Philips SENSEO HD7827 User manual

User manual
HD7827
HD7825

1

HD7827, HD7825
ENGLISH 6
DEUTSCH 32
FRANÇAIS 61
NEDERLANDS 89

6
Introduction
Congratulations on your purchase and welcome
to Philips! To fully benet from the support that
Philips offers, register your product at
www.philips.com/welcome.
SENSEO®coffee system
Make your coffee moments truly special with
SENSEO®.This unique system combines the
easy-to-use Philips SENSEO®coffee machine with
the specially developed Douwe Egberts SENSEO®
coffee pods, giving you a full, smooth coffee with a
delicious foam layer.
The Douwe Egberts coffee in convenient SENSEO®
coffee pods and Philips’ unique new SENSEO®
brewing system are perfectly matched to ensure
that the best taste and aroma are extracted from
the coffee.
To ensure a smooth and full coffee taste, you should
keep the following things in mind:
Fresh water
Use fresh water every day. If you have not used the
coffee machine for one day, you have to ush it with
fresh water before you use it again (see section
‘Flushing’ in chapter ‘Cleaning’).
Fresh coffee pods
Use the SENSEO®coffee pods that have been
specially developed by Douwe Egberts for your
SENSEO®coffee machine for a full, round taste.
The Douwe Egberts SENSEO®coffee pods stay
fresh longer if you store them in an airtight storage
container.
Discover all SENSEO®coffee blends that are
available at www.senseo.com.
ENGLISH

A clean machine with the new ushing and
descaling procedures
Note: Philips has improved the ushing and descaling
procedures. See chapters ‘Cleaning’ and ‘Descaling’ for
the new procedures.
Clean and descale your Philips SENSEO®coffee
machine regularly.
- Remove used coffee pods after brewing. If a used
pod has been left in the coffee machine and you
have not used the machine for some time, ush
the machine before you use it again (see section
‘Flushing’ in chapter ‘Cleaning’).
- If you have not used the coffee machine for one
day, you have to ush the machine with fresh
water before you use the machine again
(see section ‘Flushing’ in chapter ‘Cleaning’).
- Descale the SENSEO®coffee machine as
described in chapter ‘Descaling’ when the
CALC light goes on (after you have brewed
approx. 400 cups of SENSEO®coffee).You can
also descale the SENSEO®coffee machine more
often (every 3 months) in the same way. Descaling
takes 20 to 30 minutes. Do not interrupt the
descaling process.
General description (Fig. 1)
1 Water reservoir
2 Water reservoir cover
3 Sealing ring
4 Water distribution disc
5 CALC light
6 1-cup button q
7 On/off button with light ring
8 2-cup button qq
9 Drip tray
ENGLISH 7

10 Cup tray
11 Coffee spout
12 Cover of coffee spout
13 Coffee collector
14 2-cup pod holder qq
15 1-cup pod holder q
Important
Read this user manual carefully before
you use the machine and save it for
future reference.
Danger
- Never immerse the machine in water
or any other liquid.
Warning
- Check if the voltage indicated on the
bottom of the machine corresponds
to the local mains voltage before you
connect the machine.
- This machine is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the machine by a
person responsible for their safety.
ENGLISH8

- Children should be supervised to
ensure that they do not play with the
machine.
- Do not use the machine if the plug,
the mains cord or the machine itself
is damaged.
- If the mains cord is damaged, you
must have it replaced by Philips, a
service centre authorised by Philips
or similarly qualied persons in order
to avoid a hazard.
Caution
- Always return the machine to
a service centre authorised by
Philips for examination or repair.
Do not attempt to repair the
machine yourself, otherwise your
guarantee becomes invalid.
-
Never put normal ground coffee or use
torn pods in the SENSEO®machine,
as this causes it to become blocked.
- Do not use the machine in
combination with a transformer, as
this could cause hazardous situations.
- Always put the machine on a at and
stable surface.
- Never let the machine operate
unattended.
ENGLISH 9

- Do not use the machine at altitudes
higher than 2200 metres above
sea level.
- The machine does not work at
temperatures below 10°C.
- Flush the coffee machine with fresh
water before you use it for the rst
time (see chapter ‘Before rst use’).
This causes the boiler to ll with
water, which is essential for the
machine to work properly.
- Do not use the SENSEO®machine
in combination with water softeners
based on sodium exchange.
- Philips strongly advises you to
descale this SENSEO®machine
every 3 months. If the machine is not
descaled in time and according to
the procedure described in chapter
‘Descaling’, this may lead to technical
failures.
- Never interrupt the descaling process.
- Never use a descaling agent based
on mineral acids such as sulphuric
acid, hydrochloric acid, sulphamic acid
and acetic acid (e.g. vinegar).These
descaling agents may damage your
SENSEO®coffee machine.
ENGLISH10

