for switching the door opening direction.........................................................................................................15
Installation of appliances as a pair.............................................................................................................................................21
PART 4: OPERATING THE APPLIANCE..........................................................................................................22
Display and indicator lights on the display ............................................................................................................................22
Setting the temperature................................................................................................................................................................22
PART 5: ARRANGEMENT OF FOOD...............................................................................................................27
Advice about refrigerating food.................................................................................................................................................27
Table - Storing food in the refrigerator.....................................................................................................................................27
PART 6: REGULAR MAINTENANCE ...............................................................................................................28
Cleaning the outer surface ...........................................................................................................................................................28
Cleaning the inside area................................................................................................................................................................28
Cleaning gasket seals......................................................................................................................................................................28
Replacing the LED light..................................................................................................................................................................29
Taking out of operation for an extended period..................................................................................................................29
PART 7: WHAT SHOULD I DO WHEN.............................................................................................................30
Storage instructions........................................................................................................................................................................31
PART 8: INFORMATION SHEET......................................................................................................................33
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS...............34
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES.................................................................................34
This appliance has been tested in accordance with the directives in force in the European Union.
This appliance conforms to the relevant safety provisions for electrical appliances in force in the
European Union.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 2
PART 1: SAFETY INFORMATION
FOR YOUR SAFETY AND CORRECT USAGE, BEFORE
INSTALLING AND FIRST USING THE APPLIANCE,READ THIS USER
MANUAL CAREFULLY, INCLUDING ITS HINTS AND WARNINGS. TO
AVOID UNNECESSARY MISTAKES AND ACCIDENTS,IT IS
IMPORTANT TO MAKE SURE THAT ALL PEOPLE USING THE
APPLIANCE ARE THOROUGHLY FAMILIAR WITH ITS OPERATION
AND SAFETY FEATURES. SAVE THESE INSTRUCTIONS AND BE
SURE THAT THEY REMAIN WITH THE APPLIANCE IF IT IS MOVED
OR SOLD,SO THAT ANYONE USING IT THROUGHOUT ITS LIFE,WILL
BE PROPERLY INFORMED ON ITS USAGE AND SAFETY NOTICES.
FOR THE SAFETY OF LIFE AND PROPERTY,KEEP THE
PRECAUTIONS OF THESE USER'S INSTRUCTIONS AS THE
MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGES CAUSED
BY OMISSION.
●THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8
YEARS AND ABOVE AND PERSONS WITH REDUCED PHYSICAL,
SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE
AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR
INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE
WAY AND UNDERSTAND THE HAZARDS INVOLVED.
●CHILDREN AGED FROM 3 TO 8 YEARS ARE ALLOWED TO LOAD
AND UNLOAD REFRIGERATING APPLIANCES.
●CHILDREN SHALL NOT PLAY WITH THE APPLIANCE.
●CLEANING AND USER MAINTENANCE CANNOT BE PERFORMED
BY CHILDREN WITHOUT SUPERVISION.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 3
●IF THE SUPPLY CABLE GETS DAMAGED, HAVE IT REPLACED BY A
SPECIALIZED SERVICE CENTER IN ORDER TO AVOID DANGEROUS
SITUATIONS. IT IS PROHIBITED TO USE THE APPLIANCE WHEN THE
SUPPLY CABLE IS DAMAGED.
●CAUTION: IF YOUR MODEL IS EQUIPPED WITH AN ICE MAKER
WITHOUT WATER SUPPLY CONNECTION, FILL IT WITH DRINKING
WATER ONLY.
●WARNING: KEEP VENTILATION OPENINGS,IN THE APPLIANCE
ENCLOSURE OR IN THE BUILTIN STRUCTURE,CLEAR OF
OBSTRUCTION.
●WARNING: DO NOT USE MECHANICAL DEVICES OR OTHER
MEANS TO ACCELERATE THE DEFROSTING PROCESS,OTHER THAN
THOSE RECOMMENDED BY THE MANUFACTURER.
●WARNING: DO NOT DAMAGE THE REFRIGERANT CIRCUIT.
●WARNING: DO NOT USE ELECTRICAL APPLIANCES INSIDE THE
FOOD STORAGE COMPARTMENTS OF THE APPLIANCE,UNLESS
THEY ARE OF THE TYPE RECOMMENDED BY THE MANUFACTURER.
