Philips AS111/12 User manual

User manual
AS111
Register your product and get support at
www.philips.com/welcome

1
English
EN
Contents
1 Important 2
2 Your Docking Speaker for
Android™ 3
Introduction 3
What's in the box 3
Overview of main unit 3
3 Get started 4
Connect power 4
Turn on 4
Set time 4
Adjust brightness of display panel 4
Adjust brightness of night light 4
4 Play and charge 6
Compatible with Android™ 6
Play audio through manual Bluetooth
connection 6
Play audio through auto Bluetooth
connection with Philips DockStudio 7
Dock and charge Android-powered
phone 12
Play audio with Philips Songbird 14
5 Use more features with
DockStudio 17
Listen to Internet radio 17
Set sleep timer 17
Set alarm timer 18
6 Product information 20
Specications 20
7 Troubleshooting 21
8 Notice 22
Recycling 22

2EN
1 Important
• Read these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or
otherapparatus(includingampliers)that
produce heat.
• Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the unit.
• Onlyuseattachments/accessoriesspecied
by the manufacturer.
• Unplug this unit during lightning storms or
when unused for long periods of time.
• Referallservicingtoqualiedservice
personnel. Servicing is required when the
unit has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the unit, the unit has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
• This unit shall not be exposed to dripping
or splashing.
• Do not place any sources of danger on
theunit(e.g.liquidlledobjects,lighted
candles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Modication of the product could result in
hazardous radiation of EMC or other unsafe
operation.

3
English
EN
2 Your Docking
Speaker for
Android™
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this docking speaker, you can:
• enjoy audio from your Bluetooth-enabled
device;
• charge your device through micro USB
connector;
• Know the time; and
• experience various features brought by
Philips Philips DockStudio and Philips
Songbird app.
What's in the box
Check and identify the contents of your
package:
• Main unit
• Power adapter
• Dock extension
• Quick start guide
• Safety sheet
Overview of main unit
a Dock for Android-powered phone
b Display panel
• Show time.
• Show Bluetooth status.
c
• Activate or deactivate Bluetooth
function.
d CLOCK/NIGHT LIGHT
• Set time.
• Adjust the brightness of display panel
and night light.
e +/-
• Adjust volume.
• Adjust time.
a
b
c
d
e

4EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
•Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the unit.
•Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the power adapter to the wall outlet.
Turn on
Press .
» The Bluetooth indicator begins to
blink.
Switch to standby mode
Press again to switch the docking speaker to
standby mode.
» The Bluetooth indicator turns off.
Set time
1 In standby mode, press and hold CLOCK/
NIGHT LIGHT for two seconds to
activate clock setting mode.
» [24H] begins to blink.
2 Press +/- to set the 12/24 hour format.
3 Press CLOCK/NIGHT LIGHTtoconrm.
» The hour digits begin to blink.
4 Repeat steps 2 to 3 to set the hour and
minute.
» The set time is displayed.
Adjust brightness of display
panel
In standby mode, press CLOCK/NIGHT
LIGHT repeatedly to adjust the brightness of
the display panel: high, medium, or low.
Adjust brightness of night
light
1 Press to turn on the speaker.

5
English
EN
2 Press CLOCK/NIGHT LIGHT repeatedly
to adjust the brightness of the night light:
high, medium, or off.

6EN
4 Play and charge
With this docking speaker, you can enjoy audio
in two ways:
• through manual Bluetooth connection;
• through automatic Bluetooth connection
with Philips DockStudio app.
Compatible with Android™
To make full use of your docking speaker, your
Android-powered device should satisfy the
following requirements:
• With Android operation system (Version
2.1orabove);
• With Bluetooth software (Version 2.1 or
above);and
• With a micro USB connector.
For other devices with micro USB connector
and Bluetooth function, you can still use the
docking speaker to do the following:
• Charge your device through the USB
connector;
• Enjoy audio through Bluetooth.
Tip
•Formoredetails,gotowww.philips.com/exidock.
Play audio through manual
Bluetooth connection
The docking speaker uses Bluetooth wireless
technology to stream music from your portable
device to the system.
Note
•Before you connect a Bluetooth device to this docking
speaker, familiarize yourself with the Bluetooth
capabilities of the device.
•Keep this docking speaker away from other electronic
devices that may cause interference.
1 On your docking speaker, press to
activate Bluetooth.
» The Bluetooth indicator blinks on the
display panel.
2 Turn on Bluetooth function of your
portable device.
• Different devices may have different
way to activate Bluetooth.
3 Scan Bluetooth devices that can pair with
your portable device.
4 When [PHILIPS AS111] is displayed on
your device, select it to start connection.
» If connection is successful, you will hear
doublebeepconrmationtoneand
ndadifferentBluetoothicononthe
top of the screen.

7
English
EN
5 Play audio with the media player of your
portable device.
» The audio comes out through the
docking speaker.
Tip
•The effective operation range between the docking
speaker and the paired device is approximately 10
meters(30feet).
•Any obstacle between the speaker and the device can
reduce the operational range.
Play audio through auto
Bluetooth connection with
Philips DockStudio
Philips DockStudio app brings a suite of new
features to your docking speaker, including
automatic Bluetooth connection, Songbird
music player, Internet radio and a multi-function
alarm clock.To enjoy more features, you are
recommended to download and install the free
app.
Install DockStudio app onto Android-
powered device
You have two ways to install Philips
DockStudio on your Android-powered device.
Install DockStudio app through QR code
Note
•Make sure that your Android-powered device is
connected to the Internet.
•Make sure that your device has a barcode scanner such
as "QR Droid". If not, download one from the Android
market.
1 Use the barcode scanner to scan the QR
code on the package or Quick Start Guide.

8EN
2 Follow the on-screen instructions to install
Philips DockStudio app.
3 When installation is complete, tap [Done]
(done).
» The DockStudio icon appears on your
portable device.
The Philips DockStudio app brings a suite of
cool, new features to your Philips DockStudio
docking speaker, including automatic Bluetooth
connection, Songbird music player,
worldwide Internet radio, sound settings
DockStudio
Install DockStudio app through Android
Market
You can also search Philips DockStudio from
Android Market directly, and then install the app.
Note
•Make sure that your Android-powered device is
connected to the internet.
•Make sure that Android Market is available on your
Android-powered device.
1 Tap the "Android Market" icon on your
device.
DockStudio

9
English
EN
2 Tap the search icon on the screen.
3 In the search bar, type in "Philips
DockStudio" to search the app.
4 Fromthesearchresultlist,ndandtap
Philips DockStudio to start downloading.
5 Follow the on-screen instructions to install
the DockStudio app.
6 When installation is complete, tap [Done]
(done).
The Philips DockStudio app brings a suite of
cool, new features to your Philips DockStudio
docking speaker, including automatic Bluetooth
connection, Songbird music player,
worldwide Internet radio, sound settings
DockStudio