- After unpacking the machine, never
put your SENSEO®machine on
its side.Always keep it in upright
position, also during transport.
- This machine is intended for normal
household use only. It is not intended
for use in environments such as staff
kitchens of shops, ofces, farms or
other work environments. Nor is
it intended to be used by clients in
hotels, motels, bed and breakfasts and
other residential environments.
Compliance with standards
This machine complies with all standards
regarding electromagnetic elds (EMF).
If handled properly and according to
the instructions in this user manual,
the machine is safe to use based on
scientic evidence available today.
The energy consumption of this
machine in off mode is less than
1 watt.This means that this machine
complies with European Directive
2009/125/EC, which sets the
ecological design requirements
for energy-using products.
ENGLISH 11

First use
Unpacking
1 Remove the machine from the box.
Note: Make sure you store the 2-cup pod holder in a
safe place. It is an essential part of the machine.
Flushing the machine to ll the boiler
YOU CANNOT BREW COFFEE IFYOU
HAVE NOT FLUSHED THE SENSEO®COFFEE
MACHINE FIRST!
The ushing cycle causes the boiler to be lled with
water. After this, the coffee machine is ready for use.
Flush the machine in the following way:
1 Remove the water reservoir.
2 Fill the water reservoir with water up to the
MAX indication.
3 Put the water reservoir back.
ENGLISH12

4 Place a bowl with a capacity of at least
1.5 litres on the cup tray.
5 Make sure a pod holder, without pod or pods,
is in place.
6 Put the plug in an earthed wall socket.
7 Press the on/off button 3.
The light ring around the on/off button lights up to
indicate that you have to ush the machine.
8 Tostartushing,pressthe1-cupbuttonqand
the2-cupbuttonqqbrieyatthesametime.
Neverinterrupttheushingcyclehalfway.Ifyou
do,theboilerdoesnotllitselfproperly.
,The light ring around the on/off button starts
ashingtoindicatethattheushingcyclehas
started.Theushingcycletakesapprox.1.5to
2.5 minutes.
,Duringtheushingcycle,theboilerllsitself
with water from the water reservoir and cold
water comes out of the coffee spout. During the
ushingcycle,themachineproducesmorenoise
than during a regular brewing cycle.
ENGLISH 13

,When all the water in the water reservoir has
beenusedup,theushingcycleisnishedand
the machine switches off.
Now your Philips SENSEO®coffee machine
is ready for use.
Note: If the machine does not work, repeat steps 1-8.
Do not interrupt the ushing cycle.
Brewing SENSEO®coffee
Tips for the best SENSEO®quality
- Use fresh water every time.
- Use the SENSEO®coffee pods that have been
specially developed by Douwe Egberts for your
SENSEO®coffee machine for a full, round taste.
The Douwe Egberts SENSEO®coffee pods
stay fresh longer if you store them in an airtight
storage container.
- To make sure that the coffee always tastes
optimally, rinse the pod holders, the coffee
collector and the coffee spout regularly.
- The SENSEO®coffee tastes best if you stir it
before you drink it.
- If you have not used the coffee machine for
some time, ush the machine before you use it
again (see section ‘Flushing the coffee machine’ in
chapter ‘Cleaning the machine’) with fresh water
before you use it again.
- If you intend to make another cup of SENSEO®
coffee later, just leave the coffee machine switched
on.The machine automatically switches off after
30 minutes.
ENGLISH14

Filling the water reservoir
1 Fill the water reservoir with cold water up to
the MAX indication and put it back onto the
machine.
Never pour milk, coffee, hot water or carbonated
water into the water reservoir.
The MIN indication on the water reservoir
indicated the minimum amount of water required
forbrewingcoffee.Alwaysllthewaterreservoir
beyond the MIN level.
Switching on the machine
1 Put the plug in an earthed wall socket.
2 Press the on/off button 3.
,Thelightringashesslowlywhilethewater
heats up. Heating up takes approx. 75 seconds.
,The coffee machine is ready for use when
the light ring lights up continuously.
Note: If the light ring ashes rapidly, the water reservoir
does not contain enough water for brewing one cup of
coffee.
Placing a pod holder
1 Release the lid by moving the lever upwards.
,The lid opens automatically.
2
Place the appropriate pod holder in the machine.
Note: Make sure the pod holder is clean and the sieve in
the centre is not clogged, e.g. with loose coffee grounds.
ENGLISH 15