●WARNING: DO NOT STORE EXPLOSIVE SUBSTANCES SUCH
AS AEROSOL CANS WITH A FLAMMABLE PROPELLANT IN THIS
APPLIANCE.
ISO 70001701 MARK 200401
LABELS MEDIA UNDER PRESSURE..

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 4
THIS APPLIANCE IS INTENDED TO BE USED IN HOUSEHOLDS AND
SIMILAR PREMISES, SUCH AS:
 KITCHENETTES IN SHOPS, OFFICES AND OTHER WORKPLACES;
APPLIANCES USED BY GUESTS IN HOTELS, MOTELS, AND OTHER
ACCOMMODATION FACILITIES; APPLIANCES USED IN BEDAND
BREAKFAST FACILITIES; APPLIANCES USED IN CATERING AND
OTHER SIMILAR NONVENDING ENVIRONMENTS.
ONLY SOME REFRIGERATOR MODELS ARE EQUIPPED WITH ICE
MAKER. INTEGRATED ICE MAKERS MUST BE INSTALLED BY THE
MANUFACTURER OR ITS SERVICING ORGANIZATION ONLY.
●THE FOLLOWING GOES FOR SELECTED MODELS EQUIPPED
WITH AN ICE MAKER WITH WATER CONNECTION: CAUTION: CAN
ONLY BY CONNECTED TO DRINKING WATER SUPPLY.
●CAUTION: THE APPLIANCE MUST BE FASTENED IN
ACCORDANCE WITH THE MANUAL TO PREVENT DANGER CAUSED
BY ITS INSTABILITY.
●CAUTION:THE COOLING SYSTEM CONTAINS REFRIGERANT
UNDER HIGH PRESSURE. DO NOT MANIPULATE WITH THE SYSTEM.
THE SYSTEM MAY BE REPAIRED BY AUTHORIZED PERSONS ONLY.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 5

WARNING :
RISK OF FIRE / FLAMMABLE MATERIALS
CONTAINS COOLING GAS ISOBUTANE
R600A
REFRIGERANT
THE REFRIGERANT ISOBUTENE R600A IS CONTAINED WITHIN
THE REFRIGERANT CIRCUIT OF THE APPLIANCE,A NATURAL GAS
WITH A HIGH LEVEL OF ENVIRONMENTAL COMPATIBILITY,WHICH
IS NEVERTHELESS FLAMMABLE. DURING TRANSPORTATION
AND INSTALLATION OF THE APPLIANCE,ENSURE THAT NONE OF
THE COMPONENTS OF THE REFRIGERANT CIRCUIT BECOMES
DAMAGED. THE REFRIGERANT R600A IS FLAMMABLE.
●WARNING  REFRIGERATORS CONTAIN REFRIGERANT AND
GASES IN THE INSULATION. REFRIGERANT AND GASES MUST
BE DISPOSED OF PROFESSIONALLY AS THEY MAY CAUSE
EYE INJURIES OR IGNITION. ENSURE THAT TUBING OF THE
REFRIGERANT CIRCUIT IS NOT DAMAGE PRIOR TO PROPER
DISPOSAL.
THE SYMBOL

IS A WARNING AND INDICATES THE
REFRIGERANT AND INSULATION BLOWING GAS ARE FLAMMABLE.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 6
WARNING : RISK OF FIRE / FLAMMABLE MATERIALS
IF THE REFRIGERANT CIRCUIT SHOULD BE DAMAGED:
 AVOID OPENING FLAMES AND SOURCES OF IGNITION.
 THOROUGHLY VENTILATE THE ROOM IN WHICH THE APPLIANCE
IS SITUATED.
IT IS DANGEROUS TO ALTER THE SPECIFICATIONS OR MODIFY
THIS PRODUCT IN ANY WAY.
ANY DAMAGE TO THE CORD MAY CAUSE A SHORT CIRCUIT, FIRE,
AND/OR ELECTRIC SHOCK.
●CAUTION: THE COOLING SYSTEM CONTAINS REFRIGERANT
UNDER HIGH PRESSURE. DO NOT MANIPULATE WITH THE
SYSTEM.
THE SYSTEM MAY BE REPAIRED BY AUTHORIZED PERSONS ONLY.
