Philips DVP5100K/75 User manual

8239 300 34331
DVD VIDEOPLAYER DVP5100K
Usermanual
Thankyouforchoosing Philips.
Needhelp fast?
ReadyourUser’sManualfirstforquicktipsthatmakeusing
yourPhilipsproductmoreenjoyable.
Ifyouhavereadyourinstructionsandstillneedassistance,
youmayaccessouronlinehelpatwww.philips.com/support
01-43 DVP5100K_75 26/01/2005, 10:28 AM1

8239 300 34331
Manufactured under license from Dolby
Laboratories.“Dolby”,“Pro-Logic” and the
double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license from Digital
Theater Systems, Inc. U.S. Pat. Nois.
5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and
other U.S. and world-wide patents issued
and pending. "DTS" and "DTS Digital
Surround" are registered trademarks
of DigitalTheater Systems, Inc.
All Right Reserved.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation,and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
01-43 DVP5100K_75 26/01/2005, 10:28 AM2

8239 300 34331
‘CONSUMERS SHOULD NOTETHAT NOT
ALL HIGH DEFINITIONTELEVISION SETS
ARE FULLY COMPATIBLEWITHTHIS
PRODUCTAND MAY CAUSEARTIFACTS
TO BE DISPLAYED INTHE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN
PICTURE PROBLEMS,IT IS RECOMMENDED
THATTHE USER SWITCHTHE
CONNECTIONTOTHE‘STANDARD
DEFINITION’ OUTPUT. IFTHEREARE
QUESTIONS REGARDING OURTV SET
COMPATIBILITYWITHTHIS MODEL 525p
AND 625p DVD PLAYER,PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.’
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases,shall be placed on apparatus.
Due to the inconsistency of disc formats
provided by various disc manufacturers,your
DVD system may require a playability
enhancement or upgrade. As DVD technology
advances, these enhancements will become
common and will be easy to complete.
Go to www.philips.com/support for
software upgrade.
01-43 DVP5100K_75 26/01/2005, 10:28 AM3

8239 300 34331
General Information
CAUTION
(WARNING LOCATION: ON THE
BACKPLATE OF THE SET)
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE
POWER SWITCHED ON.
Laser safety
This unit employs a laser.Due to possible
eye injury,only a qualified service person
should remove the cover or attempt to
service this device.
NOTE:
PICTURES SHOWN MAYBE
DIFFERENT BETWEEN
COUNTRIES.
Environmental Information
All unnecessary packaging has been
omitted.The packaging has been made
easy to separate into two materials:
cardboard (box,buffer) and polyethylene
(bags,protective foam sheet).
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Important Note:
Due to the numerous versions of new
CD-Audio copy protection or
enhanced CD-Audio protection
recently available on certain discs,
Philips is unable to guarantee that
this DVD Player is fully compatible
with such new discs. Should you have
difficulty playing any such CD-Audio
discs, kindly refer them to your CD-
Audio disc retailer.
DivX, DivX Certified, and
associated logos are
trademarks of
DivXNetworks, Inc and
are used under license.
Microsoft,Windows
Media, and the Windows
logo are trademarks, or
registered trademarks of
Microsoft Corporation in
the United States and/or
other countries
01-43 DVP5100K_75 26/01/2005, 10:28 AM4

8239 300 34331
LASER
Type Semiconductor laser
GaAlAs
Wave length 650 nm (DVD)
780 nm (VCD/CD)
Output Power 7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree
For Customer Use:
Read carefully the information located at
the rear of your DVDVIDEO player and
enter below the Serial No.Retain this
information for future reference.
Model No.DVP 5100K
Serial No. _______________
01-43 DVP5100K_75 26/01/2005, 10:28 AM5

