Philips CT 9A9R User manual

Discover Your Phone How to...
Pick up key
Microphone
Screen
Navigation keys
Hang up, cancel
and on/off key
Headset/charger
connector
Left softkey
Right softkey
Alphanumeric
keypad
Switch the phone
On/Off
Long press ).
Enter your PIN
code
Enter your PIN code using
the keypad and press ,or C
to confirm.
Lock the keypad Press *. The keypad
will be locked automatically
when the flip is closed
(whether or not the keys on
the phone's flip will also be
locked shall depend on the
settings you have made).
When the flip of the phone
is opened, the keypad will be
unlocked automatically,
while the keyson the phone's
flip will be locked.
Unlock the keypad Press Cand then press *
to unlock.
Make a call Enter the phone number
using the keypad and press
(.
Philips_XRazr.book Page 0 Tuesday, October 17, 2006 6:47 PM

1
End a call Press ).
Answer a call When the phone rings, press
(.
Activate/deactivate
handsfree mode
In idle mode, enter the
phone number using the
keypad or select a contact
in the phonebook.
Press ,or COptions, then
select call handsfree and
press ,.
During a call, press ,, or C
Options to access the
handsfree option.
When there is an incoming
call, long press (.
Mute a call When the phone rings, press
c.
Reject a call When the phone rings, press
).
Set the
conversation
volume
Press volume side keys to
adjust the volume during
acall.
Set the ringer
volume
When the phone is in idle
mode, press volume side keys
to adjust the ring volume of
an incoming call.
Access dialed calls
list
Press (in idle mode.
Access WAP
browser
Press +in idle mode.
Access Contacts Press -in idle mode.
Access My Files Press <in idle mode.
Access Write SMS Press >in idle mode.
Access Main Menu Press ,or Cin idle mode.
Access MP3 Press cin idle mode.
Go to previous
menu
Press c.
Quickly return to
idle when browsing
menus
Short press ).
Philips_XRazr.book Page 1 Tuesday, October 17, 2006 6:47 PM

2
Softkeys
The left and right soft keys ( Cand c) are located
at the top of keypad area. Pressing the soft keys allows
you to select the option displayed on the screen
directly above them, including options during a call.
The functions of the soft keys change according to the
current context.
Main menu
You can access the different features of your Philips
XRazr phone from the main menu. The following
table summarizes the structure of the Main menu,
what the icons represent and the page number on
which you can obtain more information regarding
the menu functions.
Entertainment Browser Music Player
page 22 page 23 page 26
Camera Messages My Files
page 30 page 36 page 45
Tools Contacts Profiles
page 50 page 61 page 66
Connectivity Calls Settings
page 68 page 70 page 73
Philips_XRazr.book Page 2 Tuesday, October 17, 2006 6:47 PM

3
Press ,in idle mode to access the main menu and
press +, -, <or >to navigate through the icons and
lists, or press 0- 9keys, and *or #keys
to access the options and functions directly.
When navigating through a list, the scrolling bar
onthe right of the screen will indicate your current
position in the list. Press CSelect or ,to access the
corresponding options of the selected item in the list.
Press cBack to return to the previous menu.
How to use this manual
This user manual strives to provide you with concise
and complete information regarding your Philips
XRazr phone.
Discover
your phone
The current section presents an
overview of your mobile phone and
information on the most commonly
used features.
Chapter 1:
Getting
started
Information on how to set up
your mobile phone for the first time:
installation of the SIM card, battery,
etc.
Chapter 2:
Main
features
How to make and answer calls,
as well as some frequently used
call functions.
Chapter 3:
Text entry
How to enter text using the
alphanumeric keypad.
Chapter 4
to 15
Description of the main features
of this phone.
Other
sections
Icons & Symbols,
Precautions, Troubleshooting,
Philips Authentic Accessories, SAR
information (if available at the time
of publication, otherwise included
as a separate document), and finally
the Limited Warranty information.
Philips_XRazr.book Page 3 Tuesday, October 17, 2006 6:47 PM