●CAUTION:WHEN PLACING THE APPLIANCE IT MUST BE ENSURED
THAT THE SUPPLY CORD DOES NOT GET CAUGHT OR DAMAGED.
●CAUTION:DO NOT PLACE PORTABLE MULTIPLE SOCKET-
OUTLETS OR PORTABLE EXTENSION CABLES TO THE REAR SIDE OF
THE APPLIANCE.
ELECTRICAL SAFETY
1. THE POWER CORD MUST NOT BE LENGTHENED.
2. MAKE SURE THAT THE POWER PLUG IS NOT CRUSHED OR
DAMAGED.
A CRUSHED OR DAMAGED POWER PLUG MAY OVERHEAT AND
CAUSE A FIRE.
3. MAKE SURE THAT YOU CAN ACCESS THE MAIN PLUG OF THE
APPLIANCE.
4. DO NOT PULL THE MAIN CABLE.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 7
5. IF THE POWER PLUG SOCKET IS LOOSE, DO NOT INSERT THE
POWER PLUG. THERE IS A RISK OF ELECTRIC SHOCK OR FIRE.
6. YOU MUST NOT OPERATE THE APPLIANCE WITHOUT THE
INTERIOR LIGHTING LAMP COVER.
7. THE FRIDGE IS ONLY APPLIED WITH POWER SUPPLY OF
SINGLE PHASE ALTERNATING CURRENT OF 220~240V/50HZ.
IF FLUCTUATION OF VOLTAGE IN THE DISTRICT OF USER IS SO
LARGE THAT THE VOLTAGE EXCEEDS THE ABOVE SCOPE,FOR
SAFETY SAKE, BE SURE TO APPLY A.C. AUTOMATIC VOLTAGE
REGULATOR OF MORE THAN 350W TO THE FRIDGE.
THE FRIDGE MUST EMPLOY A SPECIAL POWER SOCKET INSTEAD
OF COMMON ONE WITH OTHER ELECTRIC APPLIANCES. ITS PLUG
MUST MATCH THE SOCKET WITH GROUND WIRE.
DAILY USE
●DO NOT STORE FLAMMABLE GAS OR LIQUIDS IN THE
APPLIANCE, THERE IS A RISK OF AN EXPLOSION.
●DO NOT OPERATE ANY ELECTRICAL APPLIANCES IN THE
APPLIANCE E.G. ELECTRIC ICE CREAM MAKERS,MIXERS ETC..
●WHEN UNPLUGGING ALWAYS PULL THE PLUG FROM THE
MAINS SOCKET,DO NOT PULL ON THE CABLE.
●DO NOT PLACE HOT ITEMS NEAR THE PLASTIC COMPONENTS
OF THIS APPLIANCE.
●DO NOT PLACE FOOD PRODUCTS DIRECTLY AGAINST THE AIR
OUTLET ON THE REAR WALL.
●STORE PREPACKED FROZEN FOOD IN ACCORDANCE WITH THE
FROZEN FOOD MANUFACTURE’S INSTRUCTIONS.
●THE APPLIANCES MANUFACTURES STORAGE
RECOMMENDATIONS SHOULD BE STRICTLY ADHERED TO. REFER
TO RELEVANT INSTRUCTIONS FOR STORAGE.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 8
●DO NOT PLACE CARBONATED OR FIZZY DRINKS IN THE
FREEZER COMPARTMENT AS IT CREATES PRESSURE ON THE
CONTAINER,WHICH MAY CAUSE IT TO EXPLODE,RESULTING IN
DAMAGE TO THE APPLIANCE.
●FROZEN FOOD CAN CAUSE FROST BURNS IF CONSUMED
STRAIGHT FROM THE FREEZER COMPARTMENT.
●DO NOT PLACE THE APPLIANCE IN DIRECT SUNLIGHT.
●KEEP BURNING CANDLES,LAMPS AND OTHER ITEMS WITH
NAKED FLAMES AWAY FROM THE APPLIANCE SO THAT DO NOT
SET THE APPLIANCE ON FIRE.
●THE APPLIANCE IS INTENDED FOR KEEPING FOOD STUFF AND/
OR BEVERAGES IN NORMAL HOUSEHOLD AS EXPLAINED IN THIS
INSTRUCTION BOOKLET. YOU SHOULD TAKE CARE WHEN MOVE
IT AS THE APPLIANCE IS HEAVY.
