Philips CEM3000X/78 User manual

Register your product and get support at
www.philips.com/welcome
EN User manual
CEM3000

3
English
EN
Contents
1 Important 4
Safety 4
Notice 4
2 Your car audio system 6
Introduction 6
What’s in the box 6
Overview of the main unit 7
Overview of the remote control 8
3 Get started 9
Install the car audio 9
Attach the front panel 9
Install remote control battery 10
Turn on 10
Select country/region 10
Set clock 11
4 Listen to radio 11
Tune to a radio station 11
Store radio stations in memory 12
Tune to a preset station 12
5 Play audio files 13
Play a disc 13
Play from USB 13
Insert a card 14
Play from iPod/iPhone 14
Search for an MP3/WMA track on
iPod/iPhone 15
View play information 16
Repeat play 16
Shuffle play 16
Intro play 16
Connect external sound source 16
6 Adjust sound 17
Adjust volume 17
Mute 17
Turn Full Sound on/off 17
Select preset equalizer 17
Tunr on/off max sound 17
Switch music listening zone 17
Other sound settings 17
7 Adjust system settings 18
Turn beep sound on/off 18
Select blackout setting 18
Turn demo mode on/off 18
LCD Color 19
Reset 19
8 Additional information 20
Detach the front panel 20
Replace fuse 20
Remove the unit 20
9 Product information 21
10 Troubleshooting 22
11 Glossary 23

4
The apparatus shall not be exposed to•
dripping or splashing.
Do not place any sources of danger on•
the apparatus (e.g. liquid filled objects,
lighted candles).
Notice
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
“Made for iPod” means that an electronic
accessory has been designed to connect
specifically to iPod and has been certified by
the developer to meet Apple performance
standards.
“Works with iPhone” means that an electronic
accessory has been designed to connect
specifically to iPhone and has been certified
by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
1 Important
Safety
Read and understand all instructions•
before you use your apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
This apparatus is designed for negative•
ground (earth) 12 V DC operation only.
To ensure safe driving, adjust the volume•
to a safe and comfortable level.
Improper fuses can cause damage or•
fire. When you need to change the fuse,
consult a professional.
Use only the supplied mounting hardware•
for a safe and secure installation.
To avoid short circuit, do not expose the•
apparatus, remote control or remote
control batteries to rain or water.
Never insert objects into the ventilation•
slots or other openings on the apparatus.
Clean the apparatus and frame with a•
soft, damp cloth. Never use substances
such as alcohol, chemicals or household
cleaners on the apparatus.
Never place any objects other than discs•
into the apparatus.
Never use solvents such as benzene,•
thinner, cleaners available commercially,
or anti-static sprays intended for discs.
Visible and invisible laser radiation when•
open. Avoid exposure to beam.
Risk of damage to the apparatus screen!•
Never touch, push, rub or strike the
screen with any object.
Caution
Use of controls or adjustments or performance•
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
EN

5
This product complies with the radio
interference requirements of the European
Community.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2010 © Koninklijke Philips Electronics N.V.
All rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
This apparatus includes this label:
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
English
EN

6
cFront panel
dTrim plate
eCarrying case for front panel
fSleeve
gRubber cushion
hScrews x 4 pcs
iISO male connectors
jDisassembly tools x 2 pcs
kUser manual
lQuick start guide
a
f
dec
b
lki
j
h
g
a
f
dec
b
lki
j
h
g
2 Your car audio
system
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With the in-car audio system, you can enjoy
your drive while listening to:
FM or AM (MW) radio•
Audio from CD or MP3 disc•
Audio from USB devices•
Audio from SD/SDHC card•
Audio from iPod/iPhone•
Audio from other external devices•
The unit supports the following media format:
What’s in the box
Check and identify the contents of your
package:
aMain unit
bRemote control
EN

7
d/
Turn the unit on or off.•
Confirm selection.•
Mute or unmute sound.•
Rotate to adjust settings.•
e
Enter iPod/iPhone control mode.•
Overview of the main unit
aFull Sound
Turn on or off Full Sound.•
b
Unlock the panel.•
cBAND/
Select tuner band.•
Return to previous menu.•
sq r
b
a
cd e f g
hjklmopn i
English
EN