4
Table of contents
1. Getting Started ............................................7
Inserting the SIM card ......................................7
Switching on the phone ...................................9
Charging the battery ........................................9
Setting Hotkeys .............................................. 10
2. Calling ............................................................. 11
Switch on the phone ..................................... 11
Switch off the phone ..................................... 11
Make a call ....................................................... 11
Options during a call ..................................... 11
Mute or unmute a call ................................... 12
Adjust speaker/earpiece volume ................ 12
Call recording ................................................. 12
End a call .......................................................... 12
Make an international call ............................ 12
Make a second call (Network dependent) 13
Switch calls (Network dependent) ............ 13
Call Handsfree ................................................ 13
Answer a call ................................................... 13
Reject a call ..................................................... 13
Answer a second call (Network
dependent) ...................................................... 13
Fotocall ............................................................. 14
3. Text and number entry ...................... 15
Input method .................................................. 15
Entering texts and numbers ........................ 15
Entering symbols ............................................ 16
Shift case .......................................................... 16
Delete ............................................................... 16
T9®English input ........................................... 16
Basic text input ............................................... 17
Pinyin Input ...................................................... 18
Zhuyin Input .................................................... 19
Stroke input .................................................... 20
4. Entertainment ........................................... 22
Games .............................................................. 22
Demo mode .................................................... 22
5. Browser ........................................................ 23
WAP settings .................................................. 23
Push Inbox ....................................................... 25
6. Music ............................................................... 26
Tracks ............................................................... 26
Artists ............................................................... 26
Playlists ............................................................. 27
Last played ....................................................... 27
Philips_XRazr.book Page 4 Tuesday, October 17, 2006 6:47 PM

5
Now playing .................................................... 27
Settings ............................................................. 28
Using the music player control keys
on the flip ......................................................... 28
7. Camera .......................................................... 30
Camera mode ................................................. 30
Video mode ..................................................... 32
8. Messages ....................................................... 36
SMS .................................................................... 36
MMS (network dependent) ......................... 37
Inbox ................................................................. 38
Outbox ............................................................. 39
My favourites ................................................... 40
Draft .................................................................. 40
SIM archive ...................................................... 41
Templates ........................................................ 41
Voice mailbox ................................................. 41
Cell broadcast ................................................. 42
Message Setting .............................................. 43
9. My Files .......................................................... 45
Pictures ............................................................. 45
Videos ............................................................... 46
Audios ............................................................... 48
Memory capacity ............................................ 49
10. Tools ............................................................ 50
Lady’s planner ................................................. 50
Calendar ........................................................... 57
Alarm ................................................................ 58
Calculator ........................................................ 58
Voice recorder ............................................... 58
International clock ......................................... 59
Stop watch ....................................................... 59
Unit converter ................................................ 59
Countdown ..................................................... 60
11. Contacts .................................................... 61
Create contacts .............................................. 61
View groups .................................................... 63
Special numbers ............................................. 63
Quick call ......................................................... 64
Advanced ......................................................... 64
12. Profiles ........................................................ 66
Profile selection .............................................. 66
Personalise settings ....................................... 66
13. Connectivity ............................................ 68
Bluetooth ......................................................... 68
USB function ................................................... 69
PC software .................................................... 69
Memory card .................................................. 69
Philips_XRazr.book Page 5 Tuesday, October 17, 2006 6:47 PM

6
14. Calls .............................................................. 70
Call history ...................................................... 70
Clear history ................................................... 70
Call settings ..................................................... 70
15. Settings ........................................................ 73
General ............................................................. 73
Display .............................................................. 75
Sounds .............................................................. 75
Connectivity .................................................... 76
Icons & symbols ............................................. 78
Precautions ....................................................... 79
Troubleshooting ............................................ 83
Philips Authentic Accessories .............. 85
Trademark Declaration ............................ 86
SAR Information - International ......... 87
Limited warranty .......................................... 88
Declaration of conformity ...................... 91
Philips_XRazr.book Page 6 Tuesday, October 17, 2006 6:47 PM