●DO NOT REMOVE OR TOUCH ITEMS FROM THE FREEZER
COMPARTMENT IF YOUR HANDS ARE DAMP/WET, AS THIS COULD
CAUSE SKIN ABRASIONS OR FROST/FREEZER BURNS.
●NEVER USE THE BASE,DRAWERS,DOORS ETC. TO STAND ON OR
AS SUPPORTS.
●FROZEN FOOD MUST NOT BE REFROZEN ONCE IT HAS BEEN
THAWED OUT.
●DO NOT CONSUME ICE POPSICLES OR ICE CUBES STRAIGHT
FROM THE FREEZER AS THIS CAN CAUSE FREEZER BURN TO THE
MOUTH AND LIPS.
●TO AVOID ITEMS FALLING AND CAUSING INJURY OR DAMAGE
TO THE APPLIANCE,DO NOT OVERLOAD THE DOOR RACKS OR
PUT TOO MUCH FOOD IN THE CRISPER DRAWERS.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 9
INSTALLATION
IMPORTANT!
●FOR ELECTRICAL CONNECTION CAREFULLY, FOLLOW THE
INSTRUCTIONS GIVEN IN THIS MANUAL. UNPACK THE APPLIANCE
AND CHECK IF THERE ARE DAMAGES ON IT.
●DO NOT CONNECT THE APPLIANCE IF IT IS DAMAGED. REPORT
POSSIBLE DAMAGES IMMEDIATELY TO THE PLACE YOU BOUGHT
IT. IN THIS CASE RETAIN PACKING.
●IT IS ADVISABLE TO WAIT AT LEAST FOUR HOURS BEFORE
CONNECTING THE APPLIANCE TO ALLOW THE OIL TO FLOW BACK
IN THE COMPRESSOR.
●ADEQUATE AIR CIRCULATION SHOULD BE AROUND THE
APPLIANCE, LACKING THIS LEADS TO OVERHEATING. TO
ACHIEVE SUFFICIENT VENTILATION, FOLLOW THE INSTRUCTIONS
RELEVANT TO INSTALLATION.
●WHEREVER POSSIBLE THE BACK OF THE PRODUCT SHOULD
NOT BE TOO CLOSE TO A WALL TO AVOID TOUCHING OR
CATCHING WARM PARTS COMPRESSOR, CONDENSER TO
PREVENT THE RISK OF A FIRE, FOLLOW THE INSTRUCTIONS
RELEVANT TO INSTALLATION.
●THE APPLIANCE MUST NOT BE LOCATE CLOSE TO RADIATORS
OR COOKERS.
●MAKE SURE THAT THE MAINS PLUG IS ACCESSIBLE AFTER THE
INSTALLATION OF THE APPLIANCE.
●PLACE ALL PACKAGING MATERIALS OUT OF THE REACH OF
CHILDREN, THERE IS A RISK OF SUFFOCATION.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 10
PART 2: DESCRIPTION OF DEVICE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
1. Outer case
2. LED light
3. Flexible wine rack
4. Glass shelf
5. Glass shelf
6. Small glass shelf
7. 0°C cool plus zone
8. Cover of the fruit and vegetable drawer
9. Slider for controlling humidity
10. Fresh food drawer
11. Adjustable levelling feet
12. Shelf for dairy products with a cover
13. Egg tray (inside)
14. Middle shelf
15. Suspended bottle shelf
16. Handle
17. Bottle shelf
18. Refrigerator door
19. Door gasket seals
NOTE:
Due to the continuous innovation of products, the actual appliance may dier from this user's manual
but the functions and methods of use remain the same. For more room in the refrigerator, you may
remove the drawers (except for the bottom drawer) and install grates and the ice tray.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 11
PART 3: INSTALLATION
Transport and unpacking
If the appliance is transported in a horizontal position the oil from the compressor may leak into the cooling
circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before turning it on, so
that the oil ows back into the compressor.
Remove the external packaging, remove the protective plastic lm from the surface of the appliance (if
used) and clean the external parts of the appliance with an agent designed for this purpose. Do not use steel
wool or any coarse agents, which could irreparably damage the surface of the appliance. Carefully remove
all papers and adhesive tape from the appliance, doors and other parts packed in polystyrene. Remove
documents and accessories from inside the appliance.