8239 300 34331
6
Introduction
Supplied accessories ....................................... 8
Care and safety information.......................... 8
Connections
ConnectingTV............................................ 9-10
Using CompositeVideo jacks (CVBS)........ 9
Using ComponentVideo jacks (Pr PbY) ... 9
Using an accessory RF modulator ............10
Connecting the power cord........................10
Optional :Connecting to anAudio System .
...........................................................................11
Stereo system has Dolby Pro Logic or Right
/ LeftAudio In jack ....................................... 11
Optional:Connecting DigitalAV Receiver ...
...........................................................................11
Receiver has a PCM,Dolby Digital,or
MPEG2 decoder............................................ 11
Functional Overview
Front and Rear Panels ..................................12
Remote Control ............................................13
Getting Started
Step 1:Inserting batteries into the
Remote Control ............................................14
Using the Remote Control to operate the
Player ............................................................... 14
Step 2:Setting up theTV........................14-16
Setting up Progressive Scan feature (for
Progressive ScanTV only)........................... 15
To deactivate Progressive manually .......... 16
Selecting the colour system that
corresponds to yourTV.............................. 16
Step 3:Setting language preference ...........17
Setting the OSD Language.......................... 17
Setting theAudio,Subtitle and Disc menu
language .......................................................... 17
Disc Operations
Playable Discs .................................................18
Region Codes .................................................18
Playing discs.....................................................18
Basic playback controls.................................19
Selecting various repeat/shuffle functions 19
Repeat play mode .........................................19
Repeating a section within a chapter/track .
......................................................................... 19
Operations for video playback ...................20
Using the Disc Menu....................................20
Zooming in..................................................... 20
Resuming playback from the last stopped
point ................................................................ 20
Slow motion................................................... 20
Using the OSD menu .................................. 20
Special DVD features....................................21
Playing aTitle ................................................. 21
CameraAngle ................................................ 21
Changing theAudio Language.................... 21
Subtitles ..........................................................21
SpecialVCD & SVCD Features.............21-22
Playback Control (PBC) .............................. 21
Preview ........................................................... 22
Playing DivX disc ...........................................22
Playing MP3/WMA/MPEG-4/JPEG/Kodak
Picture CD ......................................................23
General Operation....................................... 23
Selecting a folder and track/file .................23
Special picture disc features ........................24
Preview Function .......................................... 24
Zoom picture ................................................ 24
Playback with multi-angles .......................... 24
Scan Effect ......................................................24
Playing MP3/WMA music and JPEG picture
simultaneously ...............................................24
Karaoke Operations
Playing Karaoke discs ....................................25
General Operation....................................... 25
Key setting...................................................... 25
Vocal ................................................................ 25
Mode ...............................................................25
Contents
01-43 DVP5100K_75 26/01/2005, 10:28 AM6

8239 300 34331
7
DVD Menu Options
General Setup menu ...............................26-27
Locking/Unlocking the disc for viewing... 26
Dimming system’s display screen .............. 26
Programming disc tracks.......................26-27
OSD Language............................................... 27
Screen Saver - turning on/off .....................27
Sleep ................................................................ 27
DivXVOD registration code ..................... 27
Audio Setup Menu...................................28-29
Analogue output ........................................... 28
DigitalAudio Setup....................................... 28
Sound Mode................................................... 29
CD Upsampling ............................................. 29
Night Mode - turning on/off....................... 29
Video Setup Menu ...................................30-32
TVType ........................................................... 30
Setting theTV Display ................................. 30
Progressive - turning on/off........................ 31
Picture Setting ........................................ 31-32
Preference Page........................................33-35
Audio,Subtitle,Disc Menu.......................... 33
Restricting playback by Parental Control.....
......................................................................... 33
PBC .................................................................. 34
Changing the Password ...............................34
Setting the DivX Subtitle ............................35
Restoring to original settings.....................35
Troubleshooting ......................... 36–37
Specifications ......................................38
Glossary ......................................................................39
Language Code ................................................40
Warranties .................................................... 41-42
Contents
01-43 DVP5100K_75 26/01/2005, 10:28 AM7