8
Overview of the remote
control
aPRESET +/-
Select preset radio station.•
Access manual store.•
bOPTIONS
Access option menu.•
c
Start play.•
Pause or resume play.•
dAUDIO
Access audio setting menu.•
e/
Tune to a radio station•
Skip track.•
Fast backward/forward playback•
fOK
Confirm selection.•
h
g
d
e
f
c
b
n
o
p
q
r
m
k
j
i
l
a
f
Eject disc.•
g
USB socket.•
hMP3 LINK
Connect external audio device.•
i+SONG/FOLDER -
Select preset radio station.•
Search for track/folder.•
Access manual store.•
jOPTIONS/CLOCK
Access option menu.•
View clock.•
k/
Tune for radio station.•
Skip/search for track.•
Fast forward/backward playback.•
lDISP/
Display LCD color.•
Access search mode.•
mMENU/ZONE
Access system menu.•
Access menu for switching the music•
listening zone.
n
 6281'
Turn on or off Maximizing volume•
oEQ AUDIO
Select equalizer (EQ) setting.•
Access audio setting menu.•
pSOURCE
Select audio source.•
qRESET
Restore default settings.•
rSD card slot
sDisc slot
EN

9
3 Get started
Caution
Use the controls only as stated in this user•
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus.The
model number and serial number are on the
bottom of your apparatus.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install the car audio
Please refer to the “Installation guide” in Quick
start guide.
Attach the front panel
1Attach the trim plate.
2Insert the right side of the panel in the
chassis until it is correctly engaged.
gMENU/ZONE
Access system menu.•
Access menu for switching the music•
listening zone.
h/PWR/
Turn the unit on or off.•
Mute or restore volume.•
iVOLUME +/-
Adjust volume.•
jBAND/
Select tuner band.•
Return to previous/top menu.•
kSOURCE
Select audio source.•
l
Enter iPod/iPhone control mode.•
m
 6281'
Select Maximizing volume setting.•
nEQ
Select equalizer (EQ) setting.•
oFull Sound
Turn on or off Full Sound.•
pSONG
Search for track.•
qFOLDER
Search for folder.•
rDISP/
Display LCD color.•
Access Search mode.•
sCLOCK
View clock.•
English
EN

10
Turn on
1Press to turn on the unit.
To turn off the unit, press• for over
3 seconds.
Select country/region
Note
Select correct country/region for this unit,•
otherwise the unit can not work properly.
1Press to turn on the unit.
»[SELECT OPERATING REGION] is
displayed.
2Rotate to select an option:
[USA] (United States)•
[Latin] (Latin America)•
[Europe] (Western Europe)•
[ASIA] (Asia Pacific)•
[Mid-East ] (Middle East)•
[Russia] (Russia)•
3Press to confirm.
3Press the left side of the panel until the
mechanism locks it into place.
Install remote control battery
Caution
Risk of explosion! Keep batteries away from•
heat, sunshine or fire. Never discard batteries
in fire.
Risk of decreased battery life! Never mix
•
different brands or types of batteries.
Risk of product damage! When the remote
•
control is not used for long periods, remove
the batteries.
Perchlorate Material - special handling may
•
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
For first-time use:
1Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1Open the battery compartment.
2Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3Close the battery compartment.
EN

11
4 Listen to radio
Tune to a radio station
1Press SOURCE repeatedly to select radio
mode.
2Press BAND/ to select band: [FM1],
[FM2], [FM3], [AW1] or [AW2] .
3Press or to tune to a radio station
manually.
The radio station is broadcast.»
To search for a radio station»
automatically, press or for over
3 seconds.
Select tuner region
You can select suitable country/region of the
radio.
1Press SOURCE to select Radio mode.
2Press MENU.
3Press /repeatedly until [AREA]
displays.
4Rotate to select:
• [USA]
• [LATIN]
• [Europe]
• [ASIA]
• [M-EAST]
• [RUSSIA]
Select tuner sensitivity
To receive more radio stations or only stations
with strong signal, you can adjust the tuner
sensitivity.
1Press OPTIONS repeatedly to select
[LOCAL SEEK].
Set clock
1Press MENU.
2Press / repeatedly until [CLK SET]
displays.
3Rotate encoder clockwise to set hour.
4Press to confirm.
5Rotate encoder anti-clockwise to set
minute.
6Press to confirm.
View clock
1Press and hold OPTIONS repeatedly
until the clock is displayed.
English
EN