The packaging material is recyclable and is marked with a recycling symbol. For disposal follow the local
regulations. Packaging materials (plastic bags, polystyrene parts, etc.) must be kept out of the reach of
children, because they present a possible source of danger.
Carefully inspect the appliance. If you discover any defects, stop the installation and contact the vendor.
Operating conditions
The proper operation of the appliance, the refrigeration temperatures are guaranteed only when the
following conditions are met:
• Thetemperatureintheroomwheretheapplianceislocatedconformstotheclimateclassstatedonthe
appliance's rating label.
• Maximumambientrelativehumidity:90%.
• Theappliancemustbeplacedatasucientdistancefromheatsources(e.g.bakingovens,centralheating,
direct sunlight, etc.).
• Theappliancemustbelocatedinsuchaplacethatitisprotectedagainstweathereects.
• Regularmaintenanceisperformedaccordingtotheinstructionsinthisuser'smanual.
• Theventilationopeningsinthecoveroftheappliancemustnotbecoveredbyanything.
• Correctinstallation(e.g.levelling,thecapacityofthesystemcorrespondtothespecicationsontherating
label of the appliance.)
Table – Climatic class
Climatic class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 12
Installation location
The installation location of the appliance must meet the requirements in the paragraph "Operating
conditions" and must have a stable oor with a load bearing capacity corresponding to the weight of the
appliance.
Furthermore, you must maintain distances and dimensions of the appliance, so that correct operation is
ensured:
1. Top part at least 20 cm;
2. Rear part at least 10 cm;
3. The wall on the side where the door opens at least 30 cm.
Ventilation requirements
Theareabehindtheappliancemustprovideforsucientaircirculation.
Level the appliance using the adjustable feet, ensure there is a gap between the bottom edge of the
applianceandtheground,sothatthereissucientcirculationofthecoolingair,bywhichyouwillensure
the optimal performance of the cooling circuit.
Check whether any cooling circulation pipes have been damaged during the installation.
• Usetheapplianceonlyforthepurposesforwhichithasbeendesigned.
• Theappliancemustbelocatedonarigidandevensurface.
Inthiswayyouwillensurefreecirculationofthecoolantandeectiveoperationofyourappliance.
• Ifpossible,placetheapplianceintoacool,wellventilatedanddryroom.
• Donotlocatetheapplianceindirectsunlight,orinaroomwithahightemperature,inthevicinityof
any sources of direct heat, such as heating, an oven, a stove, etc. – this would mean that the compressor
would need to work a lot harder resulting a substantially higher power consumption level.
If it is not possible to prevent the installation in the vicinity of a heat source, we recommend the insertion of
an appropriate insulating board (do not use asbestos) between the appliance and the heat source; or at least
to maintain the following minimum distances:
• Fromagasorelectricstove5cm;
• Fromaheateroroven,etc.50cm;
• Fromanothercoolingappliance2cm.
Do not place any appliances on the appliance, which release heat on to the appliance, such as microwave
ovens, toasters, etc.
Never cover the ventilation grill. Pull out the power plug by pulling on the plug itself, never pull on the cord
when disconnecting the appliance.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 13
Before turning on the appliance, allow it to stand in its nal location for 12 hours, the coolant circuit
will stabilise in this way and no operating problems will occur. Before connecting the appliance to the
power grid check that it is perfectly dry inside – especially in the corners.
Danger warning
The coolant may be highly ammable, depending on its composition. The coolant circuit was
hermetically closed and sealed and was tested many times for possible leaks. Any unqualied
tampering with the product may cause a re hazard. Check that there is no mechanical
interruption or eect on the coolant circulation, namely in the accessible parts around the
compressor.
Only professionally qualied persons may work on the cooling system.
Recommendation:Werecommendthatsucientspaceof135°iskeptinthefrontpartfortheopeningofthe
door – see the following picture.
Cleaning before use
Check that you have removed from the appliance all adhesive tape used to hold accessories . Then clean all
the inside parts using lukewarm water with a neutral cleaning agent, vinegar or sodium carbonate – in this
way you will remove the characteristic odour of new parts – then dry carefully. Do not use detergents or
aggressive agents, which could damage the surfaces.
Electrical wiring connection
Before connecting the power plug to the power socket, check that:
• Yourhandsarecompletelydry.