8239 300 34331
8
Supplied accessories
Remote Control
and
twoAA batteries
Introduction
Care and safety information
●Power consumption
– When the system is switched to
Standby mode,it is still consuming power.
To disconnect the system from the power
supply completely,remove theAC power
plug from the wall jack.
●Avoid high temperatures, moisture,
water and dust
– Do not expose the player,batteries or
discs to humidity,rain,sand or excessive
heat (caused by heating equipment or
direct sunlight.)
●Avoid condensation problem
– The lens may cloud over when the
player is suddenly moved from cold to
warm surroundings,making it impossible
to play a disc.Leave the player in the
warm environment until the moisture
evaporates.
●Do not block the vents
– Do not operate the DVD Player in an
enclosed cabinet, allow about 10 cm (4
inch) of free space all around the player
for adequate ventilation.
10 cm
(4 inches)
10 cm
(4 inches) 10 cm
(4 inches)
PHILIPS
●Care of the cabinet
– Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits,
ammonia or abrasives.
●Finding a suitable location
– Place the player on a flat,hard,and
stable surface.
●Disc handling
– To clean a CD,wipe it in a
straight line from the center
towards the edge using a soft,
lint-free cloth. A cleaning
agent may damage the disc!
– Write only on the printed
side of a CDR(W) and only with a soft felt-
tipped pen.
– Handle the disc by its edge,do not
touch the surface.
PREVIEW
PREVIEW
MUTE
MUTE
SOUND
SOUND
SURROUND
SURROUND
SLEEP
SLEEP
DIM
DIM
Composite video
cable (yellow)
Audio cable
(white,red)
01-43 DVP5100K_75 26/01/2005, 10:28 AM8

8239 300 34331
9
Connections
Connecting TV
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV system.
– Connect the DVD system directly
to the TV.
Using Composite Video jacks
(CVBS)
1Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In,Video In,Composite or Baseband)
on theTV (cable supplied).
2To hear the sound of this DVD Player
through yourTV,use the audio cables
(white/red) to connectAUDIO OUT (L/
R) jacks of the DVD Player to the
correspondingAUDIO IN jacks on theTV
(cable supplied).
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
2
1
IMPORTANT!
– The progressive scan video
quality is only possible when usingY
Pb Pr and a progressive scanTV is
required.
Using Component Video jacks
(Y Pb Pr)
1Use the component video cables (red/
blue/green) to connect the DVD system’s
Y Pb Pr jacks to the corresponding
Component video input jacks (or labeled
asY Pb Pr) on theTV (cable not supplied).
2To hear the sound of this DVD Player
through yourTV,use the audio cables
(white/red) to connectAUDIO OUT (L/
R) jacks of the DVD Player to the
correspondingAUDIO IN jacks on theTV
(cable supplied).
3Proceed to page 15 for detailed
Progressive Scan set up.
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
IN
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
2
1
01-43 DVP5100K_75 26/01/2005, 10:28 AM9

8239 300 34331
10
Connections
IMPORTANT!
– If yourTV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on the TV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
1Use the composite video cable (yellow) to
connect the DVD Player’s CVBS jack to
the video input jack on the RF modulator.
2Use the RF coaxial cable (not supplied) to
connect the RF modulator to yourTV’s
RF jack.
AUDIO IN
R L
VIDEO
IN
TO TVINT IN
CH3 CH4
2
1
RF coaxial cable toTV
Back of RF Modulator
(example only)
Antenna or
CableTV signal
~ AC MAINS
AUDIO
OUT V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded,press
STANDBY ON on the DVD Player
front panel,
“NO DISC” may appear on the
display panel.
EJECT
Connecting the power cord
NO DISC
01-43 DVP5100K_75 26/01/2005, 10:28 AM10

8239 300 34331
11
Connections
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1Select one of the video connections
(CVBSVIDEO IN,SCART or
COMPONENTVIDEO IN) depending on
the options available on yourTV.
2Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
AUDIO
IN
STEREO
DIGITAL
Optional: Connecting to an
Audio System
Optional: Connecting Digital AV
Receiver
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1Select one of the video connections
(CVBSVIDEO IN,SCART or
COMPONENTVIDEO IN) depending on
the options available on yourTV.
2Connect the COAXIAL jack of the DVD
Player to the corresponding DigitalAudio
In jack on your Receiver (cable not
supplied).
3Set the DVD Player’s Digital Output to
PCM-ONLY orALL depending on the
capabilities of your Receiver (see page 28
“Digital Output”).
Helpful Hint:
–If the audio format of the Digital Output
does not match the capabilities of your
receiver,the receiver will produce a strong,
distorted sound or no sound at all.
AUDIO
IN
DIGITAL
AV Receiver
01-43 DVP5100K_75 26/01/2005, 10:28 AM11