7 Getting Started
1. Getting Started
Please read the safety instructions in the "Precautions"
section before use.
Before you start using your phone, you must insert
a valid SIM card supplied by your GSM operator
or retailer. The SIM card contains your subscription
information, your mobile telephone number, and
a small quantity of memory in which you can store
phone numbers and messages (for more information,
see “Contacts” page 61).
You can also insert a memory card. This provides
you with expanded memory capability, which allows
you to store additional music, photo, and video files
separate from the phone's built-in memory.
Inserting the SIM card
Remove the back cover
Make sure that the phone is switched off. You need to
remove the back cover and the battery of your phone
before you can insert the SIM card. Hold the phone
with the front facing downwards as illustrated in the
diagram and push the back cover in the direction as
shown.
Lift up the back cover from its slot.
Remove the battery
Put your finger on the black holder located at the top
of the battery and lift the battery up from its slot.
You may lose all your personal settings if you remove
the battery when the phone is switched on.
Philips_XRazr.book Page 7 Tuesday, October 17, 2006 6:47 PM

Getting Started 8
Insert the SIM card
Make sure that the clipped corner of the SIM card
is facing the correct direction (clipped corner at upper
left) and the metallic contacts are facing downwards.
Slide the SIM card into the card slot until it stops.
When you remove your SIM card from its holder,
make sure that you smoothen the edges, otherwise
you may have difficulty sliding the card into the SIM
slot.
Replace the battery
With the metallic contacts facing downwards, insert
one side of the battery into the slot and press it down
to lock it into place.
Replace the back cover
Align and slide the back cover into its slot as shown
until it locks into place.
When inserting the battery, be careful not to damage
the metallic connectors of the SIM card slot
Philips_XRazr.book Page 8 Tuesday, October 17, 2006 6:47 PM

9 Getting Started
When the phone is switched on without a SIM card,
users can access the main menu by pressing ,or C,
or make SOS emergency number via cor (.
Switching on the phone
To switch on the phone, long-press the )key.
Enter the PIN code if required (the 4 to 8 digit
secret code of your SIM card). It is preconfigured and
provided to you by your network operator or retailer.
For more information on PIN code, see “Security” on
page 74.
If you enter an incorrect PIN code 3 times in
succession, your SIM card will be blocked. To unblock
it, you must obtain the PUK code from your network
operator.
Charging the battery
Your phone is powered by a rechargeable battery. The
new battery is partially charged. A sound alert will be
emitted to warn you when the battery level becomes
low.
We recommend that you do not remove the battery
when the phone is switched on as you may lose all your
personal settings as a result. If you do remove it, the
date and time settings are only memorized for a short
while. As such, you need to reset the information after
you have installed the battery back again.
Once the battery and battery cover are installed, you
can charge the phone. Plug in the connector as shown
below. Then plug the other end into an AC power
socket.
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll;
it takes around 2.5 hours to fully charge the battery.
When all the scroll bars are steady, the battery is fully
charged. You can then disconnect the charger.
Depending on the network and condition of use,
talk time and stand-by time can go up to 10 hours*
and 1000 hours* respectively.
Philips_XRazr.book Page 9 Tuesday, October 17, 2006 6:47 PM

Getting Started 10
*Depending on the network conditions, user settings,
method of use, etc the actual results may differ.
Keeping the charger plugged to the mobile phone when
the battery is fully charged will not damage the
battery. The only way to turn off the charger is to
unplug it, so it is advisable to use an easily accessible
AC power socket.
If you do not intend to use your phone for several days,
we recommend that you remove the battery.
You can use the phone while it is charging (note that
the vibra alert goes off when the charger is connected).
If the battery is completely flat, the battery icon will
only reappear after a few minutes of charging.
Setting Hotkeys
You can configure the numeric keys 2- 9to
access your favorite features. Once they have been
set, you can simply long press on the numeric key
to access the corresponding features.
Majority of the hotkeys have been preset and
configured. To check the hotkey settings, go to
Shortcuts > Hotkey. To change the hotkey setting,
press the numeric key you wish to change and select
Options > Personalise, then select a feature to be
associated with the numeric key from the following
list:
Numeric keys 0, 1, #and *have been
preconfigured as the default keys to enter "+", access
voice mailbox, activate Meeting profile and change
language settings, respectively, and cannot be
modified.
• Alarm • Bluetooth
• Calendar • Calculator
•VoiceMemo •Firewall
• Inbox • Language
Philips_XRazr.book Page 10 Tuesday, October 17, 2006 6:47 PM