- If you want to make one cup of SENSEO®coffee,
use 1 coffee pod in combination with the 1-cup
pod holder qand the 1- cup button q.
- If you want to make two cups of SENSEO®coffee,
use 2 coffee pods in combination with the deeper
2-cup pod holder qq and the 2-cup button qq.
Placing one or two pods
1 Place the SENSEO®coffee pod(s) properly in
the centre of the pod holder, with the convex
side pointing downwards.
Note: Use SENSEO® coffee pods from Douwe Egberts
specially designed for your SENSEO® coffee machine
for a full and round taste.
Note: Make sure the coffee in the pod(s) is evenly
distributed and press the pod(s) lightly into the pod
holder.
Note: Never put normal ground coffee or use torn pods
in the SENSEO® machine, as this causes it to become
blocked.
- Place 1 SENSEO®coffee pod in the 1-cup pod
holder q.
- Place 2 SENSEO®coffee pods in the 2-cup pod
holder qq.
ENGLISH16

2 Close the lid and lock the lever.
Make sure the lid is closed properly and the lid
lever is locked before you start brewing coffee.
3 Place one cup or two cups under the
spout openings.You can adjust the height
of the coffee spout by sliding it upwards or
downwards.
The cups you use should have a capacity of at least
150 ml. Do not use cups that are too large, as
they cause the coffee to get cold more quickly.
4 Press the button indicating the number of cups
of SENSEO®coffee you want to brew.
- Press the 1-cup button qfor one cup.
- Press the 2-cup button qq for two cups.
The SENSEO®coffee machine starts
brewing.
- The machine automatically supplies the optimal
amount of water.
- You can interrupt the brewing process at any time
by pressing the on/off button 3. If you switch
the machine back on after having interrupted the
brewing process, the machine does not complete
the interrupted brewing cycle.
Do not remove the water reservoir during a
brewing cycle, as this causes the machine to
draw in air.When this happens, the next cup is
onlypartlylled.
ENGLISH 17

Note: If no coffee comes out of the machine, you have
not ushed the machine before rst use. As a result,
the boiler is not lled. Flush the machine as described
in chapter ‘Before rst use’ before you start brewing
coffee. If only a small amount of coffee comes out of
the machine, ush the machine as described in section
‘Flushing’ in chapter ‘Cleaning’ before you brew another
cup of coffee.
5 Remove the coffee pod(s) after use by lifting
the pod holder out of the machine and
emptying it.
Be careful when you do this, for there may still be
some water/coffee on the coffee pod(s).
Interrupting the brewing process
1 Press the on/off button 3to interrupt the
brewing process.
Note: If you switch the machine back on after you have
interrupted the brewing process, the machine does not
complete the interrupted brewing cycle.
Switching off
1 After use, press the on/off button 3to switch
off the machine.
Note: If you do not use the machine, it switches off
automatically after 30 minutes, for energy saving.
Cleaning the machine
Never immerse the SENSEO®coffee machine in
water.
ENGLISH18

Cleaning the coffee machine
1 Always unplug the machine before you clean it.
2 Clean the outside of the machine with a moist
cloth.
3 Remove the coffee collector.
4 Take the coffee spout out of the machine by
sliding it upwards.
Note: You can only remove the coffee spout after you
have removed the coffee collector.
5 Disassemble the coffee spout if you want to
clean it more thoroughly.
6 Clean the coffee spout, the coffee collector
and the drip tray in hot water, if necessary with
somewashing-upliquid,orinthedishwasher.
7 Hold the cup tray in your hand while you
clean it with hot water. If necessary, use some
washing-upliquid.
The cup tray can also be cleaned in the dishwasher.
To clean the cup tray, always remove it from the
machine, as it might prove sharp when handled
incorrectly.Always handle it carefully.
ENGLISH 19

8 Clean the pod holders in hot water, if
necessarywithsomewashing-upliquid,orin
the dishwasher.
Check if the sieve in the centre of the pod holder is
clogged. If this is the case, unclog the sieve by rinsing
the pod holder under a running tap. If necessary, use
a washing-up brush to clean the sieve.
9 Clean the water reservoir in hot water, if
necessarywithsomewashing-upliquid,orin
the dishwasher.
Note: If you use a washing-up brush, be careful not to
damage the valve in the bottom of the water reservoir.
Remove the water reservoir cover for easier cleaning.
10 Clean the water inlet on the machine with a
moist cloth.
Do not use an object with sharp edges to clean the
water inlet.
11 Rinse the parts with fresh water and put them
back into the machine.
12 Clean the water distribution disc with a moist
cloth.
Be careful when you do this; make sure that the
rubber sealing ring does not get stuck under the
edge of the water distribution disc. If it does, the
coffee machine will start leaking!
Note: Be careful not to damage the metal tab on the
water distribution disc.
ENGLISH20