8239 300 34331
12
Functional Overview
Front and Rear Panels
Audio Out (Left/Right)
– Connect toAUDIO inputs of an amplifier,
receiver or stereo system
COAXIAL (Digital audio out)
– Connect to coaxialAUDIO input of a
digital audio equipment
EJECT
Mains (AC Power Cord)
– Connect to a standardAC outlet
CVBS (VIDEO Out)
– Connect to CVBSVideo input of aTV
YPbPr (Component Video Out)
– Connect toYPbPr input of aTV
T NEXT
–To search or select next chapter or track
PREV S
–To search or select previous chapter or
track
9 STOP
–To stop playback
2; PLAY
–To start or interrupt playback
IR Sensor
– Point the remote control towards this
sensor
STANDBY-ON B
– To switch the DVD Player to Standby
mode or ON
Disc slot
– Insert disc here
EJECT /
– To eject the disc
Display
– Shows the current status of the DVD
Player
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
MIC
– For connecting microphone
LEVEL
– Microphone volume control
01-43 DVP5100K_75 26/01/2005, 10:28 AM12

8239 300 34331
13
Functional Overview
Remote Control
Helpful Hint:
Press“STOP” for few seconds to eject
the disc.
PREVIEW MUTE
MUTE
VOCAL
VOCAL
MODE
MODE
KARAOKE
KARAOKE
KEY
RETURN / TITLE
–To go back to previous menu /
show title menu
DISC MENU
– Enters or exits the disc contents
menu
– Switches on or off the playback
control mode (forVCD version
2.0 only)
1 2 3 4
– Selects an item in the menu/
fast backward/forward,slow forward/
backward
OK
–Acknowledge menu selection
S
–To search or select previous
chapter or track
STOP ( 9)
–To stop playback
PLAY ( B)
–To start playback
PAUSE ( ;)
–To pause playback temporarily /
frame-by-frame playback
REPEAT
– Selects various repeat modes
REPEAT (A-B)
– Repeats playback a specific section
on a disc
PREVIEW
–To preview the content of a track
or whole disc
MUTE
– Disables or enables sound output
POWER B
– To switch the DVD player to
standby mode or ON
0-9 numerical key pad
– Selects numbered items in a
menu
DISPLAY
– Displays information onTV
screen during playback
SYSTEM MENU
– Access or exit DVD Player’s
system menu
T
– To search or select next chapter
or track
SUBTITLE
– To access subtitle language in disc
menu
ANGLE
– Selects a DVD camera angle
ZOOM
– Enlarge or reduce a picture on
theTV screen
AUDIO
– To access audio language in disc
menu
KARAOKE
– Display karaoke menu to set MIC
on or off
KEY
– Display karaoke menu to set key
control
VOCAL
– Choose audio channels or
karaoke methods
MODE
– Display karaoke menu
01-43 DVP5100K_75 26/01/2005, 10:28 AM13

8239 300 34331
14
PREVIEWPREVIEW MUTEMUTE
Getting Started
Step 1: Inserting batteries into
the Remote Control
1
3
2
1Open the battery compartment.
2Insert two batteries type R06 orAA,
following the indications (+-) inside
the compartment.
3Close the cover.
Using the Remote Control to
operate the Player
1Aim the Remote Control
directly at the remote
sensor (IR) on the front
panel.
2Do not put any objects
between the Remote
Control and the DVD
Player while operating
the DVD Player.
CAUTION!
–Remove batteries if they are
exhausted or if the Remote Control
is not being used for a long time.
–Do not use old and new or
different types of batteries in
combination.
–Batteries contain chemical
substances, so they should be
disposed properly.
Step 2: Setting up the TV
IMPORTANT!
Make sure you have completed all
the necessary connections. (See
pages 9-10 “Connecting TV”).
1Turn on theTV and set to the correct
video-in channel. You should see the
Philips DVD background screen on the
TV.
2Usually these channels are between the
lowest and highest channels and may be
called FRONT,A/V IN,orVIDEO.See your
TV manual for more details.
➜Or,you may go to channel 1 on your
TV,then press the Channel down button
repeatedly until you see theVideo In
channel.
➜Or,theTV Remote Control may have a
button or switch that chooses different
video modes.
➜Or,set theTV to channel 3 or 4 if you
are using an RF modulator.
3If you are using external equipment,(eg.
audio system or receiver),turn it on and
select the appropriate input source for
the DVD Player output.Refer to the
equipment owner’s manual for detail.
01-43 DVP5100K_75 26/01/2005, 10:28 AM14