12
Tune to a preset station
1Press BAND/ to select band.
2Press +/PRESET or -/RRESET to select
the preset station.
2Rotate to select a setting:
• [LOCAL SEEK ON]: Only stations
with strong signal can be broadcast.
• [LOCAL SEEK OFF]: Stations with
strong and weak signals can be
broadcast.
Store radio stations in
memory
You can store up to 6 stations in each band.
Store stations automatically
1Press OPTIONS repeatedly until
[AUTO-STORE] displays.
2Press to confirm.
The six strongest stations of the»
selected band are saved in preset
channel automatically.
Store stations manually
1Tune to a station that you want to store.
2Press and hold +/PRESET or -/RRESET to
enter storing mode.
The preset number on LCD screen»
blinks..
3Press +/PRESET or -/RRESET to select
storing location.
4Press to confirm.
The station is saved in the selected»
channel.
The preset number on LCD screen»
lights up and remains on.
EN

13
Play from USB
Note
Ensure that the USB device contains playable•
music.
Insert the USB device
1Slide the USB socket cover marked
to the left.
2Insert the USB device into the USB socket.
The unit starts playing from the USB»
device automatically.
Remove the USB device
1Press to turn off the unit.
2Remove the USB device.
5 Play audio files
Note
Ensure that the disc or device contains playable•
files.
Play a disc
Note
You cannot play CDs encoded with copyright•
protection technologies.
You can play commercially available audio CDs
and these discs:
CD-Recordables (CD-R)•
CD-Re-writables (CD-RW)•
MP3 CDs•
WMA CDs•
Note
Ensure that the disc contains playable content.•
1Insert a CD with the printed side facing up.
Play starts automatically.»
To pause CD play, press• .
To resume CD play, press• again.
To skip to the previous/next track, press•
or .
To search backward/forward rapidly•
within the current track, press or
for 3 seconds.
Remove the CD
To take out the CD, press on the front panel.
Tip
If the disc is blocked in the disc compartment,•
press and hold until the disc comes out.
English
EN

14
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through
this unit.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin
dock connector:
Made for.
iPod nano (2nd generation)•
iPod nano (3rd generation 4GB)•
iPod nano (3rd generation 8GB)•
iPod nano (4th generation)•
iPod nano (5th generation)•
iPod classic (1st generation)•
iPod classic (2nd generation)•
iPod touch (1st generation)•
iPod touch (2nd generation)•
iPod touch (3rd generation)•
iPod video (30GB & 80GB)•
Works with.
iPhone•
iPhone 3G•
iPhone 3GS•
Connect iPod/iPhone
1Slide the USB socket cover marked
to the left.
2Insert USB adaptor on one end of iPod/
iPhone cable to the USB socket on the
main unit.
3Insert the other end of the iPod/iPhone
cable to the iPod/iPhone socket.
The unit starts playing from the USB»
device automatically.
Insert a card
Note
This unit supports SD and SDHC cards.•
1Press to release the panel.
2Push the left side of the panel rightward,
then pull the panel towards you to
disengage it from the chassis.
3Insert the card into the card slot.
The unit starts playing from the card»
automatically.
Remove the card
1Press to turn off the unit.
2Press the card until you hear a click sound.
The card is now disengaged.»
3Remove the card.
EN

15
Search for an MP3/WMA track
1Press SOURCE repeatedly to select iPod
mode.
2Press BAND/to browse iPod/iPhone
menu.
3Rotate to select the Artist search
mode, and press to confirm.
4Press DISP/to search alphabetically.
5Rotate to select desired artist, then
press to confirm.
6Rotate to select desired song in
current album.
7Press to start play.
Note
User cannot control the music via iPod/iPhone•
under audio control mode.
Search for an MP3/WMA
track on iPod/iPhone
Search within the current folder
1Press +SONG.
The name of the current track displays.»
2Rotate to select another track in
current folder
3Press to confirm.
Search in other folder
1Press FOLDER -.
The name of the current folder displays.»
2Rotate to navigate through all folders.
3Press to access the selected folder.
4Rotate to select a track in the folder.
5Press to start play.
Tip
To go back to upper level of a folder, press• .
Control music playback on iPod/
iPhone
1Ensure that the iPod/iPhone is connected
correctly.
2Press SOURCE to select iPod USB mode.
3Press repeatedly to toggle between the
two control modes:
• iPod control mode: Use the buttons/
touch screen on iPod/iPhone to
control the music.
• Audio control mode: Use the
control buttons on car audio to
control the music.
To control playback under audio control
mode:
To pause/resume play, press• .
To skip to a track, press• / .
To search during play, press and•
hold / , then release to resume
normal play.
To navigate the menu, press• ,
rotate to select, then press to
confirm.
English
EN

