Philips AVENT Premium Plus SCF394 User manual

SCF394, SCF392
Single/Double
Electric Breast Pump
Premium Plus
www.philips.com/mybreastpump
مﻷا ﺐﻴﻠﺣ ﺔﻄﻓﺎﺷ
ﺔﻴﺋﺎﺑﺮﻬﻜﻟا
ﺔﺟودﺰﻤﻟا/ﺔﻳدﺮﻔﻟا
ﺲﻠﺑ مﻮﻴﻤﻳﺮﺑ

SCF394, SCF392
Single/Double
Electric Breast Pump
Premium Plus
www.philips.com/mybreastpump
مﻷا ﺐﻴﻠﺣ ﺔﻄﻓﺎﺷ
ﺔﻴﺋﺎﺑﺮﻬﻜﻟا
ﺔﺟودﺰﻤﻟا/ﺔﻳدﺮﻔﻟا
ﺲﻠﺑ مﻮﻴﻤﻳﺮﺑ

1
CB
A
C
B
A
A1
A2
A3
C5
C3 C4
C2
C1
A4
B1
B2
B3
B4
B5
B6
A5

5
English
Contents
Introduction __________________________________________________________________________________ 5
General description ____________________________________________________________________________ 6
Intended use and indications for use _____________________________________________________________ 6
Important safety information____________________________________________________________________ 6
Before rst use ________________________________________________________________________________ 9
Cleaning and disinfecting_______________________________________________________________________ 9
Using the breast pump ________________________________________________________________________ 12
Using the breast pump when you have symptoms of engorgement _________________________________ 17
After use ____________________________________________________________________________________ 18
Feeding breast milk with the bottle _____________________________________________________________ 19
Compatibility_________________________________________________________________________________ 21
Ordering accessories __________________________________________________________________________ 21
Recycling ____________________________________________________________________________________ 21
Battery removal instructions____________________________________________________________________ 21
Troubleshooting______________________________________________________________________________ 22
Undesirable side eects _______________________________________________________________________ 25
Warranty and support_________________________________________________________________________ 25
Storage conditions____________________________________________________________________________ 25
Electromagnetic elds (EMF) ___________________________________________________________________ 25
Technical information _________________________________________________________________________ 26
Explanation of symbols ________________________________________________________________________ 29
Introduction
Congratulations on your purchase and welcome to Philips Avent! To fully benet from the support that
Philips Avent oers, register your breast pump at www.philips.com/mybreastpump.
The Philips Avent single/double electric breast pump Premium Plus is inspired by babies and their natural
suction movement. The soft silicone cushion stimulates the nipple with gentle massaging movements,
helping you to express milk comfortably and eectively. The combination of suction and nipple stimulation
triggers fast milk ow. The no-lean-forward design enables you to sit in a relaxed, upright position while
expressing.
Healthcare professionals and the World Health Organization recommend to exclusively feed children with
breast milk during the rst six months of life and to continue giving them breast milk for two years next
to oering additional nutritious foods. This is because your breast milk is specially adapted to your baby’s
needs and helps to protect your baby against infection and allergies. To breastfeed longer, you can express
and store your milk so that your baby can still enjoy the benets of it, even if you cannot be there to provide
it yourself. As the pump is compact, quiet and discrete to use, you can take it with you anywhere, allowing
you to express milk at your own convenience and to maintain your milk supply.
If breastfeeding goes well, it is advisable (unless recommended otherwise by your healthcare professional)
to wait until your milk supply and breastfeeding schedule are established (normally at least 2 to 4 weeks
after giving birth) before you start expressing.
English

6English
General description
Note: The numbers mentioned below refer to the numbers in the gure on the front foldout page of this
user manual.
Note: The double breast pump comes with two pieces of the items shown in Figures B and C.
Product description (Fig. A)
A1 Motor unit
A2 Breast pump kit
A3 Bottle
A4 Adapter*
A5 Double breast pump
* The adapter supplied may vary for dierent countries.
Breast pump kit (Fig. B)
B1 Silicone tube and cap
B2 Silicone diaphragm
B3 Pump body
B4 Cover
B5 Cushion
B6 White valve
Philips Avent Natural bottle (Fig. C)
C1 Bottle cap
C2 Screw ring
C3 Teat
C4 Sealing disc
C5 Bottle
Accessories
There are multiple versions of this breast pump package, which all come with a dierent combination of
the following Philips Avent accessories:
-Breast pads
-Travel bag
-Insulation pouch
-Cleaning brush
-Storage cups with adapter*
-Breast milk storage bags*
-Natural bottles
* For these accessories, a separate user manual is provided.
Intended use and indications for use
The Philips Avent single/double electric breast pump Premium Plus is intended to express and collect milk
from the breast of a lactating woman, and indicated to alleviate the symptoms of engorgement. The device
is intended for a single user.
Important safety information
Read this user manual carefully before you use the breast pump and save it for future reference.
This user manual can also be found online at: www.philips.com/support.
This product is operated by the lactating woman herself.
You can use this breast pump in an everyday environment.

