Philips AJ5300D/12 User manual

Register your product and get support at
www.philips.com/welcome
AJ5300D
EN User manual

a
b
c
h
g
i
d
l
k
j
e
f
A

B

SOURCE
C

D

VOLUME
E

EN
1 Important
Safety
 Heed all warnings, and follow all instructions.
 Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
 Do not install near any heat sources such as radiators, heat registers,

 Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point where
they exit from the clock radio.
 
 Unplug the clock radio during lightning storms or when unused for
long periods of time.
 
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
 The clock radio shall not be exposed to dripping or splashing.
 Do not place any sources of danger on the clock radio (e.g. liquid

 Where the plug of the Direct Plug-in Adapter is used as the
disconnect device, the disconnect device shall remain readily
operable.

Warning
 Never remove the casing of this clock radio.
 Never place this clock radio on other electrical equipment.
 
heat.
 
apparatus to rain or moisture.
 Ensure that you always have easy access to the power cord, plug
or adapter to disconnect this clock radio from the power.
2 Your Docking Entertainment
System
Congratulations on your purchase, and welcome to Philips! To fully

www.philips.com/welcome.
If you contact Philips, you will be asked for the model and serial number
of this apparatus.The model number and serial number are on the
bottom of the apparatus.Write the numbers here:
Model No. __________________________

Introduction
With this clock radio, you can
 listen to FM radio;
 enjoy audio from iPod/iPhone or an external device;
 set alarms to ring at different time;
 choose buzzer, radio, or audio in iPod/iPhone as your alarm source;
 experience various features brought by HomeStudio app.

What’s in the box
Check and identify the contents of your package:
 Main unit
 DC adaptor
 User manual
Overview of the main unit
a AL1/AL2
 
 View alarm settings.
 Activate/deactivate alarm timer.
b SOURCE
 
c  Turn on/off the clock radio.
d DOCK
 Dock for iPod/iPhone.
e - VOLUME +
 Adjust volume.
f SNOOZE/BRIGHTNESS
 
 Adjust display brightness.
g TIME SET
 
h TUNING
 Tune or scan to an FM radio station.

i DC IN
 Power supply socket.
j FM ANTENNA
 Improve FM reception.
k MP3-LINK
 Connect an external audio device.
l SLEEP
 
3 Get started
Caution
 Use of controls or adjustments or performance of procedures other than
herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
Connect power
Caution
 Risk of product damage! Make sure that the power voltage corresponds to
the voltage printed on the back or underside of the unit.
 Risk of electric shock! When you unplug the power adapter, always pull the
plug from the socket. Never pull the cord.
 Before connecting the power adapter, make sure that you have completed
all other connections.
 Use the supplied power adapter only.

Turn on
Press .
» The clock radio switches to the last selected source.
Switch to standby mode
Press to switch the clock radio to standby mode.
» 
Set time and date
1 In standby mode, press and hold TIME SET on the back of your
clock radio for more than two seconds.
» [12H] or [24H] begins to blink.
2 Press / repeatedly to select 12/24 hour format.
3 Press TIME SET
» The hour digits begin to blink.
4 Repeat steps 2-3 to set hour and minute.
Note
 If clock is not manually set, when iPod/iPhone is connected, the unit
synchronizes time from the iPod/iPhone automatically.
Tip
 The accuracy of the transmitted time depends on the docked iPod/iPhone
that transmits the time signal.

4 Play
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through this clock radio.
Compatible iPod/iPhone
The unit supports the following iPod, iPhone models:
Made for.
 iPod classic
 
 
 
 iPhone 4
 
 iPhone 3G
 iPhone
Install HomeStudio App
Philips HomeStudio app brings a suite of new features to your clock
radio, including FM radio programming and a multi-function alarm
clock.To enjoy more features, you are recommended to install this free
HomeStudio app.
Note
 Make sure that your iPod/iPhone is connected to the Internet.
1 Press SOURCE repeatedly to select DOCK mode.

2 Insert your iPod/iPhone into the dock.
3 HomeStudio
app on your iPod/iPhone.
4 Tap [Yes]
5 Follow the on-screen instructions to complete the installation.
Philips HomeStudio app only can be installed in the following iPod,
iPhone models:
 
 
 iPhone 4
 
 iPhone 3G
 iPhone
Play music in the iPod/iPhone
Note
 Make sure that you have installed the HomeStudio app on your iPod/iPhone.
1 Tap HomeStudio icon on your iPod/iPhone.
» The clock/alarm setting screen appears.
2 
3  .
» Music streams from your iPod/iPhone to the clock radio.

Use more features with “HomeStudio App”
Note
 Make sure that your iPod/iPhone is inserted into the clock radio.
Set clock, alarm, and sleep timer:
1 Launch the HomeStudio app.
2 On the screen below, tap the setting icon .
» You can set clock, sleep timer, and alarm for your clock radio.
Note
 The alarms set with your clock radio will appear under [Dock Alarm] (dock

 You can also set more alarms by tapping on the top right of the alarm
setting screen.
Store FM radio stations manually:
1 
2 Press to tune to a radio station.
3 Press [SAVE] 
» [SAVE] 
» The radio station is saved successfully.
4 If [SAVE]
a number to save stations directly.

Tip
 If you need not preset more stations, press [SAVE]

Use more features:

 set the theme;
 share the information;
 set the location for weather report;
 choose temperature unit;
 select month/day display mode;
 store radio stations automatically by tapping [Radio Auto Program]

» [Searching] 
» All available stations are stored.
» 
Charge the iPod/iPhone
When your clock radio is connected to power, the docked iPod/iPhone
begins to charge automatically.
Remove the iPod/iPhone
Pull the iPod/iPhone out of the dock.