Philio Technology Corporation PSC03-2 Series User manual

Philio-Tech corporation
User Manual
PSC03-2 Gateway Series
(PSC03-2A; PSC03-2B; PSC03-2C; PSC03-2 ; PSC03-2E)

PSC03 Function Compare :
PSC03-2A PSC03-2B PSC03-2C PSC03-2D PSC03-2E
SIREN V
USB Function V V V V
Battery Option Option
Top case Norma S im type S im type S im type S im type
Jump Wires V

1 . Connect to the internet.
• Go to Settings -> Wi-Fi, choose your own Wi-Fi SSID, and connect it.
• Once you connect to Wi-Fi, open the app.

2 . Go to Settings -> Gateway Address -> UID, and press QR Code.
• Use the ca era of your obile device to scan the QR Code to set up
the gateway address.

3. Add your devices
• In the Sensor page, press Blue Gear -> Include Device to add Z-wave
devices. (Re e ber to activate the include ode of your device by
flipping three ti es the trigger on it.)

4. Add IPCa
• In the Sensor page, press Blue Gear -> Add IPCa → QR Code to add
IPCa by scanning the QR Code with ca era.

5. Add a roo
• Press Add new in the Roo page to add a new roo , enter the na e of
the roo as you like.

6. You can use the picture as your
roo cover which the IPCa is
onitoring.
• Drag the sensor icon into your
roo card for easy anage ent.

7. Scene
• Scene can set the roo a biance
quickly. It can help you to have a
better experience at the special
o ent.

8. Macro
• Still worry about your flat security?
Macro is just like your 24-7 personal
ho e guard.
It secures your flat. Just set the reactives
you wishes, it obeys your orders faithfully.

11. Schedule
• Schedule is your loyalty housekeeper. It do
everything accurately you asked.
• Drag event icon into Schedule, set date,
and ti e , just that easy.

Phi io Techno ogy Corporation
www.philio-tech.co
8F., No.653-2, Zhongzheng Rd., Xinzhuang District,
New Taipei City, Taiwan 242
TEL: [phone]
FAX: [phone]
sa es@phi io-tech.com
[email protected]

FCC ID: RHHPSC03
FCC Interference Statement
This equip ent has been tested and found to co ply with the li its for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These li its are designed to provide reasonable protection against har ful interference in a residential installation.
This equip ent generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, ay cause har ful interference to radio co unications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equip ent does cause har ful interference to radio or television reception, which can be deter ined by turning the
equip ent off and on, the user is encouraged to try to correct the interference by one of the following easures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip ent and receiver.
• Connect the equip ent into an outlet on a circuit different fro that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device co plies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device ay not cause har ful interference, and
(2) This device ust accept any interference received, including interference that ay cause undesired operation.
FCC Caution: Any changes or odifications not expressly approved by the party responsible for co pliance could void the user's
authority to operate this equip ent.
This trans itter ust not be co-located or operating in conjunction with any other antenna or trans itter.
Warning
Do not dispose of electrical appliances as unsorted unicipal waste, use separate collection facilities.
Contact your local govern ent for infor ation regarding the collection syste s available.
If electrical appliances are disposed of in landfills or du ps, hazardous substances can leak into the groundwater and get into

the food chain, da aging your health and well-being.
When replacing old appliances with new once, the retailer is legally obligated to take back your old appliance for disposal at least
for free of charge.
RF exposure warning
This equip ent ust be installed and operated in accordance with provided instructions and the antenna(s) used for this
trans itter ust be installed to provide a separation distance of at least 20 c fro all persons and ust not be co-located or
operating in conjunction with any other antenna or trans itter. End-users and installers ust be provide with antenna
installation instructions and trans itter operating conditions for satisfying RF exposure co pliance.