16
Intro play
You can play the first 10 seconds of each track.
1During play, press OPTIONS repeatedly
until [INTRO] displays.
2Rotate to select a setting:
• [INTRO OFF]: Cancel intro play and
start normal play.
• [INTRO FLD]: Start introl play in the
current folder.
• [INTRO ALL]: Play the first 10 seconds
of each track.
Connect external sound
source
1Connect the external sound source to
MP3 LINK socket with a 3.5 mm cable.
2Press SOURCE repeatedly until [MP3
LINK] is displayed.
3Operate the external component (refer
to the instructions supplied with the
external component).
View play information
1During playing, press DISP repeatedly to
view:
Track number and elapsed play time•
Artist•
Album•
Title•
Folder•
File•
Repeat play
1During play, press OPTIONS repeatedly
until [REPEAT] displays.
2Rotate to select a setting.
• [REPEAT ALL]: play all tracks repeatedly.
• [REPEAT TRK]: play current track
repeatedly.
• [REPEAT FLD]: play all tracks in the
current folder repeatedly.
Shuffle play
You can play the tracks in random order:
1During play, press OPTIONS repeatedly
until [RANDOM] displays.
2Rotate to select a setting:
• [RANDOM OFF]: Turn off random
play.
• [RANDOM FLD]: start random play
for all tracks in the current folder.
• [RANDOM ALL]: start random play
for all tracks.
EN

17
Tunr on/off max sound
1Press
 6281'
.
The current setting displays»
»[MAX ON]:The maximum sound
(max sound) function is on.
»[MAX OFF]:The maximum sound
function is off.
Switch music listening zone
Philips’ innovative Zone technology enables
driver or passengers to enjoy music with the
best speakers balance and experience more
vivid spacial effect as the artist is intended to
create.You can switch the music listening zone
from driver to passengers for the best speaker
sound settings in car.
1Press MENU/ZONE over 3 seconds.
The current setting displays»
2Press /to switch the zones:
• [ZONE ALL]
• [FRONT]
• [F. LEFT] (Front left)
• [F. RIGHT] (Front right)
3Press OK to confirm the selection and
exit the menu.
Other sound settings
You can also adjust the preset EQ/Audio settings.
1Press EQ/Audio for 3 seconds.
2Press /repeatedly to select the item
to be adjusted:
• [BASS LEVEL] range: -7 to +7
• [BASS CFQ] (bass center frequency)
range: 60, 80, 100, 200.
• [MIDDLE LEVEL] range:-7 to +7
• [MIDDLE CFQ] (middle center
frequency) range: 0.5k, 1.0k, 1.5k, 2.5k.
6 Adjust sound
Adjust volume
1Turn clockwise/anticlockwise to
increase/decrease volume.
Mute
You can turn off the sound of your audio.
1During play, press .
To resume sound, press• again.
Turn Full Sound on/off
The unit offers a pre-configured sound setting
called FullSound™.The FullSound™ feature
restores sonic details to compressed music and
provides a full sound experience without any
distortion.
1Press Full Sound to toggle the
FullSound™ feature off and on (default).
Select preset equalizer
1Press EQ/Audio.
Current Equalizer setting is displayed.»
2Press EQ/Audio again to select a preset
EQ setting:
• [OPTIMAL] (optimal)
• [FLAT] (flat)
• [POP] (pop)
• [USER] (user)
• [TECHNO] (techno)
• [ROCK] (rock)
• [CLASSIC] (classic)
• [JAZZ] (jazz)
English
EN

18
7 Adjust system
settings
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn on or off this beep sound.
1Press MENU.
2Press / repeatedly until [BEEP]
displays.
3Rotate to select a setting:
• [BEEP ON]: Turn on the beep sound.
• [BEEP OFF]: Turn off the beep sound.
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1Press MENU.
2Press / repeatedly until [BLKOUT]
displays.
3Rotate to select a setting:
• [BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
• [BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
• [BKO OFF] : Never turn off the
screen.
Turn demo mode on/off
1Press MENU.
2Press / repeatedly until [DEMO]
displays.
• [TREBLE LEVEL] range: -7 to +7
• [TREBLE CFQ] (treble center
frequency) range: 10.0k, 12.5k, 15.0k,
17.5k.
• [BALANCE] range: 12L to 12R.
(L= left speaker, R = right speaker)
• [FADER] range: 12R to 12F. (R =
rear speaker, F = front speaker)
• [ZONE DEP] (zone depth) options:
DEPTH 1, DEPTH 2, DEPTH 3,
DEPTH 4.
• [RESUME]: Resume the preset EQ
value to factory default value.
3Rotate to select a value/option.
EN

