Philips CTE102BLK/40 User manual

1
Discover your phone
Philips continuously strives to improve its products. Therefore,
Philips reserves the rights to revise this user guide or withdraw it
at any time without prior notice. Philips provides this user guide "as
is" and does not accept, except as required by the applicable law,
liability for any error, omission or discrepancy between this user
guide and the product described. The device is meant to be con-
nected to GSM/GPRS networks.
Left soft key
Navigation key
OK key
Pick-up key
Charger
LCD display
Right soft key
Hang-up key/
Power on/off
Alphanumeric
keypad
Microphone
Built-in antenna
*Avoid blocking the area

2
Getting Started
Inserting the SIM card
Charging the battery
12
34

3
How to...
Switch the phone on/
off
Long press).
Unlock the keypad PressR, and then, *.
Lock the keypad Long press *. To set an idle time
span for the keypad to be locked, go to
LMenu > Settings > Auto keypad lock.
Make a call Enter the phone number using the key-
pad and press (.
Make an emergency
call without a SIM
card
Press R SOS on idle screen.
Answer a call When the phone rings, press (.
End a call Press ).
Access Contacts PressRContacts on idle screen. You
can search for and edit a contact, make
a call or send a message.
Select text entry
methods
Press #repeatedly.
Access the main
menu
Press LMenu on idle screen. Press +,
-, <, >to navigate through the menus.
Press , to select.
Quickly return to idle
when browsing
menus
Press ).
Vibration on/off
(Meeting profile on/off)
Long press #on idle screen.

4
Silent on/off Go to LMenu > Profiles. Select and
activate Silent profile.
Select ringtones and
adjust ring volume
Go to LMenu > Profiles. Select your
desired profile (other thanMeeting and
Silent) Go to Edit to select your options.
Select Activate to activate the profile.
Check call history Go to LMenu > Call log.
Browse the Internet Go to LMenu > WAP.
To receive push mes-
sages (specially format-
ted SMS messages that
contain a URL).
Go to LMenu > WAP > WAP profile >
Retrieve push message. Select Activate. To
check push messages, go to LMenu >
WAP > Push message inbox.
Play games Go to LMenu > Fun > Games.
STK Go to LMenu > Fun > STK (depend-
ing on whether your SIM card supports
STK).
Use calculator Go to LMenu > Tools > Calculator.
Access FM radio Plug the supplied earphone into your
phone and go to LMenu > Tools > FM
radio.
Make a list of impor-
tant things
Go to LMenu > Tools > Memo.
Select an image as the
wallpaper of your
phone
Go to LMenu > Settings > Display set-
tings > Set wallpaper.
Select the duration of
backlight
Go to LMenu > Settings > Display set-
tings > Backlight.

5
Select the duration of
keypad backlight
Go to LMenu > Settings > Display set-
tings > Keypad backlight.
Set a navigation key
as direct access to a
menu
Go to LMenu > Settings > Set short-
cuts. Press LChange to change cur-
rent settings.
Set PIN password
protection for your
SIM card
Go to LMenu > Settings > Security set-
tings > PIN.
(The default PIN is provided by the net-
work operator. )
Set password protec-
tion for your phone
Go to LMenu > Settings > Security set-
tings > Phone lock.
(The default phone lock password is
123456)
Restore factory
settings
Go to LMenu > Settings > Restore
factory settings.

6
Text entry
1. Press #repeatedly to select your desired inputs.
: for Smart English entry
/: for multi-tap English entry
: for Smart Thailand entry
: for multi-tap Thailand entry
: for numeric entry.
2. Press *to enter a symbol and punctuation.
3. Press 0to enter a space.
Smart English input ()
You need to press only once on the key corresponding to each let-
ter needed to spell a word: keystrokes are analyzed and the word
suggested is displayed at the pop-up window.
Example: how to enter the word "home":
1. Press 4 , 6 , 6 , 3 .
The screen displays the first word of a list: Good.
2. Press >to scroll and select Home.
3. Press L OK to confirm.
Multi-tap input (/)
Press repeatedly on the key corresponding to each letter, until the
desired character appears.
Example: how to enter the word "home":
Press 4 , 4 (GHI) 6 , 6 , 6 (MNO), 6 (MNO), 3 ,
3 (DEF).

