Philips SPF3473 User manual

D.06.13.14

Copyright
No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system or translated into
any language or computer language, in any form or by any
means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of
the company.
Disclaimer
The company makes no representations or warranties,
either expressed or implied, with respect to the contents
hereof and specifically disclaims any warranties,
merchantability or fitness for any particular purpose. Further,
the company reserves the right to revise this publication and
to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or
changes.
Safety Instructions
Before operating the PhotoFrame, carefully read and follow the
instructions below. Retain this User Manual for future reference.
• Read the safety and operating instructions carefully before
using the product. All warnings on the product and in the
operating instructions should be observed.
• Do not place this product under direct sunlight or near heat
sources, such as in a closed car under sunlight or near a stove.
The outer casing of this product may become deformed and
the sophisticated sensors inside may become damaged due
to excessive heat.
• Do not use this product near water, in the rain or allow any
liquid to get inside this product. Water and moisture may cause
short-circuit to the electronic components and lead to
malfunctions.
Philips Digital PhotoFrame
EN-i Copyright

• Do not use this product near strong electromagnetic sources,
such as a microwave oven. The electromagnetic interference
may cause this product to malfunction.
• Do not drop or apply shock/vibration to this product. Strong
impacts may damage the components inside.
• Do not insert objects other than compatible memory cards
into the memory card slots of this product. The metal
contacts inside the slot can easily become damaged by
foreign objects.
• Do not use an unknown power adapter other than the one
supplied with the PhotoFrame. Connecting this product to
an unknown power adapter is very dangerous and may lead
to fire or explosion.
• Do not cut, bend, modify, place heavy objects, or step on
the power adapter cord. Otherwise the external insulation
may be damaged and result in short-circuit or fire.
• If there are strange odors or heat emitting from this product
or any signs of malfunction, disconnect the PhotoFrame from
the power immediately and contact your dealer for inspection
or service.
• Use a smooth, soft cloth to clean the surface of the screen.
Do not use liquid cleaners or glass cleaners.
• Do not attempt to disassemble or modify this product. There
are no user serviceable parts inside this product, and any
unauthorized modifications will void the warranty.
• Although the LCD panel is made with high-precision
technology and has effective pixels of 99.99% or more, black
dots or bright points of light (red, blue or green) may appear
constantly on the LCD panel. This is a structural property of
the LCD panel and is not a malfunction.
EN-ii
Philips Digital PhotoFrame
Safety Instructions

Table of contents
Copyright..................................................................................................... i
Safety Instructions .....................................................................................ii
Table of contents....................................................................................... 1
Key Features............................................................................................. 2
What's in the Box...................................................................................... 3
Overview.................................................................................................... 4
Right Rear View.............................................................................. 4
Getting started........................................................................................... 6
Step 1: Using the adjustable stand............................................... 6
Step 2: Connecting to power......................................................... 7
Step 3 Starting Slideshows Automatically................................... 8
Operating the PhotoFrame ...................................................................... 8
Using the Main Menu ..................................................................... 9
Viewing Photos ............................................................................. 10
Using Smart Energy Saver.......................................................... 11
Using the CLOCK (G-button)...................................................... 11
Using Settings............................................................................... 12
Appendix.................................................................................................. 14
Specifications................................................................................ 14
Frequently asked questions................................................................... 15
Regulation & Compliance ...................................................................... 16
Philips ONE(1)YEAR LIMITED WARRANTY...................................... 17
Philips Digital PhotoFrame
EN-1 Table of contents

Key Features
This PhotoFrame is equipped with the following features:
Display clear and bright photos.
Enables you to play back photo files that are stored in a
memory card (SD/SDHC, MMC) or a USB flash drive.
Smart Energy Saver software to personalize your frame,
saving power when frame is not in use.
Clock function
Resolution: 800 x 480
Supported photo format: JPEG
Rating: DC5V 1A
Dear Customer:
Thank you for bringing our Philips Digital PhotoFrame into
your home. Now you will be able to view your growing digital
picture library in stunning clarity and share great memories
with friends and family.
To get the most out of your new Philips product, please
read through this entire User Manual before use.
EN-2
Philips Digital PhotoFrame
Key Features

What's in the Box
Carefully open the packing box and ensure that you have the
following items.
1. Digital PhotoFrame
2. AC power adapter
3. User Manual
The appearance and accessories included may vary based on
model number
Philips Digital PhotoFrame
EN-3 What’s in the Box

Overview
Right Rear View
No. Description
1Back stand
2Power button
Turn on/off the PhotoFrame
3USB port
Allows for a USB flash drive.
Playback photos stored in the inserted drive.
4Memory card slot Allows for an SD/SDHC, MMC.
Playback photos stored in the inserted card.
5Power jack
Connect one end of the AC power adapter into the power
jack and the other end into a power outlet.
1
2
3
4
5
SD/MMC/MS/MS Pro
PHILIPS
EN-4
Philips Digital PhotoFrame
Overview

# Description
1 MENU button
Displays the pop-up menu.
2 EZ Access Button
Switches between Clock view and Slideshow view.
3 ESC button (ESCAPE button)
Cancels current operation and/or returns tothe previous page
4 Scroll wheel/OK button
Scroll up/down to select the previous/next item
Press to enter or confirm your operation /selection
5 Kensington®security slot
You can attach an anti-theft Kensington®lock andcable tothis slot
to help prevent possibletheft.
6 EZ lock System
You can use the EZ Lock Screws to lock or unlock the wooden
frame.
7 Wall mount hole (for landscape wall mounting)
Allows you to hang the PhotoFrame horizontally on a wall.
8 Wall mount hole (for portrait wall mounting)
Allows you to hang the PhotoFrame vertically on a wall.
PHILIPS
Philips Digital PhotoFrame
EN-5 Rear view

PHILIPS
PHILIPS
Getting started
Step 1: Using the adjustable stand
1. Gently pop out the back stand as shown below
2. To place the PhotoFrame horizontally or vertically, you can
rotate the back stand by aligning the triangle mark with the
rounded points (1 or 2).
3. Pull out the back stand and adjust accordingly tothe preferred
viewing angle
EN-6
Philips Digital PhotoFrame
Getting started

SD/MMC/MS/MS Pro
SD/MMC/MS/MS Pro
PHILIPS
PHILIPS
It is recommended to place the PhotoFrame horizontally, because this
direction provides the best viewing and operating experience.
By using the wall mount holes, you can hang the PhotoFrame
horizontally or vertically on the wall.
Step 2: Connecting to power
1. Place the PhotoFrame on a flat surface.
2. Connect the power adapter as below (1), and press the Power
button to turn on the PhotoFrame (2)
Power systems and plug types may vary depending on your
country/region.
To turn off the PhotoFrame, press the PhotoFrame
Philips Digital PhotoFrame
EN-7 Getting started