8239 300 34331
15
Setting up Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan display twice the
number of frames per seconds than
interlaced scanning (ordinary normalTV
system).With nearly double the number
of lines,progressive scan offers higher
picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1)YourTV can accept progressive signals,
a progressive scanTV is required.
2)You have connected the DVD player to
yourTV usingY Pb Pr (see page 9.)
1Turn on yourTV.
2Turn off yourTV progressive scan mode
or turn on interlaced mode (refer to your
TV user manual.)
3Press POWER on the remote control to
turn on the DVD player.
4Select the correctVideo Input channel.
(See page 14).
➜The DVD background screen appears
on theTV.
5Press SYSTEM MENU.
6Press 2repeatedly to select {VIDEO
SETUP PAGE}.
Set Interlace TV Mode
- - Video Setup Page - -
TV Type
TV Display
Progressive On
Picture Setting Off
7Select {PROGRESSIVE} to {ON},then OK
to confirm.
➜The instruction menu appears on the
TV.
1) ENS RE YO R TV HAS PROGRESSIVE SCAN.
2) CONNECT WITH YPBPR (GBR) VIDEO CABLE.
3) IF THERE IS A DISTORTED PICT RE, WAIT
Cancel
OK
ACTIVATING PROGRESSIVE:
15 SECONDS FOR A TO RECOVERY.
8Press 1to highlight
OK
in the menu
and press OK to confirm.
There will be a distorted picture on
your TV at this state until you turn
on the progressive scan mode on
your TV.
9Turn on yourTV progressive scan mode
(refer to yourTV user manual.)
➜The below menu appears on theTV.
CONFIRM AGAIN TO SE PROGRESSIVE
SCAN. IF THE PICT RE IS GOOD,
PRESS OK B TTON ON REMOTE
Cancel
OK
0Press 1to highlight
OK
in the menu
and press OK to confirm.
➜The set up is complete now and you
can start enjoy the high quality picture.
Getting Started
TIPS: To return to the previous menu,press 1.
To remove the menu,press SYSTEM MENU.
01-43 DVP5100K_75 26/01/2005, 10:28 AM15

8239 300 34331
16
Selecting the colour system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL.In order for a DVD disc
to play on this Player,the colour system of
the Disc,theTV and the DVD Player
should match.
NTSC TV
- - Video Setup Page - -
TV Type PAL
TV Display Multi
Progressive NTSC
Picture Setting
1Press SYSTEM MENU.
2Press 2repeatedly to select {VIDEO
SETUP PAGE}.
3Press 34to highlight {TVTYPE},then
press 2.
Getting Started
4Press 34to highlight one of the options
below:
PAL – Select this if the connectedTV is
PAL system.It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connectedTV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
Multi – Select this if the connectedTV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
5Select an item and press OK.
Helpful Hints:
– Before changing the currentTV
Standard setting,ensure that yourTV
supports the‘selectedTVType’system.
– If there is no proper picture on
yourTV,wait for 15 seconds for auto
recovery.
CHANGING PAL TO NTSC:
1. ENS RE THAT YO R TV S PPORTS
NTSC STANDARD.
2. IF THERE IS A DISTORTED PICT RE
DISPLAYED ON THE TV, WAIT 15
SECONDS FOR A TO RECOVER.
CANCELOK
CONFIRM AGAIN TO SE NEW TV
TYPE SETTING.
CANCELOK
TIPS: To return to the previous menu,press 1.
To remove the menu,press SYSTEM MENU.
To deactivate Progressive manually
●When the distorted picture still
appears on the TV, it may be due to
the connectedTV does not accept
progressive signals,and progressive is set
by mistake. You must reset the unit to
interlace format.
1Turn off yourTV progressive scan mode
or turn on to interlaced mode (refer to
yourTV user manual.)
2Press and hold EJECT on the DVD
player.
3When the disc is ejected,press and hold
EJECT again,and numeric keypad ‘1’
on the remote control at the same time
for few seconds.
➜The DVD blue background screen
will appear on theTV.
01-43 DVP5100K_75 26/01/2005, 10:28 AM16