11 Calling
2. Calling
Although your Philips X Razr mobile phone supports
a wide variety of functions, such as taking pictures,
recording videos and sound, sending and receiving
of SMS/MMS, etc, it is first and foremost a mobile
phone. This chapter describes the features and options
related to making and receiving calls.
Switch on the phone
Long press )to switch on the phone.
You may set a security code (PIN code) on your
phone to protect it from unauthorised use. When you
have set a security code, you will be prompted to enter
the corresponding security code when you switched
on the phone.
1. Enter the PIN code. For security reasons, the
screen will display “*” to represent the numbers
you have entered. If you have entered the wrong
number, press cClear to clear it.
2. Press COK. The phone will validate the PIN
code and commence network registration.
3. Once a network name is displayed on the screen,
you are ready to make or answer a call. If there is
no network name on the screen, you need to
reregister.
If you enter a wrong PIN code 3 times in succession,
your SIM card will be blocked. To unblock it, you
must request the PUK code from your operator. If you
enter a wrong PUK code 10 times in succession, your
SIM card will be permanently blocked and cannot be
used anymore. If this happens, please contact your
network operator.
Switch off the phone
At all times, you can long press )to switch off the
phone.
Make a call
You can make a call only when the network name
appears on the screen.
1. Enter the phone number.
2. Press (to dial the number.
Options during a call
During a call, you can press COptions to carry out the
following operations:
- Activate/cancel handsfree
- Activate bluetooth headset
- Mute/Unmute the call
Philips_XRazr.book Page 11 Tuesday, October 17, 2006 6:47 PM

Calling 12
- Put the call on hold
- Dial a new number
- End the current call
-AccessMain Menu
- Record phone conversation (which includes 3
sub-options: Record both, Record the opposite
party and Record own)
-AccessContacts list
Mute or unmute a call
During a call, press COptions and select Mute or
Unmute. If you select Mute, the microphone will be
deactivated.
When you switch from one call to another, muting
will be cancelled.
Adjust speaker/earpiece volume
During a call, call on hold or call waiting, you can
press +/-to increase or decrease the volume (if you
are not browsing the call options menu).
When the volume has been set, the call volume
will take effect immediately and the settings will be
applied to your subsequent calls.
Call recording
During a call, press COptions and select Record to
access the 3 recording options; namely, Record both
(default), Record the opposite party and Record own
(applicable to two-party calls or multi-party calls).
When you start recording, a recording icon will
appear on the screen. When you end the call, the
recording will stop and saved automatically in AMR
format under My Files > Audio.
There is no limit to the length of the recording; the
recording will stop only when you press ckey to stop
the recording, when there is insufficient memory, or
when the call has ended.
End a call
Press cEnd or )to end a call.
Make an international call
1. Long press 0until "+"appears on the screen.
2. Enter the country code.
3. Enter the area code (normally without the 0 in
front), followed by the phone number.
4. Press (to call directly.
Philips_XRazr.book Page 12 Tuesday, October 17, 2006 6:47 PM

13 Calling
Make a second call (Network
dependent)
You can make a second call by putting the current call
on hold:
1. During a call with Party A, you can enter Party's
B number using the keypad.
2. Press (to dial Party B's number. Party A will be
put on hold automatically.
Switch calls (Network dependent)
When you have one active call and one call on hold,
you can press COptions, then select Swap to switch
between the 2 calls.
Call Handsfree
During a call, press COptions and select Hands free.
When the headset is plugged into the phone, you
cannot activate handsfree mode.
Answer a call
Press (to answer a call.
Reject a call
Press )to reject a call.
Answer a second call (Network
dependent)
If you have activated Call waiting, you will be alerted
when there is a second incoming call. You can:
1. Press (to answer the second call. The current
call will be put on hold automatically.
2. Press )to reject the second call and continue
with your current call.
3. When there is one active call and one call on
hold, you can press COptions to carry out the
following operations:
If you press the numeric keys *or #under call
waiting mode, the notepad editor will be activated.
• Swap • Conference call • Hands free
• Bluetooth headset • Mute • Holding
• End all calls • End call • Send SMS
• Record • View contacts
Philips_XRazr.book Page 13 Tuesday, October 17, 2006 6:47 PM