• Thevoltageandfrequencyshownontheratinglabeloftheappliancecorrespondstothatinthehome
powergrid(permittedtolerancefrom-6%to+6%fornominalvoltage,forusewithdierentvoltages,
use a voltage converter with the corresponding parameters).
• Thecordandtheplugarenotdamagedorcaughtunderheavyobjects.
• Thepowercordisnotexcessivelytensioned;itisnotpermittedtouseanextensioncord.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 14
Do not connect the appliance to a voltage rectier (e.g. solar power plant) or use an extension cord.
The appliance must be connected to a working grounding lead. If the power socket of the home
system is not grounded in accordance with the current legal regulations, connect the appliance after
consulting a specialised technician to the grounding lead itself. The manufacturer takes no
responsibility for injuries caused as a result of not following these instructions.
If you do not correctly level the refrigerator during the installation, the door may not close shut and
seal properly, which may cause problems with the cooling, ice build up or moisture. Levelling the
refrigerator is very important.
Level the refrigerator using the adjustable feet – turn them clockwise to lift the refrigerator and turn them
anticlockwise to lower the refrigerator.
Installing the handles
For easier transport, the handles are supplied separately in a plastic bag and it is necessary to install them.
1. Remove the screw covers on the left side of the door and place them in the plastic bag.
2. Place the handle on to the left part of the door. The axis of the screw holes in the handle and the holes in
the door should be aligned as shown in the picture below.
3. Screw on the handles with the supplied screws found in the plastic bag. Then install the handle covers.
NOTE:
Install the handle covers as shown in the picture: rst secure the clip, then close the cover from the inner
side until you hear an audible click.
clip

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 15
Procedure for switching the door opening direction
You can change the door opening direction - from the right (as supplied by the manufacturer) to the left if
the location of the refrigerator requires it.
WARNING!
When changing the door opening direction, the appliance must not be connected to the power
supply. Check that you have disconnected the plug of the power cord from the mains power
socket.
Tools
8mm socket wrench Philips screwdriver
Narrow at screwdriver 8mm double-ended wrench
NOTE:
Prior to starting with the change, place the appliance on its back so as to gain access to its underside.
Lay the appliance down on to a soft mat or similar material so that the cooling circuit located in the
rear of the appliance is not damaged.
To change the door opening direction, proceed as follows.
1. Stand the refrigerator upright. Open the door of the top part and remove all the shelves (careful not to
break the shelves) and then close the door.
Door shelves

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 16
2. Open part 1 in the top part of the refrigerator from the right side and then remove part 3 and part 4 on
the door in the same manner. Remove part 2 and put it back into the plastic bag.
1 Top cover
2 Top hinge cover (right)
3 Top cover of the top door
4 Corner cover
3. Disconnect electrical connector 1 and electrical connector 2 and then remove part 3.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 17
4. Remove screws 1, release cables 2 and remove part 3.
1 Special self-tapping screws
2 Grounding wire
3 Top hinge part
NOTE:
During step 4, hold the door with your hand so that it does not fall o .
5. Remove the door and place it on a soft surface with the front part facing upwards. Lift up part 1 and part
4, then loosen screws 2 as shown in the picture. Change the handle 3 to the right side, then insert screw
2, part 1 and part 4 afterwards. Loosen screws 7, remove part 6 and part 5, turn part 6 and then install
part 5 and part 6 on the right side using screws 7.
1 Handle covers
2 Special self-tapping screws
3 Handle
4 Screw hole covers
5 Door holder
6 Stopper
7 Self-tapping screws
NOTES:
Remove the handle cover as shown on the picture: bend the top wing and remove the top clip from the
handle and also on the other side, then remove the handle cover.

Copyright © 2020, Fast ČR, a. s. Revision 06/2020
EN - 18
clip
Install the handle covers as shown in the picture: rst secure the clip, then close the cover from the inner side
until you hear an audible click.
clip
6. Lay the refrigerator down at, remove part 3 and release screw 4. Remove part 2 and part 1.
1
2
3
4
1 Bottom hinge (right)
2 Fixed plate of the front foot
3 Levelling feet
4 Self-tapping screws
Washer
NOTE:
The washer may stick to the bottom door.
7. Screw out the bottom hinge, move it to the other side with the screw holes and then screw it on and
then also the washer.
8. Perform step 6 again, change part 1 to the left side and part 2 to the right side and then secure with
screw 4. Finally install part 3.