8239 300 34331
17
Step 3: Setting language
preference
You can select your preferred language
settings.This DVD Player will
automatically switch to the language for
you whenever you load a disc.
Setting the OSD Language
The On-screen language for the system
menu will remain as you set it,regardless
of various disc languages.
Set OSD Language English
- - General Setup Page - -
Disc Lock
Display Dim
Program
OSD Language ENGLISH
Screen Saver
Sleep
DIVX(R) Vod Code
1Press SYSTEM MENU.
2Press 2to select {GENERAL SETUP
PAGE}.
3Press 34to highlight {OSD
LANGUAGE},then press 2.
4Press 34 to select a language and press
OK.
Getting Started
Setting the Audio, Subtitle and Disc
menu language
You can choose your own preferred
language or soundtrack from audio,
subtitles and disc menu languages.If the
language selected is not available on the
disc,the disc’s default language will be
used instead.
Set Preference To English
Audio English
Subtitle French
Disc Menu Spanish
Parental Chinese
PBC Japanese
Password Korean
Divx Subtitle Russian
- - Preference Page - -
1Press STOP twice then,press SYSTEM
MENU.
2Press 2repeatedly to select
{PREFERENCE PAGE}.
3Press 34 to highlight one of the options
below at a time,then press 2.
– ‘Audio’ (disc’s soundtrack)
– ‘Subtitle’ (disc’s subtitles)
– ‘Disc Menu’ (disc’s menu)
4Press 34 to select a language and press
OK.
If the language you want is not in the
list, then select {OTHERS},
then use the numeric keypad (0-9) on
the remote to enter the 4-digit language
code‘XXXX’ (see page 40“Language
Code”) and press OK.
5Repeat steps 3~4for other language
settings.
TIPS: To return to the previous menu,press 1.
To remove the menu,press SYSTEM MENU.
01-43 DVP5100K_75 26/01/2005, 10:28 AM17

8239 300 34331
18
Disc Operations
IMPORTANT!
–If the inhibit icon (ø) appears on
the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
–Depending on the DVD or VIDEO
CD, some operations may be
different or restricted.
–Do not push on the disc tray or
put any objects other than disc on
the disc tray. Doing so may cause
the disc player malfunction.
Playable Discs
Your DVD Player will play:
– DigitalVideo Discs (DVDs)
– Video CDs (VCDs)
– SuperVideo CDs (SVCDs)
– DigitalVideo Discs +
Recordable[Rewritable] (DVD+R[W])
– Compact Discs (CDs)
– MP3/WMA discs,picture (Kodak,JPEG)
files on CD-R(W).
– JPEG/ISO 9660 format
–Maximum 30 characters display.
–Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)
16 kHz, 22.05 kHz, 24 kHz (MPEG-2)
–Supported Bit-rates :32~256 kbps
(MPEG-1), 8~160 kbps (MPEG-2)
variable bitrates
– MPEG-4 disc on CD-R(W):
– Simple profile
–Advanced simple profile (640-480)
– DivX disc on CD-R[W]/DVD+R[W]:
– DivX 3.11, 4.x and 5.x
– Q-pel accurate motion compensation
– Global Motion Compensation (GMC)
playback
SUPER VIDEO
Region Codes
DVD discs must be labeled forALL
regions or Region 4 in order to
play on this Player.You cannot play
Discs that are labeled for other
regions.
Helpful Hints:
–It may not be possible to play CD-R/RW
or DVD-R/RW in all cases due to the type of
disc or condition of the recording.
–If you are having trouble playing a
certain disc,remove the disc and try a
different one. Improper formatted disc will
not play on this DVD Player.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Playing discs
1Connect the power cords of the DVD
Player andTV (and any optional stereo or
AV receiver) to a power outlet.
2Turn on theTV power and set to the
correctVideo In channel. (See page 14
“Setting up theTV”).
3Press STANDBY-ON on the DVD Player
front panel.
➜You should see the Philips DVD
background screen on theTV.
4Insert a disc in the disc slot.
➜Make sure the label side is facing up.
For double-sided discs,load the side you
want to play facing up.
5Playback will start automatically.If not
press PLAY B.
➜If a disc menu appears on theTV,see
page 20“Using the Disc Menu”.
➜If the disc is locked by parental control,
you must enter your six-digit password.
(See page 35).
6Press EJECT /to eject or reload the
disc.
ALL
4
01-43 DVP5100K_75 26/01/2005, 10:28 AM18