Calling 14
Fotocall
This feature allows you to link a contact in your
phonebook to a photo you have taken using the
Camera function, or a picture you have downloaded
via WAP or data cable. During a call, if the other
party's name card is linked to a picture, the incoming
call background will display the corresponding
picture. This feature is referred to as "Fotocall".
Fotocall is only available on the phone memory. The
photo size should not be larger than 128 x 160 pixels.
Philips_XRazr.book Page 14 Tuesday, October 17, 2006 6:47 PM

15 Text and number entry
3. Text and number entry
Input method
Your mobile phone supports several input methods,
which include:
*During text editing, you can press *to switch
input mode; the status bar on the screen will display
your current input mode. 『拼』 represents
Simplified Chinese Pinyin input mode; 『笔』
represents Simplified Chinese stroke input mode;
『ㄅㄆ』 represents Traditional Chinese BoPoMo
input mode; 『筆』 represents Traditional Chinese
stroke input mode; 『en』represents T9 English
input mode; 『abc』represents English alphabets
input mode; 『123』represents numeric input
mode. In addition, you can press # to input
punctuations."
The text editor remembers the last input method you
have used before you exit the editing screen. When you
access the editor again, it will automatically select the
last input method you have used.
Entering texts and numbers
You can input text in the editor using: T9 English
input, English alphabets, Pinyin, Zhuyin, Simplified
Chinese Stroke or Traditional Chinese Stroke. In
addition, there are two input methods for you to enter
numbers and punctuations. The icon displayed on the
screen shows the current input method. You can press
• T9 Pinyin: Enter chinese characters with T9
Pinyin;
• T9 Traditional Chinese Zhuyin: Enter
Traditional Chinese characters with T9
Zhuyin;
• T9 Stroke: Enter Chinese characters with T9
wubi and stroke components;
• T9 Traditional Chinese stroke: Enter
Traditional Chinese characters with Wubi or
stroke components;
• T9 English (T9eng/T9Eng): Enter English
text using T9 English;
• Multi-Tap (abc/ABC): Press the keys that are
marked with the corresponding letter you
wish to enter. Press once to get the first letter
on the key, press twice quickly to get the
second letter and so on until the letter you
want is displayed on the screen.
• 123: Enter numbers
This phone supports T9 Simplified Chinese
association input method as well.
Philips_XRazr.book Page 15 Tuesday, October 17, 2006 6:47 PM

Text and number entry 16
*to switch from one mode to another. Long press
is required under Zhuyin mode. Long press #to
enter punctuations or press 0to switch case.
In numeric input mode, long press 0to enter ".".
Entering symbols
In any input mode, press #to open/close symbols
input screen. Press the corresponding number on the
left of the symbol to input it and then return to the
original input mode. If the symbols occupy more than
one screen, press +/-to scroll up/down the pages.
Shift case
Press 0to shift case in the English input editor.
Delete
When there are contents in the input row, press c
Clear to delete the rightmost character or symbol. The
candidate area will be updated accordingly until the
input row is cleared. Long press cClear to clear the
input row.
When the input row is empty, press cClear will
delete the character on the left of the cursor in the text
area. If there are no characters on the left of the cursor,
the character on the right will be deleted. Long press
cClear to clear the contents in the text area.
T9®English input
What is it?
T9®predictive Text Input is an intelligent editing
mode for messages, which includes a comprehensive
dictionary. It allows you to quickly enter text. You
need to press only once on the key corresponding to
each letter needed to spell a word: keystrokes input are
analysed and the word suggested by T9®is displayed
at the bottom of the screen. If there are several words,
press <or >to browse the list and choose from those
proposed by the T9®built-in dictionary (see example
below). After you have input the word, press 1or >
to insert space.
How to use it?
Alphabets and symbols represented by each key are as
follows:
0to 9To input letters.
<or >To browse the last or next
candidate word.
COK To confirm the letter or word.
Philips_XRazr.book Page 16 Tuesday, October 17, 2006 6:47 PM