7
Call settings
Speed dial
On the idle screen, you can call a preset speed dial number by long
pressing a numeric key (2to 9). To assign a speed-dial
key to a contact, go to Contacts > Speed dial.
Blacklist
You can reject calls from certain contacts.
Go to Contacts > Contacts manager > Firewall to edit your blacklist, and
turn on the function.
Handle multiple calls (network-dependent)
1. Go to Menu > Settings > Call settings . Activate call waiting, and
deactivate call divert.
2. Make a second call
During an active call, enter the number or select a contact, and
press (.
Answer a second call
During an active call, press (.
Messages
Write and send SMS
1. Go to Menu > Messages > SMS > New SMS.
2. Write your message. To use templates, press L OK > Add
template.
3. To send the message, press L OK > Send.
Read and reply to SMS
Go to Menu > Messages > SMS > Inbox. Press L
Options > View to read current message, and L
Options > Reply to reply to current message.

8
Write and send MMS
1. Go to Menu > Messags > MMS > Create MMS.
2. To add recipients, select To, Cc and/or Bcc, and press ,to
enter phone number or E-mail.
3. To edit contents, select MMS Content and press ,. Press
L Options to select your editing options.
Read and reply to MMS
Go to Menu > Messages > MMS > Inbox. Press L
Options > Play to play current message, and L
Options > Reply MMS or Reply by SMS to reply to current message.
Contacts
Add a new contact
You can save contacts on phone or SIM card. For contacts on the
phone, you can add detailed information, like home number, office
number, and group.
1. Go to Menu > Contacts > New contact. Select a storage location:
To SIM or To phone.
2. Enter your information, or press LEdit
To select a group, press >repeatedly.
Search for a contact
In Contacts > Contact list. Enter contact name. To select input meth-
ods, press #repeatedly.
Group your contacts on the phone
1. Go to Menu > Contacts > Groups.
2. Select a desired group. To add a group member, press L Select
> Member list > Add. To set group ringtone, press L Select >
Ringtone.

9
FM radio
Tune to a radio station
To tune to a radio station, always plug the supplied earphone into
your phone.
•Auto tune:
In Tools > FM radio, press LOptions > Tuning > Auto search.
The radio frequency scanning starts automatically. Up to 20 avail-
able radio stations are saved to Channel list. The last radio station
starts to play.
•Manual tune:
In Tools > FM radio, press LOptions > Tuning > Manual search.
On the radio playback screen, press <or >to tune to the next
available station.
To save the current available station,
1. Press LSave to access the channel list, and select a location
for the current station.
2. Press LOptions to select Save current channel.
3. Enter the station frequency, and press LOK to save.
Press #to switch the input method. Press *to input the
symbol.
•Inching tune:
In Tools > FM radio, press LOptions > Tuning > Inching search.
On the radio playback screen, press <or >repeatedly for fine tun-
ing.
Edit the channel list
1. In Tools > FM radio, press LOptions > Channel list to select a
location for your preset.
2. Press LOptions > Edit:
Channel name: Name or rename the channel.
Frequency: Enter your desired frequency.

10
Listen to a radio station
1. Go to Tools > FM radio, and press LSelect.
The last played station starts to play.
2. On the radio playback screen,
To adjust the volume, press +or -.
To turn off the radio, press LOptions > Turn off radio.
To listen to the radio through the speaker, press LOptions >
Play through speaker.
Clock
To set the clock
1. Check that your phone is switched on. Long press )if nec-
essary.
2. On idle screen, press L Menu > Settings > Date & time.
To adjust clock time in a different time zone
1. Go to Tools > World clock.
2. Press < or > to select a city, and then press L Options > Set as
local.
Alarm
To set an alarm, go to Menu > Tools > Alarm. Select an alarm and
press L Options > Activate (Edit).
To turn on/off an alarm, go to Menu > Tools > Alarm. Select an
alarm and press L Options > Activate/Deactivate.
When the alarm rings,
Press L Stop. The alarm stops. It will sound again at the set time
if you have selected a repetition mode.
Press RSnooze. The alarm will sound again five minutes later.