7
English
Contraindications
- Never use the breast pump while you are pregnant, as pumping can induce labor.
Warnings
Warnings to avoid choking, strangulation and injury:
- Do not allow children or pets to play with the motor unit, the adapter, packaging
materials or accessories.
- Always unplug the breast pump after use and when fully charged. Store the breast
pump when not in use.
-This breast pump is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge. Such persons can only use this breast pump
if they are supervised by or have received proper instruction concerning use of the appliance by a person
responsible for their safety.
Warning to prevent transmitting infectious diseases:
-If you are a mother who is infected with Hepatitis B, Hepatitis C or Human Immunodeciency Virus (HIV),
expressing breast milk will not reduce or remove the risk of transmitting the virus to your baby through
your breast milk.
Warnings to avoid electric shock:
-Inspect the breast pump, including the adapter, for signs of damage before each use. Do not use the
breast pump if the adapter or plug is damaged, if it does not work properly or if it has been dropped or
submerged in water.
-Only use the adapter (S009AHz050yyyy) provided with this breast pump.
-Always ensure that it is easy to disconnect the device from the mains in case of malfunction. The adapter
is considered the disconnection device.
Warnings to avoid contamination and to ensure hygiene:
-For hygienic reasons, the breast pump is only intended for repeated use by a single user.
-Clean and disinfect all parts before rst use and after each use.
-Do not use antibacterial or abrasive cleaning agents to clean the breast pump parts as this may cause
damage.
-Wash your hands thoroughly with soap and water before you touch breast pump parts and breasts to
prevent contamination. Avoid touching the inside of containers or lids.
Warnings to avoid breast and nipple issues including pain:
-Do not use the breast pump if the silicone diaphragm appears to be damaged or broken. See chapter
‘Ordering accessories’ for information on how to obtain replacement parts.
-Only use accessories and parts recommended by Philips Avent.
-There are no user serviceable parts inside the motor unit of the breast pump.
-No modication of the breast pump is allowed. If you do so, your warranty becomes invalid.
-Never use the breast pump while you are sleepy or drowsy to avoid lack of attention during use.
-Always switch o the breast pump before you remove the pump body from your breast, in order to
release the vacuum.
-If the vacuum is uncomfortable or causes pain, switch o and remove the breast pump from your breast.
English

8English
-Do not continue pumping for more than ve minutes at a time if you do not succeed in expressing any
milk. Try to express at another time during the day.
-If the process becomes very uncomfortable or painful, stop using the pump and consult your healthcare
professional.
Warnings to prevent damage and malfunction of the breast pump:
-Portable radio frequency (RF) communications equipment (including mobile phones and peripherals
such as antenna cables and external antennas) should not be used closer than 30cm (12in) to any part
of the breast pump, including adapter. This could have a negative eect on the performance of the
breast pump.
-Use of this equipment adjacent to or stacked with other equipment should be avoided because it could
result in improper operation.
Warning to avoid increased electromagnetic emissions or decreased electromagnetic immunity of
this device, resulting in improper operation:
-Do not use any other adapter or charging cable than supplied with the device.
Warning
Battery safety instructions
-Only use the product for its intended purpose. Read this important information carefully before you use
the product and its batteries and accessories, and save it for future reference. Misuse can lead to hazards
or serious injuries. Accessories supplied may vary for dierent products.
-To charge the battery, only use the detachable adapter (S009AHz050yyyy) provided with the product. Do
not use an extension cord.
-Charge, use and store the product at the temperature ranges indicated in the technical specications
table in this user manual.
-Keep product and batteries away from re and do not expose them to direct sunlight or high
temperatures.
-If the product becomes abnormally hot or smelly, changes color or if charging takes longer than usual,
stop using and charging the product and contact Philips.
-Do not place products and their batteries in microwave ovens or on induction cookers.
-Do not open, modify, pierce, damage or dismantle the product or battery to prevent batteries from
heating up or releasing toxic or hazardous substances. Do not short-circuit, overcharge or reverse charge
batteries.
-If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately rinse
well with water and seek medical care.
Cautions
Cautions to prevent damage to and malfunctioning of the breast pump:
-Prevent the adapter and motor unit from coming into contact with water.
-Never put the motor unit or the adapter in water or in a dishwasher, as this causes permanent damage
to these parts.
-Keep the adapter and the silicone tubes away from heated surfaces to avoid overheating and
deformation of these parts.