19
Reset
You can reset the unit to its default setting.
1Detach the front panel.
2Press the reset button by using a ball-
point pen or a similar tool.
Preset adjustments such as preset»
channels and sound adjustments are
erased.
3Rotate to select a setting:
• [DEMO ON] : Turn on the demo
mode. When the unit is idle for
more than 10 seconds, all functions
are displayed.
• [DEMO OFF] : Turn off the demo
mode.
LCD Color
You can change LCD background color.
1Press MENU.
2Press / repeatedly until [LCD
COLOR] displays.
3Rotate to select a setting:
• [DEFAULT] (default setting)
• [COLOR SCAN] (color scan)
• [WHITE] (white)
• [GREEN 1] (green 1)
• [GREEN 2] (green 2)
• [GREEN 3] (green 3)
• [AMBER] (amber)
• [PINK 1] (pink 1)
• [PINK 2] (pink 2)
• [PURPLE 1] (purple 1)
• [PURPLE 2] (purple 2)
• [BLUE 1] (blue 1)
• [BLUE 2] (blue 2)
• [USER COLOR] (user color)
Set user color
1Press MENU.
2Press / repeatedly until [LCD
COLOR] displays.
3Press .
4Rotate to select [USER COLOR].
5Press to confirm.
6Rotate to adjust color of the LCD.
R(red)/G(green)/B(blue)
7Press to exit user color setting mode.
English
EN

20
3Replace the fuse.
Note
If the new fuse gets damaged again, there may•
be an internal malfunction. Consult your Philips
dealer.
Remove the unit
You can remove the unit from the dashboard.
1Detach the front panel.
2Pull out the unit by using the disassembly
tools.
8 Additional
information
Detach the front panel
You can detach the front panel to deter theft.
1Press to release the panel.
2Push the left side of the panel rightward.
3Pull the panel towards you to disengage it
from the chassis.
4Store the panel in the supplied carry case
to protect it from dirt or damage.
Replace fuse
If the fuse is damaged,
1Check the electric connection.
2Buy a fuse that matches the voltage of the
damaged fuse.
EN

21
Compatible USB devices:
USB flash memory: USB 1.1 host with•
interface reading all speed support (1.1,
2.0)
USB flash players: USB 1.1 host with•
interface reading all speed support (1.1, 2.0)
Memory cards (SD / SDHC)•
Supported formats:
USB or memory file format: FAT16, FAT32•
MP3 bit rate (data rate): 32-320 Kbps and•
variable bit rate
WMA V4, V7, V8, V9 (L1, L2)•
ISO9660, Joliet•
Maximum title number: 512 (depending•
on file name length)
Maximum album number: 255•
Supported sampling frequencies: 2 kHz,•
44.1 kHz, 48 kHz
Supported Bit-rates: 2~256 (kbps),•
variable bit rates
Directory nesting up to a maximum of•
8 levels
Number of albums/ folders: CD•
maximum 99, USB maximum 199
Number of tracks/titles: maximum 999•
ID3 tag v2.0 or later•
File name in Unicode UTF8 (maximum•
length 64 bytes)
Unsupported formats:
Empty albums: an empty album is an•
album that does not contain MP3/WMA
files, and is not be shown in the display.
Unsupported file formats are skipped. For•
example, Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
AAC, WAV, PCM audio files•
DRM protected WMA files (.wav, .m4a,•
.m4p, .mp4, .aac)
WMA files in Lossless format•
9 Product
information
Note
Product information is subject to change without•
prior notice.
Power supply 12 V DC (11 V - 16 V),
negative ground
Fuse 15 A
Suitable speaker
impedance
4 - 8
Maximum power
output
50 W x 4 channels
Continuous power
output
24 W x 4 RMS
(4 10% T.H.D.)
Pre-Amp output
voltage
2.0 V
Aux-in level 500 mV
Dimensions (W x
H x D)
188 x 58 x 201 mm
Weight 1.47 kg
Radio
Frequency range
- FM
87.5 - 108.0 MHz (100kHz
per step in auto search and
50kHz per step in manual
search)
Frequency range
- AM (MW)
522 - 1620 KHz (9 kHz)
530 - 1710 kHz (10 kHz)
Usable sensitivity
- FM
8 μV
Usable sensitivity
- AM (MW)
(S/N = 20 dB)
30 μV
English
EN