8239 300 34331
19
Disc Operations
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
1During playback,press PAUSEÅ.
➜Playback will pause and sound will be
muted.
2To resume normal playback,press
PLAY B.
Selecting track/chapter
●Press S/ Tor use the numeric
keypad (0-9) to key in a track/chapter
number.
➜If repeat mode is active,pressing S/
Twill replay the same track/chapter.
Searching backward/forward
●Press and hold 1/ 2,then press PLAY
Bto resume normal playback.
➜While searching,pressing 1/ 2
repeatedly again will decrease/increase
the search speed.
Stopping playback
●Press Ç.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Selecting various repeat/shuffle
functions
Repeat play mode
●While playing a disc,press REPEAT
continuously to choose a‘Play Mode’.
CHAPTER (DVD)
– to repeat playback of the current
chapter.
TRACK/TITLE (CD/SVCD/VCD/DVD)
– to repeat playback of the current
track (CD/SVCD/VCD)/title (DVD).
ALL
– to repeat playback of all the disc and
all the programmed tracks.
SHUFFLE
– to repeat playback at random order.
OFF
– to cancel the repeat mode.
Helpful Hint:
–ForVCD,repeat playback is not possible
if the PBC mode is switched on.
Repeating a section within a
chapter/track
1While playing a disc,press REPEAT A-B
at your chosen starting point.
2Press REPEAT A-B again at your chosen
end point.
➜The sectionA and B can be set only
within the same chapter/track.
➜The section will now repeat
continuously.
3To exit the sequence,press REPEAT
A-B.
01-43 DVP5100K_75 26/01/2005, 10:29 AM19

8239 300 34331
20
Operations for video playback
(DVD/VCD/SVCD)
Using the Disc Menu
Depending on the disc,a menu may
appear on theTV screen once you load in
the disc.
To select a playback feature or item
●Use 1234keys or numeric keypad
(0-9) on the remote,then press OK to
start playback.
To access or remove the menu
●Press DISC MENU on the remote.
Zooming in
This function allows you to enlarge the
picture on theTV screen and to pan
through the enlarged picture.
1During playback,press ZOOM
repeatedly to display the picture with
different scales.
➜Use 1234keys to pan through the
enlarged picture.
➜Playback will continue.
2Press ZOOM repeatedly to return to
the original size.
Using the OSD menu
OSD menu shows the disc playback
information (for example,title or chapter
number,elapsed playing time,audio/
subtitle language),a number of operations
can be done without interrupting disc
playback.
1During playback,press DISPLAY.
➜A list of available disc information
appears on theTV screen.
Menu
Bitrate 61 Title Remain 0:48:59
Title 01/01
Chapter 09/12
Audio 2CH CHI
Subtitle Off
Menu
Bitrate 71 Total Elapsed 0:01:32
Track 01/01
DiscTime 0:48:53
Track Time 0:48:53
Repeat Off
2Press 34to view the information and
press OK to access.
3Press 2or OK to select an option.
4Use the numeric keypad (0-9) to input
the number/time or press 34to make
the selection,then press OK to confirm.
➜Playback will change to the chosen
time or to the selected title/chapter/
track.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Disc Operations
Resuming playback from the last
stopped point
Resume playback of the last 5 discs is
possible,even if the disc was ejected or
the power switched off.
●Load one of the last 5 discs.
➜“LOAD” appears.
●Press PLAY Band the disc will be played
back from the last point.
To cancel resume mode
●In stop mode,press STOP 9again.
Slow Motion
1Press 34during playback to select the
required speed:1/2,1/4,1/8 or 1/16
(backward or forward).
➜Sound will be muted.
2To return to normal speed,press PLAY B.
Helpful Hint:
–Slow backward is not possible onVCDs.
01-43 DVP5100K_75 26/01/2005, 10:29 AM20