9
English
Before rst use
Disassemble, clean and disinfect all parts that come into contact with breast milk before you use the
breast pump for the rst time and after every use.
Fully charge the device before you use it for the rst time or after a long period of non-use.
Cleaning and disinfecting
Overview
Clean and disinfect the parts that come into contact with the breast and breast milk as described below:
When How
Clean and disinfect before rst use
and after every use.
Disassemble all parts and then
clean them as described in chapter
'Cleaning' and disinfect them as
described in chapter 'Disinfecting'.
The following parts do not come into contact with the breast and breast milk; clean them as described below:
When How
Clean when needed. Wipe with a clean, damp cloth with
water and mild detergent.
English

10 English
Step 1: Disassembling
Disassemble the breast pump, bottle and storage cup completely.
Also remove the white valve from the breast pump.
Step 2: Cleaning
The parts that come in contact with milk can be cleaned manually or in the dishwasher.
Warning: Do not use antibacterial or abrasive cleaning agents to clean the breast pump
parts as this may cause damage.
Caution: Never put the motor unit or the adapter in water or in a dishwasher, as this
causes permanent damage to these parts.
Caution: Be careful when you remove and clean the white valve. If it gets damaged,
your breast pump does not function properly. To remove the white valve, gently pull at
the ribbed tab on the side of the valve. To clean the white valve, rub it gently between
your ngers in warm water with some dishwashing liquid. Do not insert objects into the
white valve, as this may cause damage.
Step 2A: Manual cleaning
Supplies needed:
-Mild dishwashing liquid
-Drinking-quality water
-Soft, clean brush
-Clean tea towel or drying rack
-Clean sink or bowl

11
English
1. Rinse all parts under
a running tap with
lukewarm water.
2. Soak all parts for
5minutes in warm
water with some mild
dishwashing liquid.
3. Clean all parts with a
cleaning brush.
4. Thoroughly rinse all
parts under a running
tap with cold clear water.
5. Leave all parts to air-
dry on a clean tea towel
or drying rack.
Step 2B: Cleaning in the dishwasher
Supplies needed:
-Mild dishwashing liquid or a dishwashing tablet
-Drinking-quality water
Note: Food colorings may discolor parts.
1. Place all parts on
the top rack of the
dishwasher.
2. Put dishwashing
liquid or a tablet in
the machine and run a
standard program.
3. Leave all parts to air-
dry on a clean tea towel
or drying rack.
5 min.
English

12 English
Step 3: Disinfecting
Supplies needed:
-A household pot
-Drinking-quality water
Caution: During disinfection with boiling water, prevent the bottle or other parts from
touching the side of the pot. This can cause irreversible product deformation or damage
that Philips cannot be held liable for.
1. Fill a household pot
with enough water
to cover all parts and
place all parts in the pot.
Let the water boil for
5minutes. Make sure the
parts do not touch the
side of the pot.
2. Allow the water to
cool down.
3. Gently remove the
parts from the water.
Place the parts on a clean
surface/tea towel or
drying rack to air-dry.
4. Store the dry items
safely in a clean, protected
area until needed. Ensure
that the clean parts have
air-dried completely
before storing them to
help prevent germs and
mold from growing.
Using the breast pump
Cushion size
The Philips Avent single/double electric breast pump Premium Plus has a soft, active cushion. There is
only one cushion size. It gently stimulates your nipple to trigger milk ow. The cushion is made of exible
silicone, tting nipple sizes up to 30mm/1.18in.
Charging the breast pump
Fully charge the battery before you use the breast pump for the rst time and when the battery is low.
Fully charging the battery takes up to 4hours.
1. Switch o the device. 2. Insert the adapter
into the wall socket and
insert the small plug at
the other end into the
motor unit.
3. The battery is
charging.
4. When the battery is
fully charged, remove the
adapter from the wall
socket and pull the small
plug out of the motor unit.
5 min.
3 sec.