17 Text and number entry
Example: How to enter the word "Home"
1. Press 4663, the screen display the
first word on the list: Good.
2. Press >to browse and select Home.
3. Press COK to confirm Home.
Basic text input
If you wish to use basic text input mode, press *to
select "ABC" basic text input. This method requires
multiple key presses to reach the desired character: the
letter "h"is the second letter on the 4key, so you
must press 4twice to enter "h". Using this mode
requires you to press a key as many times as is equal
to the order of the letter.
To enter the word «Home» in basic text input mode,
you should therefore key 4, 4(GHI) 6, 6,
6(MNO), 6(MNO), 3, 3(DEF).
Letters, numbers and symbols are located on each key
as follows:
cClear Short press to clear a letter, long
press to clear all entries.
0Shift case.
*Select input mode.
#Activate/deactivate punctuation
mode.
Key Letters and numbers
1Space 1
2a b c 2 à ä å æ ç
3d e f 3 e e ΔΦ
4g h i 4 Γì
5j k l 5 Λ
6m n o 6 ñ ò ö ø
7p q r s 7 βΠΘΣ
8t u v 8 ü ù
9w x y z 9 ΩΞΨ
0Shift case
*Switch text input mode
#Input symbol
Philips_XRazr.book Page 17 Tuesday, October 17, 2006 6:47 PM

Text and number entry 18
Pinyin Input
Press *and select Pinyin input mode. Each Pinyin
letter is represented by one of the numeric keys as
shown below: (Note that Pinyin input mode is solely
meant for the input of Simplified Chinese characters.
You cannot input Traditional Chinese characters).
The general steps of using Pinyin input method are as
follows:
Enter the pinyin letters accordingly. Press once on the
key corresponding to the pinyin letter without having
to consider its position on the key. Pinyin input
method will automatically select and list all possible
combinations for you to select.
12ABC 3DEF
4GHI 5JKL 6MNO
7PQRS 8TUV 9WXYZ *
*Mode 0#Punctuation
1. Enter Pinyin letters 2to 9
cClear to clear
2. Select Pinyin combination <or >
3. Confirm Pinyin
combination ,
4. Select from candidate list <or >/ +or -
(scroll list)
5. Confirm selection ,
6. Select and enter association character, or return
to step 1 to enter new words.
7. Or press cExit to exit from association
character input mode, then press ,to
complete the editing.
Philips_XRazr.book Page 18 Tuesday, October 17, 2006 6:47 PM

19 Text and number entry
For example, to input the character『王』, with the
Pinyin letters『wang』, press 9264and
use >to select the desired pinyin combination for
『wang』, then press ,to confirm combination.
After that, you may press a number key to enter the
intonation of the character (1-1 tone, 2-2 tone, 3-3
tone, 4-4 tone, 5- silent tone) to narrow down the
candidate characters selection range. Then press >
to select the desired character 『王』 and press ,
to confirm the input of this character.
As soon as you have selected and entered a character,
the candidate list will be updated and a list of
association characters will be displayed. Press <or >
to select the desired association character and press ,
to confirm entry. This speeds up the input process
further.
When you have finished editing a name on the
phonebook or SMS, press cExit to exit from
association character input mode and press ,to
confirm completion of the editing process.
Zhuyin Input
T9 Traditonal Chinese Zhuyin
Input
Press once on the key corresponding to the Zhuyin
character without having to consider its position on
the key. All the possible Zhuyin combinations will be
listed on the input row.
Characters located on each key 0- 9are as
follows:
Key Characters
1ㄞㄍㄐ
2ㄓㄢㄅㄉ
3｜ㄗㄦㄚ
4ㄠㄎㄑㄟ
5ㄔㄣㄊㄆ
6ㄨㄘㄛ
7ㄡ ㄒ
8ㄕㄤㄋㄇ
Philips_XRazr.book Page 19 Tuesday, October 17, 2006 6:47 PM