Philips HD8651 User manual

Register your product and get support at
www.philips.com/welcome
Always here to help you
HD8651

1

HD8651
ENGLISH 6
DEUTSCH 29
ITALIANO 53

6
Table of contents
Introduction 6
General description 7
Important 7
Danger 7
Warning 7
Caution 8
Electromagnetic elds (EMF) 8
Before rst use 8
Installing the machine 8
Preparing for use 9
Filling the water tank 9
Filling the coffee bean container 10
Heating up the machine 10
Manual rinsing cycle 11
Installing the Intenza+ water lter 12
Using the machine 13
Brewing 1 or 2 cups of espresso or regular coffee 13
Frothing milk 14
Hot water 15
Adjusting the machine 16
Adjusting the grinding degree 16
Adjusting the coffee volume 16
Cleaning and maintenance 17
Cleaning the hot water/steam wand or classic milk frother 17
Cleaning the brewing unit 17
Lubrication 20
Descaling the machine 20
Descaling procedure 21
Preparation 21
Descaling cycle 21
Rinsing cycle 22
If you are unable to nish the descaling procedure 23
Meaning of light signals 23
Recycling 26
Guarantee and support 26
Ordering maintenance products 26
Troubleshooting 26
Technical specications 28
Introduction
Congratulations on buying this fully automatic Philips Xsmall espresso
machine! To fully benet from the support that Philips offers, please register
your product at www.philips.com/welcome.This user manual applies
to HD8651. The machine is suitable for preparing espresso coffee using
whole coffee beans. It can also dispense steam and hot water. In this user
manual you nd all the information you need to install, use and maintain
your machine.
ENGLISH

General description (Fig. 1)
1 Control panel
2 Steam icon
3 Control dial
4 Coffee bean icon
5 Espresso button
6 Regular coffee button
7 Hot water icon
8 Descaling light
9 Warning light
10 2-cup light
11 ’Water tank empty’ light
12 On/off button with light
13 Hot water/steam wand
14 Protective handle
15 classic milk frother (specic types only)
16 Water tank
17 Coffee spout
18 Drip tray cover
19 ’Drip tray full’ indicator
20 Drip tray
21 Coffee grounds container
22 Brewing unit
23 Maintenance door
24 Grinding degree adjustment knob
25 Ceramic coffee grinder
26 Coffee bean container
27 Grinding degree adjustment tool
28 Lid of coffee bean container
Important
Read and follow the safety instructions carefully and only use the machine
as described in this user manual to avoid accidental injury or damage
due to improper use of the machine. Keep this user manual for future
reference.
Danger
-Never immerse the machine in water or any other liquid.
- Never direct the steam wand at the body as this causes scalding.
- Never insert body parts or objects into the coffee grinder.
Warning
- Check if the voltage indicated on the machine corresponds to the local
mains voltage before you connect the machine.
- Connect the machine to an earthed wall socket.
- This machine can be used by children aged from 8 years and above
and by persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the machine in a safe way and if they
understand the hazards involved. Cleaning and user maintenance shall
not be made by children unless they are older than 8 and supervised.
Keep the machine and its cord out of the reach of children aged less
than 8 years.
ENGLISH 7

-Children shall not play with the machine.
- This machine is designed to grind beans and brew coffee. Use it
correctly and with care to avoid scalding by hot water and steam.
-Do not pour liquids on the mains cord connector.
- Do not use the machine if the plug, the mains cord or the machine
itself is damaged.
- If the mains cord is damaged, you must have it replaced by Philips,
a service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
Caution
- Always return the machine to a service centre authorised by Philips for
examination or repair. Do not attempt to repair the machine yourself,
otherwise your guarantee becomes invalid.
- Always put the machine on a at and stable surface. Keep it in upright
position, also during transport.
- Do not place the machine on a hotplate or directly next to a hot oven,
heater or similar source of heat.
- Unplug the machine if problems occur during grinding or brewing and
before you clean it.
- Let the machine cool down before inserting or removing any parts.
The heating element surface is subject to residual heat after use.
-Descale the machine regularly.
- If you do not clean and descale the machine, you run the risk that the
machine stops working and that your guarantee becomes invalid.
- Never ll the water tank with warm, hot or sparkling water, as this may
cause damage to the water tank and the machine.
- Do not use aggressive cleaning agents, solvents or chemicals to clean
the machine.
- Do not keep the machine at temperatures below 0°C. Water left in
the heating system may freeze and cause damage.
-This machine is intended for normal household use only. It is not
intended for use in environments such as staff kitchens of shops, ofces,
farms or other work environments.
Electromagnetic elds (EMF)
This machine complies with all applicable standards and regulations
regarding exposure to electromagnetic elds.
Before rst use
Installing the machine
1 Remove all packaging material from the machine.
2 Place the machine on a table or worktop away from the tap, the sink
and heat sources.
ENGLISH8

3 Leave at least 15cm of free space above, behind and on both sides of
the machine.
4 Insert the small plug into the socket located on the back of the
machine.
5 Insert the plug into the wall socket.
6 Remove the protective sticker from the drip tray and slide the drip
tray into the guiding grooves in the front of the machine.
Note: Make sure the drip tray is fully inserted.
Preparing for use
Filling the water tank
1 Remove the water tank from the machine.
2 Rinse the water tank under the tap.
ENGLISH 9

3 Fill the water tank with cold tap water up to the MAX indication.
Never ll the water tank with warm, hot or sparkling water, as this may
cause damage to the water tank and the machine.
4 Slide the water tank back into the machine.
Filling the coffee bean container
1 Fill the coffee bean container with espresso beans.
Only use espresso beans. Never use ground coffee, unroasted coffee
beans or caramelised coffee beans, as this may cause damage to the
machine.
2 Put the lid on the coffee bean container.
Heating up the machine
During the initial heat-up process, fresh water ows through the internal
circuit to heat up the machine. This takes a few seconds.
1 Place a bowl under the hot water/steam wand or classic milk frother
and the coffee spout. Make sure the control dial points to the coffee
bean icon.
2 Press the on/off button.
ENGLISH10