13
English
Battery indicator light description
All lights are steady
on. The battery is
fully charged.
Charged battery
operates
approximately
3pumping
Two lights are
steady on.
The battery is
charged suciently
for maximum two
sessions.*
First light ashes
slowly.
The battery is
charged suciently
for maximum one
session.*
First light ashes
quickly.
The battery is very
low, the device
will soon stop
operating, charging
is needed.
Battery lights light
up one by one and
go out all together.
The battery is
charging.
* One session is the equivalent of 15minutes (double electric breast pump) or 30 minutes (single electric
breast pump).
Assembling the breast pump
Make sure you have cleaned and disinfected the parts of the breast pump that come into contact with milk.
Warning: Be careful, when you have disinfected the breast pump parts by boiling
them, they can be very hot. To prevent burns, only start assembling the breast pump
when disinfected parts have cooled down.
Warning: Wash your hands thoroughly with soap and water before you touch
breast pump parts and breasts to prevent contamination. Avoid touching the inside of
containers or lids.
Check the breast pump kit parts for wear or damage before use and replace them if necessary.
Note: Correct placement of the cushion, silicone diaphragm and silicone tube is essential for the breast
pump to form a proper vacuum.
1. Wash your hands
thoroughly with soap
and water.
2. Push the white valve in
the pump body as far as
possible.
3. Screw the pump body
onto the bottle.
4. Place the cushion in
the pump body and
make sure that the rim
covers the pump body.
English

14 English
4A. Push the inner part
of the cushion into
the funnel against the
line (indicated with an
arrow).
5. Place the silicone
diaphragm in the pump
body.
5A. Make sure that the
silicone diaphragm ts
securely around the rim
by pressing it down with
your thumbs.
6. Attach the silicone
tube and cap onto the
silicone diaphragm.
Push down the cap until
it is securely in place.
7. Connect the tube(s) to
the motor unit.
8A. When the breast
pump is charged, you
can use it cordless. Press
and hold the on/o
button until the device
switches on.
8B. You can also use the
breast pump connected
to the wall socket. If the
battery is low, insert the
adapter into the wall
socket and insert the
small plug at the other
end into the motor unit.
9. The breast pump is
now ready for use.
Note: You can place
the cover over the
cushion to keep the
breast pump clean when
you take it with you and
while you are preparing
for expressing.
3 sec.

15
English
Motor unit part description
1 USB power inlet
2 On/o button with pause/play function
3 Mode selection button
4 'Level down' button
5 'Level up' button
6 LED display
7 Tubing port for single breast pump
8 Tubing ports for double breast pump
LED display description
1 Battery indicator lights
2 Timer (minutes) and vacuum level indication
3 Expression icon
4 Stimulation icon
Explanation of modes
The breast pump has two modes. Below you nd an explanation of these modes.
Mode icons Mode Explanation No. of suction levels
Stimulation mode Mode to stimulate the breast to start
up the milk ow.
8 suction levels
Expression mode Mode for ecient milk removal
after milk has started owing. After
90 sec. of stimulation, the device
automatically switches to the
expression mode.
16 suction levels
7
1 3 5
4 6
8
2
1
2
3
4
English

16 English
The number on the display shows the running time
in minutes.
When you change the suction level, the display
shows the selected suction level for a few seconds
and then shows the running time again.
Pumping instructions
Warning: Before you remove the pump body from your breast, always switch o the
breast pump to release the vacuum.
Warning: Do not continue pumping for more than 5 minutes at a time if you do not
succeed in expressing any milk. Try to express at another time during the day.
Warning: If the process becomes very uncomfortable or painful, stop using the pump
and consult your healthcare professional.
Note: If you regularly express more than 125ml/4oz per session, you can purchase and use a
260ml/9oz Philips Avent Natural bottle to prevent overlling and spillage.
Note: The breast pump can be used cordless if it is suciently charged, but you can also use it connected
to the wall socket.
1. Wash your hands
thoroughly with soap
and water and make
sure that your breast is
clean.
2. Place the breast pump
kit onto your breast.
Make sure that you
center your nipple.
3. Press and hold the
on/o button until the
device switches on. The
indicator lights go on to
indicate that the device
is in stimulation mode.
4. The breast pump starts
in stimulation mode
and slowly increases its
vacuum to the last used
stimulation suction level
(or level 5 when used for
the rst time).
3 sec.

17
English
5. The display shows the
running time.
6. Use the 'level up' and
'level down' buttons to
change the suction level
to your preference.
7. After 90 seconds the
breast pump will switch
smoothly to expression
mode and slowly increase
its vacuum to the last
used expression suction
level (or level 11 when
used for the rst time).
8. If your milk starts
owing earlier or if you
want to switch from
expression to stimulation
mode, you can switch
modes with the mode
selection button.
9. Briey press the on/
o button if you want
to pause. To continue,
briey press the on/o
button again.
10. Press and hold the
on/o button to switch
o.
11. Unplug the adapter
from the wall socket and
pull the small plug out of
the motor unit.
Tip: For optimal expression, choose the highest setting that still feels comfortable. This setting may dier
across dierent sessions.
Tip: You can use the double breast pump as a single breast pump by connecting only the tube of one
pump kit to the motor unit. 
Using the breast pump when you have symptoms
of engorgement
Breast engorgement means your breasts are overlled with milk. This is a painful and unpleasant condition.
Frequent extraction of milk and completely emptying the breasts of milk can reduce engorgement. When
you have symptoms of engorgement, make sure you use a lower vacuum level to minimize stretching of
breast tissue.
Note: When symptoms of engorgement are present, make sure you empty your breasts completely
during each expression session.
3 sec.
English

18 English
After use
1. Unscrew the bottle. 2A. To store the breast
milk: close the bottle
with the sealing disc and
screw ring.
2B. To prepare the bottle
for feeding your baby:
place a teat in a screw ring
and screw the assembled
screw ring onto the
bottle. Seal the teat
with the bottle cap (see
'Assembling the bottle').
3. Remove the silicone
tube and cap from the
breast pump kit.
4. Disassemble and clean
all parts that have been
in contact with breast
milk (see 'Cleaning and
disinfecting').
5. For easy storage, wrap
the silicone tube around
the motor unit and clip
the cap onto the tube.
Warning: Refrigerate or freeze expressed milk immediately or keep it at a temperature
of 16-29°C (60-85°F) for a maximum of 4 hours before you feed your baby.
For more information about the breast pump and tips for expressing milk, visit www.philips.com/avent.
Storing breast milk
Below you nd guidelines for storing breast milk:
Storage location Temperature Max. storage duration
Room 16-29°C (60-85°F) 4 hours
Refrigerator 4°C (39°F) 4 days
Freezer < -4°C (25°F) 6 months
Warning: Never refreeze thawed breast milk to avoid a decrease in milk quality.
Warning: Never add fresh breast milk to frozen breast milk to avoid a decrease in milk
quality and unintended thawing of the frozen milk.
1
2

19
English
Feeding breast milk with the bottle
For your child’s safety and health
WARNING!
-Continuous and prolonged sucking of uids will cause tooth decay.
-Always check food temperature before feeding.
-Throw away at the rst signs of damage or weakness.
-Keep components not in use out of the reach of children.
-Never attach to cords, ribbons, laces or loose parts of clothing. The child can be strangled.
-Never use feeding teats as a soother.
-Always use this product with adult supervision.
-Keep the bottle cap away from children to avoid suocation.
-Do not allow children to play with small parts or walk/run while using bottles.
-Inspect all parts before use and pull the feeding teat in all directions. Throw away any part at the rst
signs of damage or weakness.
-Always discard any breast milk that is left over at the end of a feed.
Caution: To avoid damage to the bottle
-Do not place in a heated oven, plastic can melt.
-Plastic material properties may be aected by disinfection and high temperatures. This can aect the t
of the bottle cap.
-Do not leave a feeding teat in direct sunlight or heat, or leave in disinfectant for longer than
recommended because this may damage the product.
Before using the bottle
-Inspect the bottle and feeding teat before each use and pull the feeding teat in all directions to prevent
a choking hazard. Throw away at the rst signs of damage or weakness.
-Clean and disinfect the bottle before rst use and after every use (see 'Cleaning and disinfecting').
English

20 English
Assembling the bottle
1. The teat is easier to
assemble if you move
it back-and-forth while
pulling it upwards
instead of pulling it up in
a straight line.
2. Make sure you pull
the teat through until
its lower part is aligned
with the screw ring.
3. Make sure you place
the cap vertically onto
the bottle so that the
teat sits upright.
4. Screw the screw ring
with teat and cap on the
bottle.
5. To remove the cap,
place your hand over the
cap and your thumb in
the dent of the cap.
Heating breast milk
If you use frozen breast milk, let it defrost completely before you heat it.
Note: If you need to feed your baby quickly, you can defrost the milk in a bowl of hot water.
Heat the bottle with defrosted or refrigerated breast milk in a bowl of hot water or in a bottle warmer.
Remove the screw ring and sealing disc from the bottle.
Warning: It is not recommended to use a microwave to warm up breast milk.
Microwaves might alter the quality of breast milk and destroy some valuable nutrients
and may produce localized high temperatures. If you heat up breast milk in the
microwave, only place the container without screw ring, teat and cap in microwave.
Always stir heated breast milk to ensure even heat distribution and check the
temperature before serving.